Sustainable use of power energy and resources
Dakika 27 za kusoma ·
Yaliyomo
Energy And Power
Energy
Energy is the capacity for doing work. It is also the power required to carry out an activity.
Power
Power is the rate of doing work. It is also the rate of using energy.
You must have energy to accomplish work. Therefore, you need energy to produce power. Without energy, no power can be produced.
The Major Sources Of Power And Energy
Energy sources can be divided into two broad categories. These are renewable and non-renewable energy sources.
Renewable sources
Renewable sources are those that do not get finished or used up, because they are naturally replenished. They include:
- sunlight
- water
- geothermal steam
- wind
- biomass
Non-renewable sources
Non-renewable sources are those that can get finished or used up through use. They cannot be replaced once they are used up. They include:
- coal
- petroleum
- natural gas
- groundwater aquifers
- nuclear energy sources such as uranium and plutonium
The Origin Of Different Types Of Energy And Power Sources
Some of these energy and power sources are discussed in detail below.
Coal
Coal is a fossil fuel. It forms when dead plant matter is converted into peat. The peat is converted into lignite, then sub-bituminous coal, then bituminous coal, and lastly anthracite.
This involves biological and geological processes that take place over a long period of time. Coal is black or brown in colour.
Sunlight
The sun is the source of sunlight and of all forms of energy on earth.
Sunlight can be harnessed to generate electricity (solar power). This is done by using solar panels. The panels absorb solar energy, convert it into electrical energy and store it for later or immediate use.
Waves and tides
Waves are generated by wind passing over the surface of the sea, ocean or lake. As long as the waves move slower than the wind speed (just above the waves), energy is transferred from the wind to the waves.
Wind
Wind is air in motion from a low to a high pressure region.
Wind has energy. Appropriate devices can convert it into mechanical energy. This mechanical energy can be used to generate electricity or do any useful work.
Water
Water in motion, such as a waterfall or cataract, can be harnessed to generate hydroelectricity.
First, the kinetic energy in running water is converted into mechanical power. Then it is converted into electrical power.
Biomass
The term "biomass" refers to organic matter that has stored energy through photosynthesis.
This energy can be passed through the food chain to the bodies of animals and to their wastes. All of these can be converted into energy for everyday human use through processes such as combustion.
Petroleum (crude oil)
Petroleum is a fossil fuel formed from the fossilised remains of plants and animals.
When refined, it produces various petroleum fractions. These are used in different ways to generate energy. Petroleum can be used to power cars and many machines. It can be burned to produce heat and light, or to generate electricity.
Natural gas
Natural gas occurs alongside petroleum. The gas can be burned to generate light and/or heat. It can also be harnessed to generate electricity.
For example, natural gas from Songo Songo Island in Kilwa is expected to be piped to Dar es Salaam. There it will be used to generate electricity. It will also be supplied to homes as liquefied gas for heating and lighting.
Uranium
Uranium is a radioactive element. It produces tremendous amounts of energy when the nuclei of its atoms disintegrate (fission) or combine (fusion).
This energy is called nuclear energy. Many countries in the world use it to generate electricity.
Methods Of Acquiring/Extracting Power And Energy
The following are different energy and power resources, and the methods used to extract energy and power from them.
Coal
Coal is a combustive, black or brownish-black sedimentary rock. It usually occurs in rock strata, in layers or veins called beds or coal seams.
Coal is considered a non-renewable resource because it cannot be replenished within a human timeframe.
The activities involved in generating electricity from coal are
- mining
- transport to power plants
- burning the coal in power plants
At the power plant, coal is commonly burned in a boiler to produce steam. The steam is run through a turbine to generate electricity.
Petroleum
Petroleum is a naturally occurring liquid found in rock deep in the ground. It is a complex mixture of hydrocarbons of various molecular weights, plus other organic compounds.
The energy from petroleum products is tapped mainly by burning. Burning produces heat energy. This heat is used for heating, lighting or doing mechanical work, such as powering machinery and vehicles.
Fuel is burned in a furnace or boiler to generate heat. The heat is used in an engine to generate power. Petroleum products can also be burned to generate electricity.
Natural gas
Natural gas is a fossil fuel. It forms when layers of buried plants, gases and animals are exposed to intense heat and pressure over thousands of years.
Natural gas is mined from deposits deep underground and brought to the surface. Before it can be used as a fuel, it must be processed to remove impurities, including water. This is done to meet the standard of a marketable natural gas.
