Topic 5: atomic structure
Dakika 13 za kusoma ·
Yaliyomo
The Atom
We learned early that matter is made up of small, indivisible particles.
Everything around us is made of extremely small particles. These particles are either molecules or atoms.
An atom is the smallest indivisible particle of an element that takes part in a chemical change.
Atoms are the building blocks of matter. All solids, liquids and gases are made of atoms fitted in different ways.
Present-day chemistry is built on the foundations of the Atomic Theory. The idea that elements are made up of atoms is called the Atomic Theory.
An English chemist, John Dalton, was the first to put forward the Atomic Theory. For most of the 19th century, the theory stated that atoms were hard, extremely small, indivisible and spherical particles, like minute lead shots.
Dalton'S Contribution To Atomic Structure
The Greek philosopher Democritus (460-370 BC) believed that matter was indestructible. He believed it is made up of tiny particles called atoms.
Our modern understanding is based on the Atomic Theory, which was put forward by John Dalton in 1808.
His theory re-introduced the ideas of Democritus and other Greek philosophers. They suggested that all matter was infinitely divided into very small particles called atoms.
These ideas were not widely accepted at that time. They were only revived when Dalton developed them further and experimental science was able to back them up with practical observations.
Why do we say "Dalton's Atomic Theory"?
The Atomic Theory goes back to the ancient Greeks, yet today we always talk about Dalton's Atomic Theory. There is a good reason for this.
The Greeks put forward the idea that atoms exist, but they did nothing more. They left the idea vague and untested.
Dalton changed this vague imagining into a set of concrete suggestions about atoms, which could be tested by experiment. This change from vagueness to precision and experimental test justifies his claim to the theory.
Dalton's Atomic Theory contains the following main ideas
- Matter is made up of small, indivisible particles called atoms.
- Atoms of the same element are all exactly alike in every way and have definite weights.
- Atoms are indestructible and they cannot be created.
- Atoms of different elements have different weights and possess different properties.
- Atoms of different elements combine in small whole numbers to form "compound atoms".
The Modern Concept Of Dalton'S Atomic Structure
From the theory, it is observed that each atom has its own mass. It is also observed that chemical combination takes place between atoms and not fractions of atoms.
Discoveries made in the 20th century showed that certain parts of the theory must be modified.
However, Dalton's Theory was one of the great leaps of understanding in chemistry. It meant that we could explain many natural processes.
Dalton's Atomic Theory was the first step towards the formation of the Modern Atomic Theory. His theory has been subjected to numerous experiments, which have led to some modifications. However, some ideas in his theory still hold strongly to date.
Some modifications to the theory include the following
- The atom is no longer regarded as indivisible, or as the smallest particle. Particles smaller than the atom are now known. They are electrons, protons and neutrons. However, the atom is still the smallest particle which can take part in a chemical reaction.
- Atoms of the same element may not be all alike. Some elements have atoms with different atomic masses, for example carbon 12 and carbon 14. These different atoms of the same element are called isotopes.
- In a few cases, atoms of different elements may have the same atomic mass. Both argon and calcium have atomic mass 40. Such atoms are called isobars.
- Dalton's "compound atoms" are known as molecules. A molecule is the simplest particle of matter which is capable of independent existence. There is evidence that atoms of different elements can combine in large whole numbers. Examples are organic compounds and silicon compounds.
- Atoms are no longer regarded as indestructible. Radioactive atoms may be destroyed by spontaneous decay or by atomic fission. The atom is therefore the smallest particle of an element which is responsible for the chemical properties of that element, and which takes part in a chemical reaction.
Sub-Atomic Particles
Dalton thought that atoms were solid, indivisible particles. But in recent years this idea has changed greatly, mainly because of work done by Lord Rutherford.
According to Rutherford, the atom consists of 3 kinds of particles: protons, neutrons and electrons. These are called sub-atomic particles.
The nucleus
The centre of the atom is called the nucleus. The nucleus contains a cluster of two sorts of particles, protons and neutrons.
The nucleus is very small. It occupies only about 1% of the volume of an atom. The rest of the atom is mostly empty space, with electrons spread out in it.
