Topic 6: ionic theory and electrolysis
Dakika 21 za kusoma ·
Yaliyomo
Ionic Theory
The Ionic Theory was put forward by Arrhenius in 1880. It was made to account for the phenomena of electrolysis.
The theory states that electrolytes are made up of ions. The ions are built up in certain patterns called crystal lattice.
When these substances dissolve in water, the structure is destroyed. The ions are set free to move.
Concentrated mineral acids such as sulphuric acid, hydrochloric acid and nitric acid do not contain ions. They consist of molecules.
However, when they are diluted, the molecular structure is destroyed and ions are formed.
Electrolytes And Non-Electrolytes
The main purpose of this chapter is to investigate the effects which electricity has on a range of substances. The chapter also develops a thorough explanation of those effects in terms of our present knowledge of atomic structure.
Before we begin, we must become familiar with the terms we will use to explain different phenomena. It is crucial to understand the definitions and meanings of these terms at the start. Then the concepts in this chapter will be easy to understand.
Key terms
- Electrolysis: decomposition of a compound in solution or molten state by passing electricity through it.
- Conductor: a solid substance that allows electricity to pass through it. All metals are included in this class.
- Non-conductor or insulator: a solid substance that does not allow electricity to flow through it. All non-metals fall in this class.
- Electrolyte: a substance which, when dissolved or molten, conducts electricity and is decomposed by it.
- Non-electrolyte: a compound which cannot conduct electricity, be it in molten or solution state.
- Electrode: a graphite or metal pole (rod) or plate through which the electric current enters or leaves the electrolyte.
- Cathode: a negative electrode which leads electrons into the electrolyte.
- Anode: a positive electrode which leads electrons out of the electrolyte.
- Ion: a positively or negatively charged atom or radical (group of atoms).
- Cation: a positive ion which moves to the cathode during electrolysis.
- Anion: a negative ion which moves to the anode during electrolysis.
Non-electrolytes
Liquids such as ethanol, paraffin, petrol and methylbenzene do not conduct electricity. The bonding in these compounds is covalent.
These substances consist of molecules. There are no free electrons or charged particles to flow through them.
Solutions of covalent compounds, for example sugar solution, do not conduct electricity.
These compounds are non-electrolytes. Non-electrolytes exist only in the form of molecules. They are incapable of ionization.
Electrolytes
Ionic compounds contain charged particles (ions). In the solid state, the ions are firmly held in place and are not free to move. So an ionic solid does not conduct electricity.
However, the ions can become free to move if the solid is melted or dissolved in water. Then they can conduct electricity.
For example, solid sodium chloride cannot conduct electricity. When it is melted or dissolved in water, the ions Na+ and Cl– are set free. These ions are then free to move in solution, and so they conduct electricity.
These compounds are called electrolytes.
Weak And Strong Electrolytes
Weak electrolytes
Weak electrolytes are compounds that are only partially or slightly ionized in aqueous solutions.
Some substances, for example ethanoic acid solution, ionize partially.
CH3COOH(aq) ⇔ CH3COO–(aq) + H+(aq)
Most of the electrolyte exists in solution as unionized molecules. For example, in ordinary dilute (2M) ethanoic acid, out of every 1000 molecules present, only 4 are ionized and 996 are unionized.
A solution of ammonia water is also a weak electrolyte. It contains a relatively small proportion of ammonium and hydroxyl ions.
NH4OH(aq) ⇔ NH4+(aq) + OH–(aq)
Most of the organic acids are weak electrolytes, for example tartaric, citric and carbonic acids.
However, there is no sharp dividing line between weak and strong electrolytes.
Water is also a weak electrolyte. It ionizes only slightly.
H2O(l) ⇔ H+(aq) + OH–(aq)
Study shows that for every molecule of water ionized, there are 6 million molecules of water not ionized.
Strong electrolytes
Strong electrolytes are compounds that are completely ionized in aqueous solutions.