Energy is extracted from natural gas by burning it. Burning produces heat energy. This heat is used for heating, cooking and electricity generation.
The gas is also used as fuel for vehicles. It is used as a raw material in the manufacture of plastics and other commercially important organic chemicals.
Water
The potential energy of dammed or flowing water can be converted into storable electrical energy.
Harnessing flowing water to power machines and mechanical processes is one of the oldest methods of power generation. It is still used today.
The energy in water may be tapped naturally or artificially.
Naturally, flowing water at waterfalls runs through turbines, which generate electricity. River water may also be used to run milling machines.
Artificially, water may be lifted to higher points such as tanks or dams. There it drops in mass and turns the turbines to generate electricity.
Biomass, Uranium, Solar, Geothermal And Wind Energy
Biomass
Biomass is biological material taken from living things or from recently living organisms. It mostly refers to plants or plant-based materials.
As an energy source, biomass can be used directly by burning it (combustion) to produce heat. It can also be used indirectly, after it is converted into various forms of biofuel.
The biofuel can then be burned to release heat energy. This heat is used to power machines or for heating purposes.
Wood is burned directly to produce heat and/or light. Wood remains the best biomass energy source to date.
Examples of wood include
- forest residues (such as branches, dead trees and stumps)
- yard clippings
- wood chips
- municipal solid wastes
Biomass also includes plant or animal matter that can be converted into fibres or other industrial chemicals, including biofuels.
For example, gasohol is a biofuel made from a mixture of alcohol (from sugar cane) and petrol. It is used as a fuel to run cars and machines.
Rotten garbage, agricultural waste and human waste can release biogas under controlled conditions. Biogas can be used for heating, cooking and lighting.
Uranium
Uranium is a radioactive element. Its energy is extracted through nuclear fission or nuclear fusion.
Nuclear fission is the splitting of an atom. Nuclear fusion is the combining of two light atoms.
The most commercially exploited process is nuclear fission. In it, the atoms and nuclei of this radioactive element split in nuclear reactors.
The process releases a large amount of energy in the form of heat.
The heat is used to boil water into steam. The steam then turns turbines to generate electricity.
Solar energy
Solar energy is energy from the sun. This energy can be tapped and used for different purposes.
Solar energy is tapped by devices called solar panels. The panels absorb the energy and convert it into electrical energy. This electrical energy can be used immediately or stored for later use.
The trapped energy can be used to light homes and power gadgets such as phones and calculators.
The heat from the sun can also be tapped directly. For example, it is used to dry crops or clothes.
Geothermal steam
Geothermal power is extracted by directing geothermal steam to run machines that produce electricity.
Its heat can also be tapped by placing the material to be heated over the hot steam.
Wind energy
The kinetic energy of wind is harnessed by turning windmills, which generate electricity.
Each of the several windmills has a cable. This cable supplies electricity to the main cable, which then directs electricity to homes, industries and so on.
The electricity generated can be used for cooking, lighting and running machines.
Wind energy may also be tapped by putting up sails to propel water vessels such as dhows.
The Use And Importance Of These Types Of Power Resources
Power and energy resources are important in two ways
- First, through the energy and power they produce.
- Second, because of their own economic value.
Uses and importance
- Industrial development: power and energy resources are used in industrial development activities.
- Agriculture: power and energy resources, such as petroleum, run agricultural machinery such as tractors and harvesters.
- Petroleum used by machines in agriculture increases agricultural production.
- Environmental conservation: the use of solar, wind and biogas energy helps to conserve the environment.
- Transport: the transport sector improves because of the use of motor vehicles, ships, aircraft and so on. All of these are powered by petroleum products.
- Mining: most kinds of machinery used in mineral prospection, extraction and processing use power and energy generated from fossil fuel. Therefore, fuel energy helps in the development of the mining industry.
- Social services and amenities: most social services and amenities are facilitated by energy and power. For example, sports, games, schools, healthcare and homes depend on power and energy in different ways.
Direct economic and social importance
Energy and power sources have the following direct economic and social importance
- Source of employment
- Source of foreign exchange
- Source of government revenue
- Improvement of transport and communication infrastructure
- Promotion of trade and other industries
The Problems Facing The Process Of Power And Energy Harnessing
Power and energy production faces a number of problems. They include the following
- Changing climatic conditions:
Drought leads to rainfall scarcity. This causes a drop in the volume of water in rivers.
This problem affects the production of hydroelectric power. It is one of the factors leading to low energy production in most parts of the world, especially in the least developed countries.
