Topic 6: periodic classification
Dakika 14 za kusoma ·
Yaliyomo
Periodic Classification
Constructing the modern periodic table has been a major scientific achievement.
The first steps towards working out this table were taken long before anyone had any idea about the structure of atoms.
The number of elements discovered increased steadily during the 19th century. Chemists began to find patterns in their properties.
The Law Of Triads
In 1817, the German scientist Johann Dobereiner noticed that calcium, strontium and barium had similar properties. He also noticed that the atomic weight of strontium was halfway between the other two.
He found the same pattern with chlorine, bromine and iodine. He also found it with lithium, sodium and potassium.
So, he put forward the Law of Triads
"If elements are arranged in groups of three in order of increasing atomic weights, having similar properties, then the atomic weight of the middle element is the arithmetic mean of the atomic weights of the other two elements."
Examples of Dobereiner's triads
- Lithium, Sodium and Potassium
- Calcium, Strontium and Barium
- Chlorine, Bromine and Iodine
- Iron, Cobalt and Nickel
The Law Of Octaves
In 1863, John Newlands, an English chemist, noted that there were many pairs of similar elements. In each pair, the atomic weights differed by a multiple of 8.
So, he produced a table with the elements in order of increasing atomic weights. He put forward the Law of Octaves:
"If elements are arranged in order of their increasing atomic weights, the properties of the 8th element, starting from a given one, are a kind of repetition of the first element."
This finding was comparable to the 8th note of music. This is why the word "octave" was used.
This was the first table to show a periodic or repeating pattern of properties.
But it was not widely accepted because there were too many inconsistencies. For example
- He put copper and sodium in the same group, even though they have very different properties.
- Iron was placed in the same group as oxygen and sulphur.
The Periodic Law
Dmitri Mendeleev was born in Siberia, Russia, in 1834. By the time he was 32, he was a professor of Chemistry.
In 1869, Mendeleev advanced the work done by Newlands and contributed very useful new ideas.
He began by listing all the known elements in order of increasing atomic mass. He spotted that elements with similar properties appear at regular intervals or periods down the list.
His findings were the basis for the Periodic Law
"The properties of elements are a periodic function of their atomic masses."
What Mendeleev did
- He placed similar elements into groups.
- He realized that not all elements had been discovered. So, he left gaps for new ones in the correct places in his table.
- He swapped the order of some elements to make them fit better.
- He predicted the properties of the missing elements from the properties of the elements above and below them in the table.
- He listed separately some elements which did not appear to fit into any group, i.e. iron, cobalt, nickel, etc.
Table 6.1: Mendeleev's short form of the Periodic Table
The table had 9 vertical columns, which he called Groups. The groups were numbered from 0 to 8.
The elements in group 0 were not known by then, but were discovered later on.
Groups 1 to 7 were subdivided into A and B subgroups.
Group 0 included the transition elements. Noble gases were later placed in group 0.
There were 7 horizontal rows, which he called periods.
All vacant positions in the table stood for new elements yet to be discovered.
Usefulness of Mendeleev's classification
- The table summarized a large amount of information about the elements based on their chemical properties.
- The table was very useful in predicting the existence and properties of undiscovered elements, for which gaps had been left in the table.
- The table was also used in checking relative atomic masses of elements.
Limitations of Mendeleev's classification
- In three cases, pairs of elements had to be included in one group in inverse order of their atomic weights. This was so that they would fit into groups of elements having similar properties.
- These pairs were argon (39.9) and potassium (39.1), cobalt (58.9) and nickel (58.9), and tellurium (127.5) and iodine (126.9).
- This difficulty was resolved when the basis of classification was changed to the atomic number instead of the atomic mass.
- The elements that were placed in group VIII formed an incompatible mixture.
- Two different families were placed in one group, e.g. K and Cu; Ca and Zn, etc.
The Modern Periodic Table
The periodic table is the chemist's map. It helps you understand the patterns in chemistry.
Today we take it for granted. But it took hundreds of years, and the work of hundreds of chemists, to develop.
The Modern Periodic Table is similar to that of Mendeleev, but contains several improvements:
- Elements are arranged in order of atomic number instead of atomic mass. This means that elements no longer have to swap places to fit correctly.
- Many new elements have been discovered and slotted into the spaces left by Mendeleev.
- Metals and non-metals are clearly separated.
The Modern Periodic Table is shown in Figure 6.1.
Figure 6.1: The Modern Periodic Table
The long form of the periodic table is the commonly used form of the periodic table.
The elements in the table are arranged based on their atomic weights. They start from hydrogen (1), helium (2), lithium (3), beryllium (4) and so on.