When sodium chloride is dissolved in adequate water, it ionizes completely into Na+ and Cl– ions. There are no NaCl solid particles left unionized.
All strong electrolytes ionize completely in solutions. They are the salts, the mineral acids and the caustic alkalis.
The Mechanisms Of Electrolysis
Electrolytic cells of different electrolytes in the molten and aqueous states
The conductivity of ionic compounds is explained by the fact that ions move in a particular direction in an electric field.
This can be shown in experiments with coloured salts. For example, copper (II) chromate (VI) (CuCrO4) dissolves in water to give a green solution.
Experiment steps
- Place the green solution in a U-tube.
- Layer a colourless solution of dilute hydrochloric acid (HCl) on top of the salt solution in each arm.
- Fit graphite rods as shown in figure 13.3. These rods (electrodes) carry the current into and out of the solution.
- Pass the current for a short time.
Observations
The solution around the cathode becomes blue. Around the anode, the solution becomes yellow.
These colours are produced by the movement (migration) of the ions in the salt.
Explanation
The positive copper ions (Cu2+) are blue in solution. They are attracted to the cathode (negative electrode).
The negative chromate ions (CrO42-) are yellow in solution. They are attracted to the anode (the positive electrode).
The use of coloured ions in solution has shown the direction that positive and negative ions move in an electric field.
Always, positive ions (cations) move to the cathode and negative ions (anions) move to the anode.
Ionic Migrations During Electrolysis And The Preferential Discharge Of Ions At The Electrodes
Explain ionic migrations during electrolysis and the preferential discharge of ions at the electrodes:
When a salt such as sodium chloride is dissolved in water, its ions are set free to move. So the solution can be electrolyzed.
Salts, alkalis and acids are dissolved in water, so most of the solutions are aqueous. This makes the electrolysis of such substances in aqueous form more complicated.
The reason is that the water used to dissolve them also ionizes partially. Water is a weak electrolyte.
So at each electrode we get more than one ion for discharge, but only one is supposed to be discharged.
Take an example: the electrolysis of copper (II) sulphate solution using platinum electrodes. By ionic theory, the solution ionizes like this:
CuSO4 (aq) → Cu2+ (aq) + SO42- (aq) (strong electrolyte)
H2O ⇌ H+ + OH- (weak electrolyte)
During electrolysis, Cu2+ and H+ ions move to the cathode. SO42- and OH- ions move to the anode.
Cathode: Cu2+ and H+
Anode: SO42- and OH-
In situations like this, the order of discharge of the ions at the electrode depends on
- the position of the metal ion or radical in the electrochemical series;
- the concentration or nature of the ions (or electrolyte) to be discharged; and
- the nature of the electrodes used.
The Position Of The Ion Or Radical In The Electrochemical Series
Cations, in this order (ease of discharge increases downwards): K+, Ca2+, Na+, Mg2+, Al3+, Zn2+, Fe2+, Pb2+, H+, Cu2+, Ag+
Anions, in this order (ease of discharge increases downwards): SO42-, NO3-, Cl-, Br-, I-, OH-
The arrangement of ions above is the same as that of the electrochemical series.
If all other factors are constant, any ion will be discharged from solution in preference to those above it.
In the copper (II) sulphate example
Cathode: Cu2+ and H+ are present. Cu2+ is discharged.
Cu2+ + 2e- → Cu(s)
Copper is discharged (loses its charge).
Anode: SO42- and OH- are present. OH- is discharged.
4OH- → 2H2O(l) + O2(g) + 4e-
The hydroxyl ion is discharged.
In other words, the reaction at the cathode is reduction (electron gain). The reaction at the anode is oxidation (electron loss).
Result
- At the cathode, copper is deposited.
- At the anode, oxygen is given out (liberated).
- The solution at the end of electrolysis is colourless and acidic. This is because H+ and SO42- ions are left in the electrolyte. They remain moving freely in the solution as ionic sulphuric acid.
