Chemistry · Kidato 3

Topic 1: chemical equations

Dakika 12 za kusoma ·

Yaliyomo

Chemical Equations

A chemical equation is a representation of a chemical reaction. It uses symbols and formulae of the substances involved in the reaction.

It is a chemical shorthand. It shows the substances that combine (the reactants). It also shows the substances formed as a result of the reaction (the products).

Molecular Equations

A molecular equation shows the reactants combining and the products formed. It shows them in their elemental or molecular forms in a chemical reaction.

An example is the reaction between sodium and water. It produces sodium hydroxide solution and hydrogen gas:

2Na(s) + 2H2O(l) → 2NaOH(aq) + H2(g)

In this example, sodium (in elemental form) reacts with water (in molecular form). They produce sodium hydroxide (in molecular form) and hydrogen gas (in molecular form).

Word Equations For Given Chemical Reactions

A word equation is a short way of expressing a chemical reaction in words.

Chemical reactions can be summarized by word equations. These show all the reactants and the products. This type of equation links together the names of the reactants and the products.

Example 1: the burning of magnesium in air to produce magnesium oxide

Magnesium + Oxygen → Magnesium oxide

Example 2: the reaction between sodium and chlorine to give sodium chloride (common salt)

Sodium + Chlorine → Sodium chloride

Equations like these sometimes give us some information about the products formed when different substances react together. But equations can be made even more useful by writing them with chemical symbols and formulae.

Requirements For Representing A Chemical Reaction

Any method for representing a chemical reaction must meet certain basic requirements. These are:

  • The chemical nature of the reactants and of the products must be clear. The reactants can be in solid, gaseous, liquid or aqueous forms.
  • The mole ratios in which the reactants combine and the products are formed must be deducible. This means that the atoms of the reactants and the products must be balanced.
  • The direction of the reaction must be established. This means it should be clearly shown which substances are the reactants and which are the products. This is normally done by separating the reactants from the products with an arrow. The arrow points from the reactants to the products.

Example: the reaction between potassium and water

2K(s) + 2H2O(l) → 2KOH(aq) + H2(g)

In this reaction, the three requirements have been met

  • The chemical nature of the reactants has been shown: potassium (solid) and water (liquid). The chemical nature of the products has also been shown: potassium hydroxide (aqueous) and hydrogen (gas).
  • The mole ratios are clearly shown. 2 moles of potassium combine with 2 moles of water. They produce 2 moles of potassium hydroxide and 1 mole of hydrogen gas.
  • The reactants (potassium and water) and the products (potassium hydroxide and hydrogen) are separated by an arrow (→). The arrow also shows the direction of the reaction.

How To Predict Reaction Products

To predict the reaction products precisely, you must take into account the type of reaction that is occurring. Once you identify the type of reaction, you can tell the possible products.

A chemical reaction has taken place when two or more chemical substances, called reactants, are converted into very different chemical substances, called products.

There are a few ways to predict reaction products

  • When the reactants are mixed and then isolated, the products can be identified.
  • Prediction can be made when elements from the same group in the Periodic Table show similar reactions.
  • Chemical reactions can be classified into different categories. These are combination (or synthesis), decomposition, displacement, precipitation, and redox reactions. They are described in detail below.

Types Of Chemical Reactions

When a chemical reaction occurs, changes have taken place. However, under ordinary conditions it is not easy to see how a reaction goes on.

For example, neutralization of an acid solution with an alkali produces no change that you can see. However, a reaction has happened. The temperature of the mixture increases. New substances have formed, and they can be separated and purified.

We can tell whether a reaction has taken place if one or more of the following changes are observed:

  • A heat change has taken place. It can be detected by a change in the temperature of the products.
  • A precipitate is formed.
  • There is a change in state of the reactants, that is, gas, liquid or solid.
  • A colour change has occurred.
  • A gas is evolved. It can be identified by its colour, smell or by effervescence.

There are very many different chemical reactions. To make them easy to study, it is useful to group certain types of reactions together. They may be grouped according to certain types of phenomena which accompany them. They can be further subdivided into categories, each with its own unique characteristics.

