Geography · Kidato 2

Sustainable use of forest resources exploitation of forest resources

Dakika 10 za kusoma ·

Yaliyomo

Sustainable Use Of Forest Resources: Exploitation Of Forest Resources

Meaning Of Forest

A forest is a large area of land mostly covered by trees of different sizes and species.

Another way to say it: a forest is a dense growth of trees, plants and undergrowth covering a large area of land.

Forests can be natural or man-made. A man-made (planted) forest is also called an artificial forest.

Importance Of Forests

  1. Forests prevent soil erosion. Trees and grasses stop the agents of erosion, such as water, wind and moving ice, from moving soil.
  1. Forests maintain water sources like rivers, catchment areas, springs and lakes. This is because forests support rain formation.
  1. Forests are used for scientific studies (research).
  1. Where there is a variety of trees, tourism can develop because of the scenic beauty. In this way the country can gain foreign money.
  1. Forests provide habitats for animals and birds of different varieties.
  1. Forests help to modify the climate, especially through rain formation and moisture conservation.
  1. Forests add oxygen to the environment. Oxygen is produced during photosynthesis. In this process, trees clean the air by absorbing carbon dioxide. Carbon dioxide is the raw material used during photosynthesis.
  1. Trees are a source of fuel energy. They are used for firewood and charcoal making.
  1. Forests provide raw materials for paper and pulp industries. These industries produce writing materials.
  1. Forests provide building materials like poles and timber.
  1. Some tree species are used for making medicine. Forests also provide fruits and ornamental flowers.
  1. Forests contribute to soil development. Rotting leaves form humus. Humus is very important in plant growth.

Types Of Forests

There are two broad types of forests: natural forests and planted (artificial) forests.

Natural forests develop naturally, without the intervention of man.

Planted forests are planted and cared for by man.

Distribution of forests by type

Because of factors such as climate and tree species, natural forests can be divided into the following broad categories.

  1. Tropical rainforests:

They are found around the equator, between 23.5°N and 23.5°S.

The trees are tall and often take a very long time to mature.

They consist of indigenous trees, which are typically broad-leaved.

They have thick undergrowth of shrubs and other vegetation.

  1. Temperate forests:

These forests occur in the mid latitudes of both hemispheres.

Temperate deciduous forests have four distinct seasons.

Precipitation falls throughout the year. It falls as rain in spring, summer and fall, and as snow in winter.

The forest floor supports mosses, ferns and wild flowers.

Maple, oak and birch are examples of the deciduous trees that dominate these forests.

There are also small numbers of evergreen trees such as pine and fir.

  1. Coniferous forests:

They are typically found in coastal areas with mild winters and heavy rainfall.

They are also found in inland mountainous areas with mild climates, where temperature changes little throughout the year.

Evergreen conifers dominate these forests.

They are characterized by evergreen, needle-leaved trees and little undergrowth. The trees are tall and take a very long time to mature.

Dominant tree species include cedar, cypress, Douglas fir, pine, spruce and redwood.

Some deciduous trees such as maple, and also mosses and ferns, are common in coniferous forests.

  1. Boreal (taiga) forests:

These are the northernmost forest type. They are found between 50°N and 60°N.

They are characterized by long winters and short summers.

Most precipitation falls as snow.

The trees are mostly evergreen. Species include spruce, fir and pine.

Factors For Distribution Of Forests

Forest distribution is affected by a number of factors. They include the following

  1. Soil:

Different types of soil offer different types of vegetation.

For example, damp and marshy soil favours the growth of trees such as mangroves. Mangroves are generally found on the coastal areas of the tropics or subtropics.

On the other hand, sandy soils in dry desert areas support prickly bushes and cactus. The aim of these plants is to conserve water.

  1. Rainfall:

Water is an essential component of all living organisms. Trees need water for physiological functions such as photosynthesis and cooling.

Hence, water is essential for the growth and development of any particular vegetation.

Forests thrive well in areas that receive sufficient rainfall, evenly distributed throughout the year.

  1. Temperature:

The warm and wet equatorial climate supports the growth of mainly huge, tall, deciduous trees.

The cooler temperate climate supports needle-leaved trees, which are adapted to that climate.

The moderately hot tropical climate supports a variety of softwood and hardwood trees. These trees thrive best in the tropics.

  1. Relief:

Relief refers to variation in altitude in an area. Differences in altitude along the slope of a mountain bring about differences in the type of forests along that slope.

For example, you will always find dense forests at the foot of Mount Kilimanjaro. As you move up from the foot, the vegetation type and density change gradually.

  • At a height between 1800 and 2800 m, there is the tropical rainforest.
  • This is followed by the temperate forest at around 4000 m.
  • Between 3000 and 3500 m, the forest is dominated by scanty vegetation, with patches of bamboo forest.
  1. Aspect:

In physical geography, aspect generally refers to the horizontal direction in which a mountain slope faces.

The slope facing the direction of the prevailing winds (the windward side) always receives more rainfall than the slope on the opposite side (the leeward side).

For this reason, dense forests grow on the windward side because of abundant rainfall. The leeward side has scanty and poor vegetation.

  1. Drainage:

If the soil has too much water, plants cannot get enough oxygen from the soil. This affects root respiration, and the plants may eventually die.

On the other hand, plants cannot grow well if they do not have healthy roots for absorbing water from the soil.