The Concentration Or Nature Of The Electrolyte
Take an example: the electrolysis of sodium chloride using platinum electrodes when it is in:
- aqueous solution;
- concentrated aqueous solution; or
- fused or molten state.
Aqueous solution
NaCl → Na+ + Cl-
H2O ⇌ H+ + Oh-
During electrolysis
Cathode: Na+ and H+ are present. H+ ions are discharged in preference to Na+ ions.
2H+ + 2e- → H2(g)
Anode: Cl- and OH- are present. OH- ions are discharged in preference to Cl- ions.
4OH- → 2H2O(l) + O2(g) + 4e-
Result
- At the cathode, hydrogen is given out.
- At the anode, oxygen is given out.
- The concentration of the solution remains constant. All Na+ and Cl- ions remain undisturbed in the solution. This means the Na+ and Cl- ions left in the solution are equivalent to sodium chloride solution.
Concentrated aqueous solution
NaCl → Na+ + Cl-
H2O ⇌ H+ + Oh-
Cathode: Na+ and H+ are present. H+ ions are discharged in preference to Na+ ions, since Na+ and H+ are very far from each other in the electrochemical series.
2H+ + 2e- → H2(g)
Anode: Cl- and OH- are present. Cl- ions are discharged in preference to OH- ions, since Cl- and OH- ions are very close to each other in the electrochemical series (and because there are more Cl- ions in the solution).
2Cl- → Cl2(g) + 2e-
Results
- At the cathode, H2(g) is given off.
- At the anode, Cl2(g) is given off.
- The solution becomes progressively more alkaline as the electrolysis goes on. This is because Na+ and OH- ions remain in solution as caustic soda (sodium hydroxide) solution.
- This is the main method used in the manufacture of sodium hydroxide in industry.
Na+(aq) + OH-(aq) → NaOH(aq)
Fused or molten sodium chloride
NaCl → Na+ + Cl-
During electrolysis
Cathode: Na+ + e- → Na(l)
Anode: 2Cl- → Cl2(g) + 2e-
Result
- At the cathode, sodium is liberated (deposited).
- At the anode, chlorine is given off.
The Nature Of The Electrodes (Inert Vs Active Electrodes)
Take an example: dilute sulphuric acid electrolyzed using platinum electrodes.
H2So4 → 2H+ + So42-
H2O ⇌ H+ + Oh-
Cathode: 2H+ + 2e- → H2(g)
Anode: SO42- and OH- are present. OH- is discharged.
4OH- → 2H2O(l) + O2(g) + 4e-
Result
- At the cathode, H2(g) is given out.
- At the anode, O2(g) is given out.
- The solution becomes acidic at the end of electrolysis. This is because of the acidic ions (SO42-) left in the final solution.
Charge Flow During Electrolysis
The coulomb is the electrolytic unit of charge.
A current of one ampere is the rate of flow of charge equal to one coulomb per second.
The charge is calculated from the number of seconds for which a steady current is passed.
Current in circuit, time taken, total charge
- 1 ampere for 1 second gives 1 coulomb.
- 1 ampere for 10 seconds gives 10 coulombs.
- 20 amperes for 10 seconds gives 200 coulombs.
- A amperes for t seconds gives At coulombs.
Therefore, charge = quantity of electricity (Q) = I × t
Flow Of Charge Required To Liberate 1 Mole Of An Element During Electrolysis
Electrolysis always produces chemical reactions.
Consider a reaction at the cathode in which one mole of silver ions (Ag+) is discharged and deposited.
Ag+ + e- → Ag(s)
In this case, 1 mole of electrons (e-) is required to discharge 1 mole of Ag+ ions. This produces 1 mole of silver atoms (Ag(s)).
1 mole of electrons is a large charge. Experiments show that it is equal to 96500 coulombs.
Therefore, 1 mole of electrons = 96500 coulombs. This is called the faraday.
The number of faradays (moles of electrons) required to liberate 1 mole of an element during electrolysis is deduced from the equation for the electrode reaction.