- Lack of capital:
Energy and power production needs heavy investments in infrastructure, manpower and technology.
All these investments require a great deal of capital.
- Lack of diverse energy sources in respective countries:
Most countries have very few energy resources from which to extract power and energy.
Worse still, some countries do not have a single energy resource. They have to import the resources or the power.
For instance, uranium and geothermal steam are not found in many countries. Such countries extract power from only a few available resources such as water, wind or solar energy.
- Poor technology and lack of skilled personnel:
Many developing countries lack the technology required to establish energy extraction infrastructures. They also lack the skilled personnel needed to do this work.
Most of the power and energy exploitation technology used in developing countries is very old. It is less efficient and less productive.
There are also very few people with the necessary skills. These skills are for setting up and operating equipment, and for conducting research on power and energy production methods, facilities and technologies.
- High prices:
High prices for energy resources hinder energy and power output in most countries that have to import these resources from other countries.
Oil is used for energy production. We have recently seen escalating oil prices worldwide. This leads to low purchase of oil, and hence low energy and power production.
The equipment needed for production of energy and power is also very expensive. Many poor countries cannot afford it.
As a result, they resort to inefficient, less productive and obsolete technology. This technology cannot produce enough power and energy to meet the ever-increasing demand.
- Environment pollution:
Energy and power exploitation is sometimes accompanied by the emission of harmful gases that pollute the environment.
Coal burning, for example, releases tremendous quantities of carbon dioxide gas into the atmosphere.
As such, many countries are either phasing out such energy generation technologies, or spending a lot of capital to clean the coal so as to prevent environmental pollution.
The power and energy production sector is therefore under great pressure to adopt technologies that minimize or cause no environmental pollution.
- Siltation:
Silt accumulates in dams used for generation of hydroelectric power. This reduces the volume of water in the dams, and results in low power generation.
On the other hand, removing the silt from dams adds to the cost of energy and power production. These costs are pushed on to consumers of energy and power.
- Scramble for resources:
River water is also used for irrigation of crops, domestic and industrial uses, fishing, and preservation of flora and fauna.
For example, the river Nile is used for irrigation in Ethiopia (Gezira Irrigation Scheme). At the same time, it is required for production of hydroelectric power at the Aswan High Dam in Egypt.
If too much water is used for irrigation, little will be available for hydropower generation. This competition for the same resource can lead to international conflicts and even wars.
Another example is coal. It is used for domestic heating as well as for generation of electricity. If too much of it is used for domestic heating, the generation of power and energy from coal can be curtailed.
In Tanzania, peculiar species of toads are found at Kihansi power generation station on the Kihansi River. Use of water for generation of hydroelectricity affects the lives of these organisms.
This has caused big concern among environmentalists and wildlife conservation groups.
Ways Of Addressing Power And Energy Harnessing
- Dredge silt regularly:
The silt accumulating in dams should be dredged regularly in order to keep the volume of water constant.
This will maintain the capacity of energy and power generation.
- Avoid pollution and tree cutting:
Any form of environmental pollution likely to cause global warming and reduction in the amount of rainfall should be avoided.
People should not cut down trees indiscriminately. This can lead to drought, and hence a reduction in the volumes of rivers needed for generation of hydroelectricity.
- Diversify energy sources:
Countries should diversify their energy generation sources. This helps them escape the effects of problems such as escalating oil prices and climate change.
- Adopt new technologies:
Developing countries should phase out the old energy and power generation technologies. They should adopt new ones so as to cope with technological advancements.
This ensures that their energy generation is efficient and highly productive.
- Carry out research:
Research should be carried out often in order to improve energy and power production, and to come up with new production methods.
Research will also help in finding power and energy production methods that cause less or no environmental pollution.
- Train people:
Governments should train their people in courses related to energy and power generation. This should be done at schools, colleges and universities.
The aim is to make them professionally competent in the field of energy and power generation.
- Set aside funds:
Countries should set aside enough funds for energy and power generation. Success in this sector can boost the growth and development of other sectors.
Dormancy in the energy and power sector can hinder industrial development and cause the country's economy to drop.
The Importance Of Power And Energy Resources In The Focal Countries
The USA is a technologically advanced country with a huge and very stable economy. It is a developed and heavily industrialized country.
The USA has a great demand for power and energy. Its industries and its large population need them. These and other factors have contributed to the development of various power production resources.