The elements appear in vertical columns and horizontal rows.
The vertical columns in the table are called Groups. They are numbered I, II, III, IV, V, VI, VII and 0. Group 0 is also known as group VIII.
Group I contains the elements lithium (Li), sodium (Na), rubidium (Rb), caesium (Cs) and francium (Fr).
Group II consists of elements starting from sodium (Na) down to radium (Ra).
Some of the groups have special names
- Group I is often called the alkali metals.
- Group II is called the alkaline earth metals.
- Group VII is called the halogens.
- Group 0 is called the noble gases.
Transition Metals
The transition metals (or elements) form a separate block in the middle of the periodic table, between group II and group III.
The atoms of these elements have more complicated electron arrangements.
This group contains many common metals such as iron (Fe), nickel (Ni), copper (Cu) and zinc (Zn).
One interesting property of these elements is that they form coloured compounds.
Main Features Of The Modern Periodic Table
- The elements are placed in order of their atomic numbers instead of their atomic masses.
- There are a total of 18 groups and 7 periods.
- There are 5 blocks of similar elements in the periodic table, as shown in figure 6.2.
- The normal (non-transition) elements (groups 1-7) have their outermost shells incomplete. This means they can allow additional electrons to enter their outermost orbital (valency shell). But each of their inner shells is complete.
- The transition metals have their outermost shell and their penultimate (second last) shell incomplete.
- Elements of group 0 (noble gases) have complete shells. These elements show little reactivity.
- Because they are very unreactive, noble gases were once called "inert" gases. They were also called "rare gases" because they were rarely found.
- Mendeleev left gaps for undiscovered elements. These gaps (now occupied by the transition elements and the noble gases) have been filled by the respective elements after their discovery. Man-made elements have also found a place in the periodic table.
- Metals have been clearly separated from non-metals. Metalloids or semi-metals (poor metals) have also been included.
Metalloids
Metalloids are elements whose properties are intermediate between metals and non-metals.
They include boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb) and tellurium (Te).
In some publications, germanium and antimony are usually classed as poor metals, and the rest as non-metals.
Periodicity
The concept of periodicity
Consider the electronic configuration of the first twenty elements of the periodic table, shown in Table 6.3.
Table 6.3: Electronic configurations of the first 20 elements
You will notice that elements in the same vertical column (group) have the same number of electrons in the outermost shells of their atoms.
The outer electrons determine the chemical properties of an element. So the elements in each group tend to resemble each other closely in chemical behaviour.
For instance, the noble gases He, Ne and Ar show chemical inertness. This is characterized by the stable outer electron octet or duplet.
For this reason, compounds of the noble gases with other elements have not been found.
Attempts to classify elements by arranging them in order of increasing atomic weights showed that the properties of elements were periodic. This means elements with similar or comparable properties appear after a certain specific interval in a given arrangement.
The occurrence of successive groups of elements showing strong chemical similarity in this way is called periodicity.
Therefore, periodicity is the repetition of similar chemical properties of elements after a certain specific interval in a given arrangement.
The repetition in properties is due to the repetition of similar electronic configuration of the outermost shells of elements after certain intervals.
General Trends
General trends refer to the change in some properties of elements across the periods and down the groups in the periodic table.
These trends become more obvious if we leave aside the noble gases in Group 0.
We shall concentrate only on variations in the most important properties of the elements.
The following is a summary of the change in some properties of elements down the groups and across the periods.
The Change In Properties Of Elements Across The Periods
Atomic and ionic size
The sizes of atoms and ions may be given in terms of atomic radius and ionic radius units respectively.
The number of shells an atom or ion has, and the nuclear charge, determine the size of the atom or ion.
This is how the two properties vary along the period and down the group.
Atomic size
Along the period: considering the normal elements only, the size of atoms decreases from left to right across the period.
This is because the atomic number increases across the period. The nuclear charge (due to increasing protons) increases, and the electrons in the shells are pulled closer to the nucleus.
Ionic size
Positive ions (cations): across the period, the ionic size does not change. It remains the same as you move across the period from either direction.
Negative ions (anions): a negative ion is larger than the corresponding neutral atom. This is because one or more electrons are added to the atom when the ion forms.
The added electron(s) are repelled by the electron(s) already present in the outermost shell. This increases the size of the atom, even though no new shell is formed.
Down the group and along the period: ionic size increases down the group, and also along the period, that is, from left to right.
Atomic radii (singular: radius)
Along the period: atomic radii decrease from left to right as the atomic number increases.
Electronegativity
Electronegativity is the tendency of an atom to attract the shared pair of electrons towards itself in a molecule.
The electronegativity value of elements in group 0 (inert gases) is zero.