Example 1
- Sodium: Na+ + e- → Na(s). Faradays: 1
- Copper: Cu2+ + 2e- → Cu(s). Faradays: 2
- Aluminium: Al3+ + 3e- → Al(s). Faradays: 3
- Chlorine: 2Cl- → Cl2(g) + 2e-. Faradays: 2
That is
- 1 faraday is needed to deposit 1 mole of sodium atoms (23 g).
- 3 faradays are needed to deposit 1 mole of aluminium atoms (27 g).
- 2 faradays are needed to liberate 1 mole of chlorine gas (71 g).
Definitions
- The mass of an element liberated by 1 coulomb of electricity during electrolysis is called the electrochemical equivalent of that element.
- The mass of an element deposited or liberated by 1 faraday during electrolysis is called the chemical equivalent of that element.
Experiments To Identify The Products Of Electrolysis When Different Electrolytes Are Used
Perform experiments to identify the products of electrolysis when different electrolytes are used.
Activity 1
Perform experiments to identify the products of electrolysis when different electrolytes are used.
Experiments To Identify The Products Of Electrolysis When Different Electrodes Are Used
Perform experiments to identify the products of electrolysis when different electrodes are used.
Activity 2
Perform experiments to identify the products of electrolysis when different electrodes are used.
Laws Of Electrolysis
Experiments to Relate Masses Liberated and Quantity of Electricity Passed
Carry out experiments to relate masses liberated and quantity of electricity passed.
The laws that give the quantitative results of electrolysis were first stated by a British chemist called Michael Faraday.
The laws say that the amount (in moles) of an element liberated during electrolysis depends on:
- the time of passing the steady current;
- the size (magnitude) of the steady current passed; and
- the charge on the ion of the element.
An Experiment To Verify Faraday'S First Law Of Electrolysis
Carry out an experiment to verify Faraday's First Law of Electrolysis.
Experiments can prove that the amount of a substance liberated during electrolysis depends on these factors.
The product of time (in seconds) and current passed (in amperes) measures electricity. It is called the quantity of electricity.
Quantity of electricity (Q) [coulombs] = current (I) [amperes] × time (t) [seconds]
Q = I × t
Because of this relationship, factors (1) and (2) can be included in the same experiment.
To find the effect of time on the amount of element deposited or liberated, pass a steady current through a solution of the compound of that element for different lengths of time.
The table below shows specimen results. A steady current of 0.21 amps was passed through a solution of copper (II) sulphate for 15, 30, 45 and 60 minutes. The last column shows the mass of copper deposited.
Specimen results for electrolysis of copper (II) sulphate
Current 0.21 amps; time 15 × 60 = 900 s; quantity of electricity 900 × 0.21 = 189 coulombs; mass of copper deposited 0.063 g.
Current 0.21 amps; time 30 × 60 = 1800 s; quantity of electricity 1800 × 0.21 = 378 coulombs; mass of copper deposited 0.129 g.
Current 0.21 amps; time 45 × 60 = 2700 s; quantity of electricity 2700 × 0.21 = 576 coulombs; mass of copper deposited 0.187 g.
Current 0.21 amps; time 60 × 60 = 3600 s; quantity of electricity 3600 × 0.21 = 756 coulombs; mass of copper deposited 0.250 g.
To see the relationship between the copper deposited and the quantity of electricity passed, look at the last two columns of the table. The data can be shown in a graph, as in figure 6.4.
Graph of mass deposited versus amount of electricity passed.
The graph is a straight line passing through the origin. So the mass of copper deposited is directly proportional to the quantity of electricity passed. This agrees with Faraday's First Law.
Faraday's First Law of Electrolysis
The mass of a substance liberated at (or dissolved from) an electrode during electrolysis is directly proportional to the quantity of electricity passing through the electrolyte.
The quantity of electricity is measured in coulombs. A coulomb is the passage of an electric current of one ampere for one second.
Let
- m be the mass of the substance liberated;
- I be the current passed in amperes; and
- t be the time in seconds.