So, a proper balance of plant health, water and air is necessary for maximum plant growth and development.

Well drained soils support the growth of a variety of big trees, compared to water-logged and swampy lowlands.

However, a few plants such as mangroves can thrive on shallow sea shores that are more or less permanently covered by water.

  1. Human activities:

Human activities such as clearing vegetation to get land for agriculture or settlement greatly affect the distribution of forests.

Most of the natural forests of the world have been cleared by man.

In some parts, man has planted forests (artificial forests) on bare land or in place of natural forests.

Types Of Forest Resources

  1. Timber:

Timber is used for making furniture and for construction works. It is also used for match making and for pit props. It is used for making wood pulp, which is used to manufacture newsprint and crayons.

In Brazil, 30% of timber is used mainly for furniture, harbour piles, lock gates, boat building and tanning extracts. The other 70% is used for fuel.

  1. Resins and gum:

These are obtained from tree barks.

  1. Fibre materials:

These are used for different purposes, such as stuffing upholstery cushions.

  1. Oil from nuts:

This can be processed into vegetable oil.

  1. Fruits and flowers:

These are used for human and animal consumption.

  1. Medicinal plants:

These include the castor oil plant, sarsaparilla and cinchona. They are used for making genuine medicines.

Ways Of Obtaining Forest Resources

Forest resources can be obtained by a controlled or an uncontrolled method.

Uncontrolled method

Plant cover is removed over an extensive area. This leaves the land open and liable to erosion agents.

Examples are using fires, shifting cultivation and deforestation.

Controlled method

This is governed by government directions. These directions discourage the use of fire. They encourage sustainable development of forests for the benefit of the people and the creatures that live in such places.

It includes reforestation, that is, planting trees to replace harvested forest resources.

Problems Arising From Exploitation Of Forest Resources

Over-exploitation of forest resources can cause the following environmental problems

  1. Increase in soil erosion:

Raindrops fall harshly on the exposed soil and remove the fertile soil.

  1. Excessive evaporation:

This causes drought, which means problems of water because streams and springs dry up.

  1. Destruction of animal habitat.
  1. Accelerated desertification:

This is caused by prolonged drought in an area, since the absence of forests affects rain formation.

  1. Pollution of the atmosphere:

This can lead to the greenhouse effect and global warming. It happens when forests are cleared by burning, which adds carbon dioxide to the atmosphere.

  1. Disappearance of some species of trees (loss of biodiversity).
  1. Unreliable rainfall, due to the excessive evaporation.

Forest Conservation Measures

  1. Planting trees where other trees have been cut (reforestation), and planting trees where there never was any tree before (afforestation). Some areas should also be set aside and declared protected areas.
  1. Educating people on the importance of conserving the forest, and persuading them to participate fully in all activities involving forest conservation. There should also be clear policies giving directions on the proper use of forest resources.
  1. Using alternative energy resources instead of depending on trees. Examples are solar energy, geothermal power, bio-gas and HEP.
  1. Careful land use planning, in order to avoid destruction of trees. Population control should be encouraged in countries, so as to reduce pressure on forest resources and on land in general.
  1. Improving agricultural methods, so as to encourage proper land use. Methods like shifting cultivation should be discouraged.
  1. Destocking, which means reducing the number of animals, should be encouraged among pastoralists. Having too many animals leads to the destruction of vegetation.
  1. Introducing new and fast growing trees.

Agro-forestry

Agro-forestry means the practice of inter-cropping trees and crops in the same farm. Trees can be inter-cropped with crops like beans, bananas and others.

Advantages And Disadvantages Of Agro-Forestry

Advantages of inter-cropping trees with crops (agro-forestry)

  1. Trees prevent soil erosion. Crops like beans add nutrients to the soil.
  1. A farmer gets a variety of profits from the same farm. These are forest products and crop products.
  1. Family members get firewood from around the homestead. They do not travel very far in search of firewood.
  1. Trees provide shade to other plants on the farm land.
  1. Rotten trees add nutrients to the soil. This improves soil fertility.

Disadvantages related to agro-forestry

  1. When large trees are inter-cropped, the annual crops tend to suffer. This leads to a decline in production. It happens because the large trees take up most of the moisture and nutrients. They also block light from reaching the annual crops.
  1. Some trees are harmful to crops because they produce poisonous substances.
  1. Mechanization cannot be done easily because of the trees.

Areas With A Timber Industry

Examples of areas with a timber industry

  • Sweden
  • Canada
  • Some parts of Japan

In these areas, coniferous trees provide most of the forest resources.

60% of Canada is covered by forests. The major species are Oak, Chestnut, Spruce and Pines.

Factors which have led to the development of the timber industry (in Sweden, Canada and Japan):

  1. Low temperature discourages settlement. This leaves room for trees.
  1. Enough rainfall leads to the growth of coniferous forests.
  1. Availability of capital.
  1. Cheap means of transport.
  1. Sound forest management strategies.

Timber Industry In Gabon

Factors which have led to the development of the timber industry in Gabon

  1. Availability of many tree species.
  1. Availability of rivers like Ogowe. They make it easy to transport timber products.
  1. Large foreign companies were given a concession to exploit the forests. These companies have capital.
  1. A constant market for timber products.
Jaribu quiz ya GeographyMaswali 40