Topic 4: the mole concept and related calculations
Dakika 13 za kusoma ·
Yaliyomo
The Mole As A Unit Of Measurement
When carrying out an experiment, a chemist cannot weigh out a single atom, ion, electron, proton or molecule of a substance. These particles are simply very small.
So a counting unit that is useful in practical chemistry must be used.
The standard unit is called one mole of the substance. One mole of each of these different substances contains the same number of particles. The particles can be atoms, molecules, ions, electrons, protons, neutrons, etc.
That number per mole has been worked out by several different experimental methods. It is found to be 6.0 × 10^23.
The value 6.0 × 10^23 is called Avogadro's constant or Avogadro's number. It is abbreviated as L. It is named after the nineteenth-century Italian chemist, Amedeo Avogadro.
How the value 6.0 × 10^23 is obtained
The mass of one atom of carbon-12 is 1.993 × 10^-23 g. The number of atoms present in 12 g of carbon-12 is found as follows:
1 atom = 1.993 × 10^-23 g
X atoms = 12 g
Therefore X = 6.0 × 10^23 atoms.
So the number of atoms in 12 g of carbon-12 is 6.02 × 10^23 atoms. This is also the number of particles in a mole.
Hence, Avogadro's number is the number of atoms in exactly 12 g of carbon-12 isotope.
One mole of any substance contains as many elementary particles as Avogadro's number (constant).
From the above explanation, the mole can be defined as the amount of a substance that contains as many elementary particles as the number of atoms present in 12 g of carbon-12 isotope.
Table: Mass Of One Mole And Particles In It
Each line gives: substance, formula, relative formula mass (Mr), mass of one mole (molar mass), and what this mass contains.
- Carbon, C: Mr = 12. Molar mass = 12 g. Contains 6.0 × 10^23 carbon atoms.
- Iron, Fe: Mr = 56. Molar mass = 56 g. Contains 6.0 × 10^23 iron atoms.
- Hydrogen, H2: Mr = 2 × 1 = 2. Molar mass = 2 g. Contains 6.0 × 10^23 molecules.
- Oxygen, O2: Mr = 2 × 16 = 32. Molar mass = 32 (g). Contains 6.0 × 10^23 molecules.
- Water, H2O: Mr = (2 × 1) + 16 = 18. Molar mass = 18 g. Contains 6.0 × 10^23 formula units.
- Magnesium oxide, MgO: Mr = 24 + 16 = 40. Molar mass = 40 g. Contains 6.0 × 10^23 formula units.
- Calcium carbonate, CaCO3: Mr = 40 + 12 + (3 × 16) = 100. Molar mass = 100 g. Contains 6.0 × 10^23 formula units.
- Silicon oxide, SiO2: Mr = 28 + (2 × 16) = 60. Molar mass = 60 g. Contains 6.0 × 10^23 formula units.
- Fe3+: Mr = 56. Molar mass = 56 g. Contains 6.0 × 10^23 iron(III) ions.
- Cl–: Mr = 35.5. Molar mass = 35.5 g. Contains 6.0 × 10^23 chloride ions.
- e–: no Mr and no mass given. Contains 6.0 × 10^23 electrons.
Other substances which also exist as molecules include
- ozone molecule (gas), O3
- phosphorus molecule (solid), P4
- sulphur molecule, S8, etc.
Counting in groups
In real life, when dealing with large numbers of small objects, it is usual to count them in groups. The objects are grouped and counted in unit amounts.
For example, we buy a carton of soap, a gallon of kerosene, a crate of soda, a dozen of pencils, a ream of papers, etc.
Some Units Of Measurement
- Pair: 1 pair = 2 objects. For example, gloves, shoes, socks and scissors are always sold in pairs.
- Dozen: 1 dozen = 12 objects. For example, a dozen of cups, plates, spoons, etc.
- Gross: 1 gross = 144 objects. For example, a box of blackboard chalk contains 144 pieces of chalk.
- Ream: 1 ream = 500 objects. For example, papers are sold in reams of 500 sheets.
- Mole: 1 mole = 6.02 × 10^23 particles.
In chemistry, extremely small particles are expressed in moles. For example
- 1 mole of atoms = 6.02 × 10^23 atoms
- 1 mole of electrons = 6.02 × 10^23 electrons
- 1 mole of protons = 6.02 × 10^23 protons
- 1 mole of ions = 6.02 × 10^23 ions
- 1 mole of molecules = 6.02 × 10^23 molecules
Molar Quantities Of Different Substances
The mass of one mole of any substance is its atomic mass or molecular mass expressed in grams (or kilograms).
Chemists prefer to express mass in grams, although the SI unit of mass is the kilogram. This is because the amounts of substances chemists usually work with in science laboratories are quite small. If their masses were expressed in kilograms, the numbers used would be extremely small.
Calculating molar mass
You can calculate the molar mass (M) of any substance by adding up the relative atomic masses of its constituent atoms.