We can write the first law in mathematical form as
m ∝ I × t
or
m = Z × I × t
Z is the proportionality constant. It is called the electrochemical equivalent of the substance liberated.
Electrochemical equivalent is the mass of a substance (element) liberated by 1 coulomb of electricity during electrolysis.
An Experiment To Verify Faraday'S Second Law Of Electrolysis
The third factor mentioned earlier (the charge on the ion) also affects the amount of substance liberated. It can be investigated by experiment.
We want to study the effect of the charge on the ions in solution. So we must keep the quantity of electricity fixed and change the type of ions in solution.
This can be done by passing the same quantity of electricity through two cells. Each cell has ions of different charges.
Apparatus for confirmation of Faraday's Second Law
The experiment uses two voltameters. They are connected in series, as shown. The first is a copper voltameter. The second is a silver voltameter.
The copper voltameter has copper electrodes in a solution of copper (II) sulphate. In this voltameter, copper ions are discharged and deposited at the cathode.
The silver voltameter has silver electrodes in a solution of silver nitrate. The discharged silver ions are deposited at the cathode.
Procedure
- Before starting, clean, dry and weigh the cathode electrode in each voltameter.
- Connect the electrodes to the circuit.
- Pass a suitable current for a measured period of time.
- Remove the cathodes from the voltameters. Clean, dry and reweigh them.
The increase in mass of the two cathodes shows the amounts of copper and silver deposited. The quantity of electricity needed to deposit one mole of each element is calculated using Faraday's Second Law of Electrolysis.
Specimen results
- Current flowing = 0.45 A
- Duration of current flow = 25 minutes
- Mass of copper deposited = 0.221 g
- Mass of silver deposited = 0.755 g
The masses of silver and copper deposited are different. To compare them easily, calculate the number of moles of atoms of each element deposited.
Amount of copper deposited = 0.221/63.5 mole = 0.0035 mole
Amount of silver deposited = 0.755/107.8 mole = 0.0070 mole
Twice as many atoms of silver as atoms of copper are deposited.
The difference comes from the difference in the charges on the ions of the elements.
The charge on the copper ion is twice that on the silver ion. So twice the quantity of electricity is needed to liberate one mole of copper as to liberate one mole of silver.
Faraday'S Second Law Of Electrolysis
This relationship follows Faraday's Second Law of Electrolysis. The law describes the relationship between the amount of element deposited and the charge on the ions of that element.
Faraday's Second Law of Electrolysis states that when the same quantity of electricity is passed through solutions of different electrolytes, the relative numbers of moles of the elements deposited are inversely proportional to the charges on the ions of each of the elements respectively.
To discharge one mole of monovalent ions, 96500 C of electricity are required. Examples of monovalent ions are the hydrogen ion, sodium ion, silver ion and chlorine ion.
This quantity of electricity has been determined by experiment. It is known as the Faraday constant.
The Faraday constant represents one mole of electrons. This is the same as the quantity of electrons required to discharge one mole of silver ions to give one mole of silver atoms.
The validity of Faraday's Second Law of Electrolysis is evident from the following observations:
- One faraday (1F) discharges one mole of H+, Na+, Ag+, Cl– and OH– ions.
- Two faradays (2F) discharge one mole of Cu2+, Pb2+, Mg2+, Ca2+, Fe2+, etc. ions.
- Three faradays (3F) discharge one mole of Al3+, Fe3+, etc. ions.
Relationship Between The Chemical Equivalents Of Elements And Quantity Of Electricity Passed
Here we relate the chemical equivalents of elements to the quantity of electricity passed.
Example
A steady current of 4 amperes is passed through aqueous copper (II) sulphate solution for 1800 seconds. Platinum electrodes are used. Calculate:
- the mass of copper deposited
- the mass of oxygen liberated
Given
- Atomic weight of copper = 63.5
- Atomic weight of oxygen = 16
- 1 Faraday = 96500 C
Solution
Cathode reaction: Cu2+ + 2e– → Cu(s)
Two faradays of electricity are required to deposit one mole of copper atoms (63.5 g).