Solar and wind are among the diverse power resources in the USA.
Solar Power
The U.S. is among the top countries in the world in electricity generated by the sun. Several of the world's largest small-scale installations are located in the desert Southwest.
Solar power includes small-scale solar power plants. It also includes local distributed generation, mostly from rooftop solar panels.
The United States conducted much early research in solar devices and concentrated solar power. There are plans to build many other large solar plants in the United States.
Many states have set individual renewable energy goals. Solar power is included in these goals in various proportions.
Solar power accounts for about 1% of the total national generation capacity. It is mainly exploited in the sunny areas of the country, which include the states of Nevada and California.
(Picture: Rooftop solar panels)
Wind Power
Wind power is a branch of the energy industry that has expanded quickly over the last several years.
(Graph: U.S. Wind Generation (KW) by Year)
Wind power accounts for 4% of the total energy produced in the USA. Texas is firmly established as the leader in wind power development. It is followed by Iowa and California.
Wind power is used for these purposes
- To run farms
- To run industries
- To generate electricity that is fed to the national grid
The Importance Of Solar And Wind Power In The Usa
- Source of employment:
The solar and wind energy industry is more labour-intensive. It supports thousands of people in the USA.
The wind energy industry employs many Americans in a variety of capacities
- Manufacturing
- Project development
- Construction and wind mill installation
- Operations and maintenance
- Transportation and logistics
- Financial, legal and consulting services
The solar energy industry employs people in jobs including solar panel installation, manufacturing and sales.
- Industrial development:
Energy and power generated from resources such as coal, uranium, petroleum and water are very expensive compared to wind and solar energy.
Wind and sunlight are abundant and available. This cheap energy promotes industrial development.
- Agricultural development:
Wind and solar power is commonly used in large farms. It supplies electricity for activities such as pumping water, lighting and heating.
This has, in turn, promoted large-scale agriculture in the country.
- Conservation of non-renewable energy resources:
Renewable energy sources include wind, solar and hydroelectricity. Depending on them for power and energy generation helps to conserve non-renewable energy sources such as gas, coal and petroleum.
This ensures that these non-renewable resources do not run out or become exhausted soon. They are conserved for future uses instead.
- Reduced environmental pollution:
Exploiting non-renewable energy resources, such as petroleum, coal and wood, releases harmful gases to the atmosphere. This pollutes the environment.
Harnessing and using wind and solar energy do not pollute the environment.
Thus, generating sufficient power and energy from these resources will help reduce environmental pollution. Such pollution could otherwise result from dependence on non-renewable resources.
- Improved standard of living:
People employed directly and indirectly in the wind and solar energy industry earn cash. They spend it on their daily needs as well as other amenities.
Solar and wind energy is cheap, so it is affordable to many Americans. People who had no access to the costly hydroelectricity and thermal electricity can now use this cheap power and energy.
This has helped improve their living standards.
- Development of other sectors of the economy:
Growth in the power and solar industry creates positive multiplier effects.
For example, industries in the renewable energy supply chain will benefit. These include industries manufacturing windmills and solar panels.
The growth of industries that make wind and solar energy equipment depends on the growth and existence of the solar and wind generation industry.
Local businesses will also benefit from increased household and business incomes.
- Generation of revenue:
Local governments collect property and income taxes and other payments from energy project owners. These revenues can help support public services. This is especially so in rural communities, where projects are often located.
Owners of the land on which wind projects are built receive lease payments. They also receive payments for the rights to transmit electricity through their land.
They may also earn royalties based on the projects' annual revenues.
- Stabilisation of energy prices in future:
Wind and solar energy is providing affordable electricity across the country right now. It can also help stabilize energy prices in future.
The costs of solar and wind energy technologies have declined steadily. They are projected to drop even more.
For example, the average price of a solar panel has dropped significantly. The cost of generating electricity from wind is also declining gradually.
Wind and solar energy projects require initial investments to build. Once established, they operate at very low costs. For most of these technologies the fuel is free.
As a result, renewable energy prices are relatively stable over time.
- Diversification of energy supplies:
Using more wind and solar energy can lower the prices and demand for natural gas and coal. It does this by increasing competition and diversification of energy supplies.
Generating energy from different resources ensures that the supply is not interrupted if one resource is finished or exhausted. This ensures constant availability of power and energy.
Therefore, wind and solar energy helps to diversify the energy supply in the country.
- Reliability and flexibility:
Wind and solar energy supplies are less prone to large-scale failure. This is because they are distributed and modular.