For example, ethanol, C2H5OH, contains two carbon atoms, six hydrogen atoms and one oxygen atom. So the molar mass of ethanol is:
Molar mass of C2H5OH = (2 × 12) + (6 × 1) + 16 = 46 g.
In a similar way, molar masses of other compounds can be calculated. For example, the molar mass of sodium chloride, NaCl, is found by adding the relative atomic masses of its constituent elements (Na = 23 and Cl = 35.5):
23 + 35.5 = 58.5 g (g mol^-1).
Important points
- Relative atomic mass or relative molecular mass has no unit.
- Molar masses are always expressed in grams or kilograms.
- The molar mass of a compound is the same as its relative molecular mass.
- The molar mass of an element is the same as the relative atomic mass (Ar) of that element.
- The only difference lies in the units.
Example 1
- M(CO2) = 44 g (or g mol^-1) = molar mass of carbon dioxide
- Mr(CO2) = 44 = relative molecular mass of carbon dioxide
- M(Fe) = 56 g (or g mol^-1) = molar mass of iron
- Mr(Fe) = 56 = relative atomic mass of iron
Similarly, the molar mass of each of the following substances can be calculated using the relative atomic masses of the elements.
Molar Masses Of Different Substances
- Ammonia, NH3: 14 + (1 × 3) = 17 g
- Ammonium chloride, NH4Cl: 14 + (1 × 4) + 35.5 = 53.5 g
- Lead (II) nitrate, Pb(NO3)2: 207 + (14 × 2) + (16 × 6) = 331 g
- Sulphuric acid, H2SO4: (1 × 2) + 32 + (16 × 4) = 98 g
- Calcium carbonate, CaCO3: 40 + 12 + (16 × 3) = 100 g
- Potassium dichromate, K2Cr2O7: (39 × 2) + (52 × 2) + (16 × 7) = 294 g
Application Of The Mole Concept
Known masses of elements, molecules or ions to moles
In experimental work, chemists work with varying masses. They cannot always use one mole of a substance.
The equation that links the mass of a substance to the number of moles present is
Example 2
Convert 49 g of sulphuric acid, H2SO4, into moles.
Given
- Mass = 49 g
- Molar mass = 98 g
Solution
49 g of H2SO4 = 49/98 = 0.5 mol.
Known Volumes Of Gases At S.T.P. To Moles
The volume occupied by one mole of a gas at standard conditions of temperature and pressure (s.t.p.) has been scientifically determined. It is 22.4 dm3.
This volume is called the molar volume of a gas. The molar volume of a gas has the value of 22.4 dm3 at s.t.p.
Remember that 1 dm3 (1 litre) = 1000 cm3.
One important thing about this value is that it applies to all gases.
Therefore, at s.t.p. each of these will occupy a volume of 22.4 dm3
- 32 g of oxygen (O2)
- 17 g of ammonia (NH3)
- 44 g of carbon dioxide (CO2)
- 40 g of argon (Ar)
This makes it easy to convert the volume of any gas at s.t.p. into moles, or moles into volume.
However, note that when the temperature and pressure change, the molar volume also changes.
The number of moles of a given sample of gas is obtained by dividing the volume of the gas by the molar volume (22.4 dm3).
Examples
- 4.4 dm3 of carbon dioxide gas at s.t.p. = 4.4/22.4 = 0.196 mol.
- 2.24 dm3 of neon gas at s.t.p. = 2.24/22.4 = 0.1 mol.
If the volume of the gas is given in cm3, divide it by the molar volume expressed in cm3.
Example
560 cm3 of nitrogen gas = 560 cm3 / 22400 cm3 mol-1 = 0.025 mol.
Alternatively, first convert the volume to dm3. Then divide by the molar volume expressed in dm3. That is, 0.46 dm3/22.4 dm3 = 0.25 mol.
Masses Of Solids Or Volumes Of Known Gases To Actual Number Of Particles
The number of particles in one mole of any substance is 6.02 × 10^23.
To find the number of particles in a substance, we use this expression
N = n.L
where
- N = the number of particles in that substance
- n = the amount of substance (moles)
- L = the Avogadro's constant (6.02 × 10^23)
This conversion needs two steps
- Convert the mass of the solid, or the volume of the gas, to moles.
- Multiply the number of moles by the Avogadro's constant.
Example 1
Convert 5.6 dm3 of ammonia gas to the actual number of ammonia (NH3) molecules.
First, change 5.6 dm3 of ammonia to moles: 0.46 dm3/22.4 dm3 = 0.25 mol.
Then multiply by the Avogadro's constant to get the total number of molecules
0.25 × 6.02 × 10^23 = 1.5 × 10^23 molecules.
Example 2
1.12 dm3 of hydrogen gas = 1.12/22.4 = 0.05 mol.
This is equal to 0.05 × 6.02 × 10^23 = 3.0 × 10^22 molecules.
Alternative method
We may find the number of particles straight from the given volume, without finding the moles first.
We know that one mole (22.4 dm3) of a gas at s.t.p. = 6.02 × 10^23 molecules.