This means 2 × 96500 C liberates 63.5 g of copper.
Quantity of electricity passed = I × t = 4 × 1800 C.
If 2 × 96500 C liberates 63.5 g, then 4 × 1800 C will liberate 2.4 g of copper.
Therefore, mass of copper deposited = 2.4 g
Anode reaction: 4OH– → 2H2O(l) + O2(g) + 4e–
The reaction shows that 4 moles of electrons (4 Faradays) are lost during the reaction.
Therefore, 4 × 96500 C are needed to liberate one mole (32 g) of oxygen.
Quantity of electricity flowing = 4 × 1800 C
If 4 × 96500 C liberates 32 g, then 4 × 1800 C liberates (4 × 1800 × 32) / (4 × 96500) = 0.6 g.
Therefore, mass of oxygen liberated = 0.6 g
Application Of Electrolysis
Electrolysis has several uses in industry. Its main uses are in the manufacture of chemicals and in the purification of metals. It is used for purification where other methods are either too difficult or too expensive.
Some applications of electrolysis are discussed below.
The Industrial Purification of Copper by Electrolysis
Some metals can be purified by electrolysis. Industry uses this process to purify copper.
Copper for electrical wiring must be very pure, 99.9%. Copper made by roasting the sulphide ore is about 99.5% pure, so it has an impurity level of 0.5%. This level of impurity cuts down electrical conductivity significantly.
This is how the electrolytic purification (refining) is carried out
- The anode is a large block of impure copper.
- The cathode is a thin sheet of pure copper.
- The electrolyte is copper (II) sulphate solution.
During refining, the copper atoms of the impure block become ions. The anode dissolves.
Cu → Cu2+ + 2e–
The ions from the solution become atoms.
Cu2+ + 2e– → Cu(s)
The copper atoms stick onto the cathode. A layer of pure copper builds up on the cathode. As electrolysis takes place, the cathode gains mass as copper is deposited on it.
As a result, the anode gets smaller while the cathode gets bigger as electrolysis proceeds. Eventually the whole anode dissolves.
Only pure copper sticks to the cathode. Most impurities fall to the bottom of the electrolytic cell. They form a solid material called anode sludge or slime. The slime contains small quantities of precious metals such as silver, gold and platinum.
The precious metals recovered from the slime are purified and sold.
(Diagram: Purification of copper by electrolysis)
An Experiment on Electroplating of Metallic Materials
Electroplating is the coating of a metal with a layer of another metal by means of electrolysis.
Electrolysis can be used to coat a thin layer of a less reactive metal onto a more reactive metal. The thin layer of less reactive metal protects the more reactive metal underneath from corrosion. It may also make the product more attractive.
The object to be coated should be made the cathode. The coating material should be the electrolyte.
The most commonly used metals for electroplating are copper, chromium, silver and tin.
Steel can be electroplated with chromium or tin. This prevents the steel from rusting. It also gives the steel a shiny, silver finish.
This is also the idea behind chromium-plating articles such as car bumpers, kettles and bath taps. Chromium does not corrode. It is a hard metal that resists scratching and wear. It can also be polished to give an attractive finish.
Nickel can be electroplated with silver. This makes nickel more attractive.
The diagram below shows how a steel jug is electroplated with silver.
- The jug becomes the cathode of an electrolytic cell.
- The anode is made of silver.
- The electrolyte is a solution of a silver compound, for example silver nitrate.
(Diagram: Silver-plating a steel jug)
At the anode, the silver dissolves and forms ions in solution
Ag → Ag+ + e–
At the cathode, the silver ions receive electrons and form a coat of silver on the jug
Ag+ + e– → Ag(s)
When the layer of silver is thick enough, the jug is removed.
In general, to electroplate any object with metal M, the set-up is
- Cathode – object to be electroplated
- Anode – metal M
- Electrolyte – solution of a soluble compound of M