Distributed systems are spread out over a large geographical area. A severe weather event in one location will not cut off power to an entire region.
Modular systems are composed of numerous wind mills or solar panels. Even if one piece of equipment is damaged, the rest can typically continue to operate.
- Sustainability:
For as long as the sun shines and the wind blows, the energy produced can be harnessed. It can be used to send power across the grid.
The Problems Facing Power And Energy Harnessing In Focal Countries
Problems Facing Solar And Wind Power In The Usa
- Generation of wind and solar power depends on the prevailing weather conditions.
If there is little or no sunshine because of prolonged cloud cover, very little solar power is generated. The same happens if the wind speed is very low.
This means only a small amount of electricity is produced. It cannot meet the demand of all consumers.
- People are still reluctant to change from the traditional energy sources, such as hydroelectricity.
They are slow to adopt solar and wind power. This hinders fast development and growth of the industry.
- The cost of installing equipment for generating wind and solar power on a large scale is very high.
This has led to limited investment in the industry.
- The cost of leasing land for building wind energy projects is very high.
This has made many companies reluctant to establish wind power projects.
- The industry faces stiff competition from other sectors of energy and power.
Examples are coal power, hydroelectric power and geothermal power.
- Government subsidies and taxes are unequal.
Nuclear and fossil fuel technologies have a considerable advantage in government subsidies for research and development. Wind and solar energy do not get any government subsidies.
In addition to receiving subsidies, conventional generation technologies have a lower tax burden.
- Wind and solar power developers may have difficulty obtaining financing at rates as low as those available for conventional energy facilities.
- Good wind sites are often in remote areas, far from the cities where electricity is needed most.
Transmission lines must be built to bring the electricity from the wind farm to the city.
This increases the cost of generating and providing electricity.
- Wind resource development may not be the most profitable use of the land.
Land suitable for installing wind mills must compete with alternative uses of land. These uses may be more highly valued than electricity generation.
Hep And Biogas In Tanzania
Hydroelectric power (HEP)
Hydroelectric power contributes about 57% of the total power generated in Tanzania.
The electricity supply industry is dominated by the Tanzania Electric Supply Company (TANESCO).
TANESCO operates hydropower generation stations. These include Kidatu, Kihansi, Mtera, Pangani, Hale, Nyumba ya Mungu and Uwemba. Together they total 561 MW of electricity.
TANESCO also generates thermal electricity using gas and diesel. The plants are located in various parts of the country.
There are also independent power plants (IPPs). They produce thermal electricity from gas and diesel. They sell the power to TANESCO, which feeds it to the national grid.
Biogas
Demand for power is increasing and energy resources are dwindling. Because of this, Tanzania needs to develop alternative energy sources.
One such source is biogas. It is used for heating, lighting and cooking at homes, schools, hospitals and other places.
Biogas is produced by anaerobic digestion with anaerobic bacteria, or by fermentation of biodegradable materials. These materials include manure, sewage, municipal waste, plant material and crops.
Biogas technology was introduced in Tanzania in 1975.
It was not until the late 2000s that a study was conducted on the biogas sector and how to improve it. After that, the sector made better progress in domestic biogas uptake.
The government is collaborating with different development partners. They work to improve existing technologies and to construct new biogas plants, particularly for rural communities.
It is estimated that about 700 biogas plants have been constructed in Tanzania.
Most of these plants are in rural areas. Raw materials such as livestock and poultry wastes and crop residues are easily and abundantly available there.
Importance Of Hep And Biogas Production In Tanzania
Hydroelectricity and biogas are very important power resources in Tanzania.
Below are some of the importances of producing these resources
- The hydroelectricity and biogas industry employs people who carry out energy production activities.
The sector is therefore a source of employment opportunities for some Tanzanians.
This helps to improve their income and so their standard of living.
- The hydroelectricity generated in Tanzania is used to power other industries and sectors of the economy.
It therefore leads to industrial development and to development of other economic sectors in the country.
- Biogas generation in rural areas has greatly helped to improve the living standard of rural people.
Studies have shown that women and girls with access to biogas do not spend much time looking for firewood. They can instead direct their efforts to other economic activities that improve family income.
It saves women and children from the drudgery of collecting and carrying firewood. It also saves them from exposure to smoke in the kitchen, and from the time spent cooking and cleaning utensils.
- The use of biogas and hydroelectricity has greatly reduced the cutting down of trees for firewood.