Electrons and charges
Electrons move around the nucleus in special paths called electron shells (also called orbits, orbitals or energy levels).
Protons and electrons have electric charges. Neutrons have no charge.
All the particles in an atom are very light. Their masses are measured in atomic mass units rather than grams.
The proton
The proton is a positively charged particle. Its mass is about equal to that of a hydrogen atom.
The neutron
The neutron has no charge. It is neutral. Its mass is about equal to that of a hydrogen atom.
The electron
The electron is negatively charged. Its charge is equal but opposite to the charge on the proton.
It has a very small mass, about 1/1840 of the mass of the proton.
The Properties Of Each Particle In An Atom
The properties of these particles are summarized in Table 5.1: Properties of sub-atomic particles.
A single atom is electrically neutral. This means it has no electrical charge.
This means that in any atom there must be equal numbers of protons and electrons. In this way, the total positive charge on the protons is balanced by the total negative charge on the electrons orbiting the nucleus. So, the charges cancel.
Electronic Arrangements
Electronic arrangement is the way electrons are arranged in an atom.
An atom has a central nucleus. The nucleus contains protons and neutrons. A cluster of electrons revolves in orbits around the nucleus. These electrons are grouped in shells.
Maximum Number Of Electrons In The Shells
Bohr (1913) put forward a theory of electron positioning. It is still generally accepted and used for chemical purposes.
Bohr's Theory on the arrangement of electrons in an atom can be summarized as follows
- Electrons are in orbit around the nucleus of the atom.
- The electron orbits are grouped together in shells. A shell is a group of orbits occupied by electrons with approximately equal energy.
- Electrons in shells far from the nucleus have higher energy than those in shells close to the nucleus.
- Electrons fill the shells starting with the first shell, which is closest to the nucleus.
- Shells are numbered 1, 2, 3, 4, etc. outwards from the nucleus. The shells may be represented by the letters K, L, M and N respectively, starting from the nucleus.
- The maximum possible number of electrons in a shell numbered n is 2n².
- The first shell can contain up to 2 electrons. The second shell can contain a maximum of 8 electrons. The third shell can contain up to 18 electrons.
- In the outermost shell of any atom, the maximum number of electrons possible is 8.
- The outer electrons of some atoms can be removed fairly easily to form ions.
- Chemical bonding between atoms to form molecules involves the electrons in the outer shell only.
The electronic arrangement of some typical atoms is shown in figure 5.2.
Electronic Configuration
The arrangement of electrons around the nucleus is also called electronic configuration. It depends on the maximum number of electrons that each shell can hold.
Example
An atom with 13 electrons has the electronic configuration 2:8:3. This means there are 2 electrons in the first shell, 8 electrons in the second shell and 3 electrons in the third shell.
The number and arrangement of electrons in the atoms of the first 20 elements are shown in table 5.2.
Table 5.2: The electron arrangements of the first 20 elements
After the first 20 elements, the organization of electrons becomes more and more complicated. The third shell (n = 3) can hold a maximum of 18 electrons.
At this stage, you will not be asked to work out electron arrangements beyond element 20 (calcium). But you should be able to understand electronic structures with more electrons. For example, bromine has the arrangement 2:8:18:7.
Energy Shell Diagrams
Atomic Number, Mass Number And Isotope
Relationship between Atomic Number and Number of Protons
All atoms of one element have the same number of protons. This number is called the atomic number (or proton number) of that element. It is given by the symbol Z.
No two elements can have the same atomic number. Sodium atoms have 11 protons. This makes them different from all other atoms. Only sodium atoms have 11 protons. Any atom with 11 protons must be a sodium atom.
In the same way, an atom with 6 protons must be a carbon atom. Any atom with 7 protons must be a nitrogen atom. So, you identify an atom by the number of protons in it.
There are 109 elements altogether. Hydrogen has the smallest atoms, with only 1 proton each. Helium atoms have 2 protons each. Lithium atoms have 3 protons each, and so on, up to meitnerium atoms, which have 109 protons each.
Table 5.3 shows the first 20 elements arranged according to the number of protons they have.
Every atom has an equal number of protons and electrons. So the atomic number also tells us the number of electrons in that atom.
