Transport of materials in living things
Dakika 27 za kusoma ·
Yaliyomo
Transport Of Materials In Living Things
Why living organisms need transport
Living organisms need food, oxygen, carbon dioxide and water. They use these materials to carry out life processes such as respiration, growth, reproduction and excretion.
These materials must be absorbed into the body of the organism. Then they must be transported to different parts of the body so that these life processes can take place.
Waste products are released from various metabolic processes. They must be expelled from the body as soon as they are formed. This stops them from accumulating and poisoning the body.
To transport all these materials, the body of an organism needs a transport system (transport mechanism).
Living organisms use three mechanisms of transport
- diffusion
- osmosis
- mass flow
Importance Of Transport Of Materials In Living Organisms
- Transport helps to distribute nutrients and food to different parts of the organism's body.
- Transport helps to remove waste products from the cells and the body of the organism. This prevents poisoning of the body.
Diffusion, Osmosis And Mass Flow
Diffusion
Diffusion is the process in which molecules move from a region of high concentration to a region of low concentration.
Gases and fluids can be transported or move by diffusion.
The difference in concentration of molecules between the region of high concentration and the region of low concentration is called the concentration gradient (or diffusion gradient).
When the concentration gradient is high, the diffusion rate is faster. When the concentration gradient is low, the diffusion rate is slower.
Molecules keep moving from the region of high concentration to the region of low concentration. This continues until the diffusion gradient becomes zero. At that point the concentration in both regions is equal.
Figure: Diffusion process
Osmosis
Osmosis is the process in which solvent molecules move from a region of high solvent concentration to a region of low solvent concentration through a semipermeable membrane.
So, osmosis is the movement of solvent molecules from a region of high solvent concentration (a more dilute solution) to a region of low solvent concentration (a more concentrated solution) through a semipermeable membrane.
The Effect Of Osmosis On Animal And Plant Cells
In an animal cell
An animal cell may be placed in a hypotonic solution (a solution with low concentration). The cell gains water by osmosis and swells.
The swelling makes the cell membrane weak because of high osmotic pressure. The cell then bursts. This process is called hemolysis.
The opposite happens when an animal cell is placed in a hypertonic solution (a solution with high concentration). The cell loses water by osmosis. It shrinks and becomes crenated.
Figure: An example of the effect of osmosis on a red blood cell.
In a plant cell
A plant cell may be placed in a hypotonic solution (a solution with low concentration). It gains water by osmosis.
It does not burst, because it has a strong, rigid cell wall made of cellulose. Instead, the vacuole enlarges and the osmotic pressure rises. This makes the cell become turgid.
When a plant cell is placed in a hypertonic solution, it loses water by osmosis. It shrinks and becomes flaccid. This process is known as plasmolysis.
Figure: An example of the effect of osmosis on a plant cell.
Mass flow
Osmosis and diffusion move materials slowly and over short distances.
Some materials must be moved over long distances. This is mostly in large organisms. Large organisms therefore need another transport mechanism that moves materials over long distances and in large quantities. This mechanism is mass flow.
Mass flow is the movement of bulk fluid materials from one point to another because of a pressure difference between those points.
In mass flow, materials do not pass through a membrane. They travel along vessels or tubes.
In animals, mass flow transports food, water, respiratory gases, blood, and lymph in the lymphatic system.
In plants, mass flow transports water and mineral salts from the roots to the stem. It also transports food from the leaves to other parts of the plant body. This is done through the vascular bundles (xylem and phloem).
Transport Of Materials In Mammals
Mammalian Circulatory System
The circulatory system in mammals is made up of the heart, the blood and the blood vessels.
- The heart is an organ that pumps blood.
- The blood is the fluid that transports materials.
- The blood vessels are tubes in which blood flows.
The structure of the mammalian heart
The mammalian heart is cone shaped. It is made of special muscles called cardiac muscles.
The heart is located in the chest cavity, between the lungs.
The main function of the heart is to pump blood to the whole body.
The blood vessels that take blood into and away from the heart are joined at the anterior end of the heart.
Structural features of the mammalian heart and their functions
The mammalian heart is divided into four chambers. The anterior part has the left and right auricles. The posterior part has the left and right ventricles.
The left auricle and left ventricle are separated by the bicuspid valve. The right auricle and right ventricle are separated by the tricuspid valve.
The bicuspid valve and the tricuspid valve prevent backward flow of blood.
Parts of the heart and their functions
- Right auricle: receives deoxygenated blood from the body through the vena cava.