This helps to prevent deforestation and so ensures environmental conservation.
Also, biogas combustion does not affect the environment through pollution. It produces negligibly little pollutants in the atmosphere compared to wood, coal and petroleum.
Using municipal waste to generate biogas directly helps to clean the environment. It also prevents the pollution that could result from dumping these wastes on land or into water bodies.
- Most of the biogas projects are undertaken by development partners from abroad.
This has helped to improve the relationship between Tanzania and the partners' home countries.
- The residue of organic matter left after biogas has been generated is used as enriched organic manure.
This manure can supplement, or even replace, chemical fertilizers.
Problems Facing Hep And Biogas Production In Tanzania
- Unreliable climatic conditions:
Hydroelectric power (HEP) generation relies on rain-fed rivers and dams.
Recently, there have been long dry spells. These lower the volume of water in rivers and dams. This reduces hydroelectricity generation.
The result is power rationing. This interrupts economic production.
- Lack of adequate capital:
Generating HEP and biogas requires investment in installing hydropower plants and biogas plants. Availability of capital limits this investment.
The country's economy is sluggish. Because of this, investment in the power and energy sector has not been successfully implemented.
There are not enough funds to establish more biogas plants in rural areas.
The country relies heavily on donors and foreign investors to finance these projects.
- Siltation:
Silt keeps accumulating in the dams. This reduces the volume of water. As a result, less hydroelectricity is generated.
Siltation also increases operation costs. This is because the silt has to be dredged periodically.
- Lack of skilled personnel:
Establishing and operating hydroelectric and biogas plants requires skilled personnel.
Very few local people have the expertise and professional skills to operate these projects. This has hindered the construction of hydroelectric and biogas plants in the country.
Because of this, the production of energy and power from these two sources is minimal.
- Reluctance by the people:
People are still reluctant to adopt biogas technology.
Many people depend on wood as their major source of fuel.
This has led to low investment in the industry. As a result, biogas production is low.
Solutions To Problems Facing Power Production
- Remove silt from dams frequently. This prevents a reduction in water volume and the resulting drop in production.
- The government should invest in other forms of energy generation, such as geothermal and coal power. This will reduce overdependence on hydroelectricity.
- Establish training institutions to train people in energy production technology. This will produce skilled manpower to manage the power sector.
- Liberalize power generation. This will attract investors with enough capital to invest in the industry.
- Conduct mass education so that people adopt the production and use of biogas. This can be done through seminars, trade shows, mass media and other means.
People who benefit from using biogas may be invited to carry the message to those who are reluctant to adopt the technology.
Solutions To Problems Facing Power And Energy Harnessing In Focal Countries
Solutions to problems facing solar and wind power in the USA
- Alternative sources of energy have been developed to supplement solar and wind power.
- People must be taught about the benefits of wind and solar power. This will persuade them to switch from traditional to modern energy sources.
- Government support and partnerships have enabled the setting up of power stations for wind and solar energy exploitation.
- The government must provide subsidies to solar and wind research and development, as it does for conventional technologies.
Lessons From Countries For Better Harnessing Of Power And Energy Resources In Tanzania
As far as energy production is concerned, Tanzania has a lot to learn from the USA. The following are some lessons that can be adopted and implemented:
- Liberalized energy sector:
In the USA, the energy sector is liberalized. Many private companies are allowed to generate and sell energy and power.
Tanzania should copy this example. It should allow more private investors to take part in energy and power generation. TANESCO should not be allowed to monopolize energy production.
- Diversified energy industry:
The USA has diversified its energy and power industry very well. It generates power from different sources, ranging from nuclear to biogas plants.
Tanzania can do the same. It can use the natural gas, coal and uranium discovered in various parts of the country. This will produce the highly demanded power to boost her economy.
- Agencies for solar and wind energy:
The government should form agencies to address the generation of solar and wind energy.
Tanzania has great potential for wind and solar energy. Suitable conditions exist for harnessing these power resources.
There is plenty of wind and sunlight in the country. This allows sustainable production of wind and solar energy. The energy can then be fed to the national grid to help solve the energy problem in the country.
- Government support for energy sources:
The government should support the development of various energy sources. It should provide funds to local companies.
It should also create favourable investment conditions for multi-million energy production companies to invest in the energy generation sector.
- Use of local experts:
The USA uses its own experts to develop the energy industry.
Tanzania should also train her own people. They can then take an active part in building energy generation projects. The country would not have to depend on skilled personnel from outside.
