Chemistry · Kidato 2

Topic 1: oxygen

Dakika 5 za kusoma ·

Yaliyomo

Oxygen

Occurrence Of Oxygen

Oxygen exists in air to an extent of 21% by volume (or 23% by weight).

It is the most abundant element on earth. It makes up ½ of the total mass of the earth's crust.

Oxygen is mainly found in combined states. It is found as oxides, hydroxides, silicates, sulphates, carbonates, water, etc.

Oxygen combines easily with other elements to form compounds. This shows that oxygen is a very reactive element.

Preparation And Properties Of Oxygen

Oxygen can be prepared in the laboratory from either hydrogen peroxide solution or potassium chlorate salt.

Laboratory preparation of oxygen from hydrogen peroxide solution

The most common method of preparing oxygen in the laboratory is the decomposition of hydrogen peroxide solution. The decomposition is catalyzed with manganese (IV) oxide.

At room temperature, hydrogen peroxide decomposes (breaks down) very slowly. It decomposes to water and oxygen.

To speed up the decomposition, black manganese (IV) oxide is added as a catalyst. This lets us collect a substantial amount of oxygen gas within a short time.

A catalyst is a substance that is present in small quantities and alters the rate of a chemical reaction. It remains chemically unchanged at the end of the reaction.

Preparation method

  1. Add hydrogen peroxide (20 vol.) drop by drop to manganese (IV) oxide. The manganese (IV) oxide catalyses the decomposition of the peroxide.
  2. Collect the oxygen over water, as shown in the figure below.

The gas is collected by downward displacement of water because it is only slightly soluble in water.

Figure: Apparatus for laboratory preparation of oxygen from hydrogen peroxide solution.

Laboratory preparation of oxygen from potassium chlorate

Oxygen can also be prepared by thermal decomposition of potassium chlorate. When this compound is heated, it decomposes slowly into potassium chloride and oxygen.

Preparation method

  1. Grind a mixture of potassium chlorate and manganese (IV) oxide at a ratio of 4:1.
  2. Place the mixture in a hard glass tube and fit it up as shown in the figure below.
  3. Heat the mixture. Oxygen gas is readily given off.
  4. Collect the gas over water.

Oxygen has almost the same density as air, so it cannot be collected by upward displacement of air.

It can be collected by downward displacement of water, as shown in the figure, because it is only slightly soluble in water.

Figure: Apparatus for laboratory preparation of oxygen from potassium chlorate.

Test For Oxygen

Oxygen rekindles a glowing splint of wood. No other gas behaves like this, except dinitrogen oxide, NO2.

Oxygen can be distinguished from dinitrogen oxide by these properties

  1. Oxygen has no smell, but dinitrogen oxide has a sweet, sickly smell.
  2. When oxygen is heated with nitrogen monoxide, it produces brown fumes of nitrogen dioxide. Dinitrogen oxide has no effect on nitrogen monoxide.

Experiments To Demonstrate Properties Of Oxygen Gas

Action of oxygen on metals

The way oxygen reacts with specific metals is summarized below.

Sodium

When burnt in excess oxygen, sodium burns with an intense yellow flame. It gives sodium peroxide.

The product is a yellow solid. It dissolves in water to give an alkaline solution.

Calcium

The metal burns in air with a red flame. It gives a white solid, calcium oxide.

Magnesium

Magnesium burns with a brilliant white flame. It leaves a white ash of magnesium oxide.

Iron

Iron burns in air with a shower of sparks. It leaves a brown-black solid of triiron tetroxide.

Copper

Copper burns in a stream of oxygen. It gives a black solid of copper (II) oxide.

In general, metals react with oxygen to form basic oxides.

Action of oxygen on non-metals

Carbon

Red-hot carbon combines vigorously with oxygen to form carbon dioxide. It leaves no residue.

Sulphur

Sulphur burns with a blue flame. It gives misty white fumes of sulphur dioxide.

Phosphorus

Phosphorus bursts into flame in air or oxygen without being heated. That is why it is stored under water. A white solid, phosphorus pentoxide, is formed.

Properties Of Oxygen

Physical properties

  • It is a clear, colourless gas with no smell.
  • It is a neutral gas. It is neither basic nor acidic in character.
  • It is slightly soluble in water. 100 cm3 of water at room temperature dissolves about 4 cm3 of oxygen.
  • It has almost the same density as water, although it is slightly denser than air.
  • It boils at -183ºC and freezes at -218ºC.

Chemical properties

  • Oxygen supports combustion.
  • It is a very strong oxidizing agent.
  • Oxygen is very reactive. It reacts vigorously with a great many metals and non-metals. With metals it forms basic oxides. With non-metals it forms acidic oxides.

Metal + Oxygen gives metallic oxide. Most of these are basic in character.

Non-metal + Oxygen gives non-metallic oxide. Most of these are acidic in character.

Uses Of Oxygen

Uses of oxygen in daily life include

  • The oxygen in the air, and that dissolved in water and soil, is used by all respiring organisms. Also, all types of burning need oxygen.
  • It is used in the oxyacetylene (oxygen–ethyne) flame for welding and cutting steel.
  • It is extensively used for removing impurities from pig iron in order to produce steel. Oxygen is blown into molten iron to remove impurities such as carbon or phosphorus. These are expelled in the form of gases, that is, their oxides.
  • It is used as an aid to breathing in hospitals, in high altitude climbing or flying, and in deep sea diving.
  • Liquid oxygen is used in the burning of fuels such as kerosene, hydrogen and hydrazine in various types of rockets.
  • It is used in the L-D process for making steel.

Relationship Between Some Uses Of Oxygen And Its Properties

There is a relationship between the uses of oxygen and its properties.

Oxygen is used as an aid to breathing in hospitals and at extreme altitudes because it supports life. It is used for combustion because it supports burning.

Likewise, oxygen is highly reactive. Because of this, it is used for removal of impurities, for welding, in the L-D process for making steel, and in burning of fuels in rockets.

Jaribu quiz ya ChemistryMaswali 43