Some types of chemical reactions are discussed below.

Combination Or Synthesis (A + B → C)

A synthesis reaction occurs when two or more simple substances (elements or compounds) combine to form one new and more complex substance.

The general form of a synthesis reaction is

element or compound + element or compound → compound

The best example of this kind of reaction is the reaction between iron and sulphur to form iron (II) sulphide. Iron combines directly with sulphur:

Fe(s) + S(s) → FeS(s)

Another example is the reaction between hydrogen and oxygen to form water

Hydrogen + Oxygen → Water

Decomposition (A → B + C)

Decomposition occurs when one compound breaks down into simpler substances.

All decomposition reactions have one thing in common: there is only one reactant. It breaks down into two or more simpler products.

Decomposition can be brought about by heat, light, electricity and even enzymes or catalysts.

Decomposition by heat

Decomposition caused by heat is called thermal decomposition.

An example is the decomposition of calcium carbonate (limestone). When heated, it breaks down into calcium oxide (quicklime) and carbon dioxide gas.

Calcium carbonate → Calcium oxide + Carbon dioxide

Formula Equations Using Chemical Symbols

Writing formula equations using chemical symbols

A chemical reaction can be expressed in two forms. It can be a word equation, or it can be a formula (or symbolic) equation. We have already seen how chemical equations can be represented by words (word equation).

A formula equation uses chemical symbols and formulae to represent a chemical reaction.

An example is the reaction between iron and sulphur to form iron (II) sulphide

Fe + S → FeS

Steps for writing a chemical equation

Follow these steps when writing a chemical equation.

  1. State the reaction in words. For example: carbon reacts with oxygen to form carbon dioxide.
  1. Write the complete word equation. Use an arrow to separate the reactants from the products:

Carbon + Oxygen → Carbon dioxide

By convention, the reactants are placed on the left-hand side and the products on the right-hand side. The arrow from left to right shows that the reaction proceeds from reactants to products.

  1. Change the words into the correct symbols and formulae of the reactants and products:

C + O2 → Co2

  1. Balance the number of each type of atom on each side of the equation.

The number of each kind of atom on the left must equal the number on the right. This makes the equation obey the Law of Conservation of Mass (or Indestructibility of Matter).

The Law of Conservation of Mass says that matter can neither be created nor destroyed in the course of a chemical reaction.

This means the total mass of all products of a chemical reaction is equal to the total mass of all reactants.

All atoms on the left-hand side must also appear on the right-hand side. No atom should appear as a product if it is not present as a reactant.

  1. Add the state symbols.

Reactants and products may be solids, liquids, gases or solutions. You show their state by adding state symbols to the equation.

The state symbols are

  • (s) for solid
  • (l) for liquid
  • (g) for gas
  • (aq) for aqueous solution (solution in water)

For the two reactions above, the equations with state symbols are

Fe(s) + S(s) → FeS(s)

C(s) + O2(g) → CO2(g)

All state symbols must be in brackets. They are placed as subscripts after the reactant(s) and product(s).

Balancing Chemical Equations

A balanced chemical equation has an equal number of atoms of each element in the reactants and the products, on both sides of the equation.

A balanced equation gives us more information about a reaction than a simple word equation does.

Steps for working out a balanced equation

  1. Write the chemical equation for the reaction. Use the correct symbols and formulae of the reactant(s) and the product(s).
  1. Identify the different atoms of the different elements in the reactant(s) and the product(s).
  1. Check whether these atoms are equal on both sides of the equation. Some atoms may balance directly.
  1. Balance the atoms on each side of the equation by the Hit and Trial Method.
  1. Add state symbols.

Example 1

The reaction between hydrogen and oxygen to produce water.

Hydrogen + Oxygen → Water

H2 + O2 → H2O (not balanced)

The atoms involved are hydrogen and oxygen. These are the atoms we are going to balance. They must be equal on both sides of the equation.

There are two hydrogen atoms on each side. But there are two oxygen atoms on the left-hand side (LHS) and only one oxygen atom on the right-hand side (RHS).

To balance the oxygen atoms, we write 2 before water.