In any given atom of an element, the number of neutrons has no effect on the identity and properties of that element. The number of protons and electrons determines the identity and properties of an element.
The number of neutrons only affects the mass, since each neutron has the same mass as a proton.
Mass Number of an Atom from Numbers of Protons and Neutrons
Protons alone do not make up all the mass of an atom. The neutrons in the nucleus also add to the total mass. The mass of the electrons is so small that it can be ignored.
A proton and a neutron have the same mass. So the mass of an atom depends on the total number of protons and neutrons present. This total is called the mass number (or nucleon number). It is given by the symbol A.
The mass number of an atom is found by adding together the number of protons and neutrons.
Table 5.3 shows the mass number of the first 20 elements, arranged in order of increasing atomic mass (mass number).
If the mass number and atomic number of an atom are known, its sub-atomic composition can be worked out.
Mass number = number of protons + number of neutrons in an atom.
Example
A sodium atom has 11 protons and 12 neutrons. So the mass number of sodium is 23.
The atomic number is the number of protons only. So
Mass number – atomic number = number of neutrons.
For a sodium atom, the number of neutrons = 23 – 11 = 12.
The number of protons is always equal to the number of electrons. So the number of electrons in a sodium atom is simply 11.
The same rule can be used to work out the sub-atomic composition of any element.
These two relationships are useful
- Number of electrons = number of protons = atomic number
- Number of neutrons = mass number (A) – atomic number (Z)
The Concept Of Isotope
Atoms of the same element may have different numbers of neutrons.
Normally, atoms of the same element have the same number of neutrons. However, there are many cases where two atoms of the same element have the same number of protons but different numbers of neutrons.
These atoms have equal numbers of protons, so they must also have equal numbers of electrons. But the different numbers of neutrons give them different mass numbers.
An element that shows this property is said to show isotopy. The different varieties of the atom are called isotopes of the element.
Isotopy can be defined as the tendency of atoms of one element to have the same atomic number but different mass numbers (atomic masses).
Isotopes can be defined in two ways
- Atoms of the same element with the same number of protons but different numbers of neutrons.
- Atoms of the same element with the same atomic number but different atomic masses.
Properties of isotopes
The isotopes of an element have the same chemical properties because they contain the same number of electrons. The number of electrons in an atom decides how it forms bonds and reacts with other atoms.
However, some physical properties of isotopes are different. The masses of the atoms differ, so other properties such as density and rate of diffusion also vary.
Radioisotopes
Many isotopes (like tritium) are unstable. The extra neutrons in their nuclei make them unstable. The nuclei break up spontaneously, that is, without any extra energy being supplied. They emit certain types of radiation. These isotopes are known as radioisotopes.
Notation For Isotopes
A simple system is used to tell apart different isotopes of the same element when writing symbols and formulae.
The isotope of an element, say X, has the symbol X with A and Z, where A is the mass number of the isotope and Z is the atomic number of any atom of X.
For all isotopes of one element, Z is constant. A varies because the different isotopes have different numbers of neutrons.
Examples
- The three isotopes of carbon are written 12C6, 13C6 and 14C6.
- Chlorine has two isotopes: 35Cl17 and 37Cl17.
A is the total number of neutrons and protons in the nucleus (the mass number or atomic mass). Z is the number of protons (the atomic number). So the number of neutrons in the nucleus of a given isotope is:
Number of neutrons in the nucleus = A – Z
Relative Atomic Masses
Most elements exist naturally as isotopes. So the value we use for the atomic mass of an element is an average mass.
This average takes into account the proportions (abundance) of all the naturally occurring isotopes. If an isotope is present in high proportion, it makes a large contribution to the average.
This average value for the masses of atoms of an element is known as the relative atomic mass (Ar).
Example
A sample of chlorine gas contains 75% of the isotope 35Cl17 and 25% of the other isotope 37Cl17. What is the relative atomic mass of chlorine?
Solution
To work out this problem, multiply the mass number of each isotope by its abundance. Then add up the products.
Therefore, the relative atomic mass of chlorine is 35.5 (that is, Ar = 35.5).