Along the period: electronegativity increases from left to right across the period in the periodic table.
Metallic character (or electropositivity)
Electropositivity is the tendency of an element to lose its valency electron(s) and donate them to other elements (usually non-metallic elements).
This process occurs during the formation of new substances, for example molecules and compounds.
Such reactions usually occur between metals and non-metals. Metals donate electrons and non-metals receive these electrons.
So, metals are electropositive elements, while non-metals are electronegative elements.
Along the period: generally, metallic character decreases from left to right.
The gradation in metallic properties across the period is as follows
Metals → poor metals → metalloids → non-metals → noble gases
Chemical reactivity
Reactivity is the tendency of an element to lose or gain electrons in a chemical reaction.
Along the period: for metals, reactivity decreases from left to right in a period. For non-metals, it increases.
Ionization Energy Or Ionization Potential (I.E Or I.P)
Ionization energy is the minimum amount of energy required to remove the most loosely bound electron from an isolated atom or ion in its gaseous state.
The smaller the value of ionization energy, the easier it is to remove the electron from the atom.
M(g) → M+(g) + e-
Along the period
Ionization energy increases along the period from left to right, with the increase in atomic number.
ELECTRON AFFINITY (Ea)
Electron affinity is just the opposite of I.E.
It is the amount of energy released when an extra electron is added to an isolated neutral atom in its gaseous state.
Along the period
The value increases along the period from left to right.
Density And Melting Point
The density of a substance is the ratio of its mass to its volume.
The melting point is the temperature at which a solid substance turns into liquid at standard atmospheric pressure.
- Density, across the period: Densities decrease across the period from left to right.
- Melting point, across the period: Melting points of elements decrease across the period from left to right.
The Change In Properties Of Elements Down The Groups
Atomic And Ionic Size
- Atomic size, down the group: Atomic size increases as you move down the group.
- Ionic size:
Positive ions (cations), down the group
On descending the group, the nuclear charge increases. The number of shells increases by one at each step. So the ionic size also increases.
A positive ion is smaller than the corresponding neutral atom. This is because, on forming the ion, the metal atom loses both the valency electron(s) and the outermost shell.
Valency electron(s) are the electron(s) in the outermost shell of an atom.
Any further removal of electron(s) from the ion will decrease the ionic size further.
Negative ions (anions), down the group and along the period
Ionic size increases down the group. It also increases along the period, that is, from left to right.
Atomic Radii (Singular: Radius)
Atomic radius is the distance from the center of the nucleus to the outermost shell (valency shell).
Down the group
Atomic radii of elements increase down the group, with the increase in atomic size.
Electronegativity
Down the group
Electronegativity decreases while moving downwards in a group.
Metallic Character (Or Electropositivity)
Down the group
Metallic character (electropositivity) increases down the group.
Ionization Energy Or Ionization Potential (I.E Or I.P)
Down the group
Ionization energy decreases gradually down the group.
Why is there a decrease in I.E as you go down the group?
Electrons are held in their shells by their attraction to the positive nucleus.
As you go down the group, the size of the atom increases (increasing atomic radius).
So the outermost electron(s) of an atom get further and further away from the attraction or pull of the positive nucleus.
Hence, little energy is required to remove them from the atom.
ELECTRON AFFINITY (Ea)
Down the group
The value of electron affinity decreases down the group.
Density And Melting Point
- Density, down the group: Densities of elements increase down the group.
- Melting point, down the group: Melting points of elements decrease down the group, as the elements become less metallic in nature.
Electronic Configuration To Locate The Positions Of Elements In The Periodic Table
The modern periodic table is based on the electronic configurations of the elements.
Look at table 6.3. Study the electronic configurations of the first twenty elements and where they are placed in the periodic table.
Beryllium, magnesium and calcium have two electrons in the outer shell. These elements are in Group 2.
This pattern continues to Group 3, Group 4 and so on.
The group number in the periodic table is the same as the number of electrons in the outermost shell.
The halogens are the elements in Group 7. Bromine is one of the halogens.
Question: How many electrons does each bromine atom have in its outer shell?
As we move down each group, the number of shells increases by one at each step. Each atom of an element has one complete shell more than the one above it.
As we move across each period, the outer shell is being filled by one electron at each step.
Certain electronic configurations are found to be more stable than others.
The noble gases at the end of each period have full outer shells. They have a stable duplet (2 electrons) or octet (8 electrons) in their outermost shells.
This makes them more difficult to break up. This fits well with the fact that they are so unreactive.
The outer electrons of an atom are mainly responsible for the chemical properties of an element.
Therefore, elements in the same group will have similar chemical properties.