H2 + O2 → 2H2O (not balanced yet)

Writing 2 before water has created another problem. Now there are 4 hydrogen atoms on the RHS but only 2 on the LHS.

To make the hydrogen atoms equal, we write 2 before hydrogen on the LHS.

2H2 + O2 → 2H2O (balanced)

You can still check whether the atoms are balanced. Look at the number of atoms on each side of the equation.

Now the number of hydrogen atoms and oxygen atoms is the same on both sides. This is because atoms do not disappear during a reaction. They are neither created nor destroyed. They obey the Law of Conservation of Mass.

When the numbers of the different atoms are the same on both sides, the equation is said to be balanced.

Once the equation is balanced, you can add the state symbols.

2H2(g) + O2(g) → 2H2O(l)

This gives a standard and acceptable chemical equation.

An equation which is not balanced is not correct. An unbalanced equation implies that atoms have been created or destroyed. It is therefore wrong, and calculations based on it are certainly unreliable.

Remember

We cannot change the formulae of the substances in the reaction. These are fixed by the bonding in the substance itself.

For instance, to balance the oxygen in water, H2O, we cannot write H2O2.

We can only put a multiplying number before the symbols and formulae, for example 2H2O.

Example 2

Hydrogen burns in oxygen to form water. The equation for the reaction is

2H2(g) + O2(g) → 2H2O(l)

Questions

  1. How much oxygen is needed to burn 1g of hydrogen?
  2. How much water is formed when 5g of hydrogen is completely burned in oxygen?

(Atomic weights: H = 1, O = 16)

Solution

  1. Reaction equation: 2H2(g) + O2(g) → 2H2O(l)

Atoms present: H : O

Molecular weights: 4 : 32

Reacting weights: 1g : Xg

The weight, X, of oxygen = 1 × 32 ⁄ 4 = 8g

So, 1g of hydrogen needs 8g of oxygen.

Ionic Equations

Ionic equations are equations in which the reacting substances are written in ionic form after the spectator ions have been removed.

In other words, an ionic equation is written so that spectator ions are not included in the final equation.

Spectator ions are ions that do not change during the reaction. They do not take part in the chemical reaction.

To derive an ionic equation from a molecular equation, you must know the solubility rules. They are given below.

Solubility Rules

  • All sodium, potassium and ammonium salts are soluble.
  • All nitrates, chlorates and acetates are soluble.
  • All binary compounds of the halogens (other than F) with metals are soluble, except those of silver, copper, lead and mercury. Lead halides are soluble in hot water.
  • All sulphates are soluble, except those of silver, lead, mercury (I), barium, strontium and calcium.
  • All carbonates, sulphites and phosphates are insoluble, except those of ammonium and alkali metal (Group I) cations.
  • All hydroxides are insoluble, except those of ammonium, barium and alkali metal (Group I) cations.
  • All sulphides are insoluble, except those of ammonium, alkali metal (Group I) cations and alkaline earth metal (Group II) cations.
  • All oxides are insoluble, except those of calcium, barium and alkali metal (Group 1) cations. These soluble oxides actually react with water (they hydrolyse) to form hydroxides.

Balanced Ionic Equations

Steps for writing balanced ionic equations

  1. Write a balanced formula equation for the reaction.
  1. Split all soluble reactants and products into individual ions. Clearly show their state symbols. Remember that some substances exist as molecules and do not consist of ions. They do not ionize in water. These are water, gases, concentrated mineral acids, precipitates and neutral atoms.
  1. Cancel out all the ions that appear on both sides of the equation. These are the spectator ions. They remain unchanged in the reaction.
  1. Re-write the remaining ions. This is the net ionic equation for that reaction.

Example 3

Consider the neutralization of hydrochloric acid with sodium hydroxide.

Step 1: HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)

Step 2: H+(aq) + Cl–(aq) + Na+(aq) + OH–(aq) → Na+(aq) + Cl–(aq) + H2O(l)

Step 3: Cancel the ions on both sides (Na+ and Cl–). These are the spectator ions.

Step 4: H+(aq) + OH–(aq) → H2O(l)

Jaribu quiz ya ChemistryMaswali 30