So, 5.6 dm3 = (5.6 × 6.02 × 10^23)/22.4 = 1.5 × 10^23 molecules.
Molar Solutions Of Various Soluble Substances
Prepare molar solutions of various soluble substances
A molar solution is a solution which contains one mole of the compound in one litre (1 dm3 or 1000 cm3) of the solution.
Example 1: sodium hydroxide, NaOH
The molecular weight of this compound is 40 g. Therefore, a molar solution of sodium hydroxide will contain 40 g in 1000 cm3 (1 dm3) of the solution.
Example 2: anhydrous sodium carbonate, Na2CO3
1 mole of this carbonate weighs 106 g. Hence, its molar solution will contain 106 g of the anhydrous salt in 1000 cm3 of solution.
If 0.1 moles (10.6 g) of the solute is dissolved in 1.0 dm3, the solution is 0.1 molar.
But if 0.1 moles is dissolved in 0.1 dm3 of the solution, the solution is still 1.0 molar. This is because 1 dm3 of solution would contain 1.0 mole of the solute.
The molecular weights of some common substances are shown below
Compound: Molecular weight (1 mole)
- Potassium hydroxide, NaOH: 56 g
- Hydrochloric acid, HCl: 36.5 g
- Sulphuric acid, H2SO4: 98 g
- Sodium chloride, NaCl: 58.5 g
- Sodium bicarbonate, NaHCO3: 84 g
- Calcium hydroxide, Ca(OH)2: 74 g
Preparing Molar Solutions
A molar solution of each of these substances can be prepared by dissolving one mole of the substance in 1000 cm3 (1 dm3) of distilled water.
So, 40 g of sodium hydroxide in 1000 cm3 of solution gives a 1.0M solution.
Hence, 20 g of the hydroxide should give a 0.5M solution.
In a similar way, we can make other solution concentrations. They range as follows: 0.1M, 0.2M, 0.3M, 0.4M … 1M, 2M, etc.
In each case, the amount of solution should always be 1000 cm3.
Concentration ranges like these are known as molarities of solutions.
Hence, 0.5M sodium carbonate can also be read as "a sodium carbonate solution with a molarity of 0.5M."
The Concentration Of Solutions
A chemical substance (the solute) is dissolved in a given volume of solvent.
We can measure the "quantity" of solute in two ways
- its mass (in grams)
- its amount (in moles)
The final volume of the solution is usually measured in dm3.
When we measure the mass of the solute in grams, we obtain the mass concentration in g/dm3.
Example 3
Calculate the concentration (g/dm3) of a sodium chloride (NaCl) solution that contains 20 g of sodium chloride in a final solution of 100 cm3.
Solution
- First, convert the given volume to dm3.
Volume (dm3) = 100/1000 = 0.1 dm3
- Then, work out the concentration of the solution. Divide the mass (weight) of solute (g) by the volume (dm3).
Concentration = 20 g / 0.1 dm3 = 200 g/dm3
Alternative method
We can also calculate the concentration without converting the volume into dm3.
If 20 g of solute are contained in 100 cm3 of the solution, then the amount of solute in 1000 cm3 (1 dm3) of the solution is:
1000 × 20/100 = 200 g/dm3
Calculations Based On The Mole Concept
A chemist always wants to know how much of one substance will react with a given amount of another substance.
This is achieved by using balanced chemical equations. Such equations are called stoichiometric equations.
A stoichiometric equation is one in which the reactants and the products are correctly balanced. All the atoms, ions and electrons are conserved.
Such an equation gives the correct mole ratios of reactants and products in chemical reactions.
This quantitative relationship is called stoichiometry.
Consider the equation for the reaction between hydrogen and nitrogen to produce ammonia
3H2(g) + N2(g) → 2NH3
This can be read as follows: three moles of hydrogen react with one mole of nitrogen to yield two moles of ammonia.
The numbers 3, 1 and 2 are called stoichiometric coefficients. They tell us the proportions in which the substances react and in which the products are formed.
Example 4
What volume of carbon dioxide (CO2), measured at s.t.p., will be produced when 21.0 g of sodium hydrogencarbonate (NaHCO3) is completely decomposed according to this equation?
2NaHCO3(s) → Na2CO3(s) + CO2(g) + H2O(l)
Solution
- First, find the weight of carbon dioxide that will be produced by the hydrogencarbonate.
Mass of 2NaHCO3 = 2 × 84 = 168 g
Mass of CO2 = 44 g
The weight of carbon dioxide produced is found from this relation
168 g ≡ 44 g
21 g ≡ X
X = 21 × 44/168 = 5.5 g
The weight of carbon dioxide produced = 5.5 g
- Then, convert this weight of CO2 to volume at s.t.p.
We know that one mole (44 g) of carbon dioxide at s.t.p. occupies 22.4 dm3.
That is, 44 g ≡ 22.4 dm3
5.5 g ≡ X dm3
X = 5.5 × 22.4/44 = 2.8 dm3