- Left auricle: receives oxygenated blood from the lungs through the pulmonary vein.
- Right ventricle: receives deoxygenated blood from the right auricle. It pumps the blood to the lungs through the pulmonary artery.
- Left ventricle: receives oxygenated blood from the left auricle. It then pumps the blood to the whole body through the aorta. The walls of this chamber are thick so that they give high pressure for pumping blood to other parts of the body.
- Tricuspid valve: prevents backward flow of blood from the right ventricle to the right auricle.
- Bicuspid valve: prevents backward flow of blood from the left ventricle to the left auricle.
- Semilunar valve: prevents backward flow of blood from the pulmonary artery and the aorta to the ventricles.
- Vena cava: carries deoxygenated blood from the body to the heart.
- Pulmonary artery: carries deoxygenated blood from the heart to the lungs.
- Pulmonary vein: carries oxygenated blood from the lungs to the heart.
- Aorta: carries oxygenated blood from the heart to the rest of the body.
Functions And Adaptation Of Parts Of The Heart To Their Functions
The heart has four chambers. They hold the blood temporarily before pumping it to the lungs and other parts of the body.
The left ventricle has thick, muscular walls. These walls contract to pump and push blood over a long distance, that is, to the other parts of the body.
The heart is made up of cardiac muscles. These muscles contract and relax without getting tired.
The cardiac muscles are supplied with two vessels
- The coronary artery supplies oxygen to the heart muscles.
- The coronary vein collects and removes the blood containing carbon dioxide and metabolic wastes.
The heart has the bicuspid valve, the tricuspid valve and the semilunar valves. They open to allow blood to flow in one direction. They close to prevent blood from flowing backward.
The vena cava and the pulmonary vein transport blood to the heart auricle. The vena cava brings blood from the rest of the body. The pulmonary vein brings blood from the lungs.
The pulmonary artery transports blood away from the heart ventricle to the lungs.
The aorta transports blood away from the heart to the rest of the body.
The heart is enclosed by a tough, double-layered protective sac called the pericardium. It prevents overstretching of the heart when the heart pumps blood.
The heart has a thick wall called the septum. It prevents oxygenated blood on the left side from mixing with deoxygenated blood on the right side of the heart.
Structure And Function Of Blood Vessels
Blood vessels are tubes in which the blood flows.
There are three main blood vessels
- Arteries
- Veins
- Capillaries
Arteries
Arteries transport blood away from the heart. Therefore, they have thick, muscular walls which withstand high pressure.
The main artery is called the aorta. It divides into small branches called arterioles. The arterioles supply blood to the main organs.
The arterioles divide further into tiny, thin-walled tubes called capillaries. The capillaries supply blood to the cells.
Veins
Veins carry blood from parts of the body to the heart.
The main vein is called the vena cava.
Veins carry deoxygenated blood, except the pulmonary vein. The pulmonary vein carries oxygenated blood from the lungs to the heart.
The pressure of blood in veins is very low. Therefore, the walls of veins are thin. Veins also contain valves. The valves prevent blood from flowing backward, so the blood keeps moving towards the heart.
Capillaries
Capillaries transport blood to individual cells. They are highly branched to allow maximum exchange of materials between the blood and the cells.
They are very close to the tissues. They are thin to allow easy diffusion of materials.
Capillaries have a small lumen. This allows blood to flow at high pressure, so as to force materials out of them.
Comparison Between Arteries And Veins
Arteries
- Carry oxygenated blood, except the pulmonary artery.
- Have thick, muscular walls.
- Carry blood away from the heart.
- Have no valves.
- Have a smaller lumen.
- Blood flows under higher pressure.
- Lie deeper from the body surface.
Veins
- Carry deoxygenated blood, except the pulmonary veins.
- Have thin and less muscular walls.
- Carry blood towards the heart.
- Have valves.
- Have a wider lumen.
- Blood flows under low pressure.
- Are found next to the body surface.
The Blood
Blood is a specialized tissue. It contains cells and other particles suspended in a liquid called plasma.
The components of blood are
- Red blood cells
- White blood cells
- Platelets
- Plasma
Red blood cells
Red blood cells are red in colour. They are disc-shaped with a depression at the centre. They are formed in the bone marrow.
They are also called erythrocytes. They have no nucleus.
The red colour is due to haemoglobin. The main function of haemoglobin is to transport oxygen around the body. It can also transport carbon dioxide and carbon monoxide.
Haemoglobin combines with oxygen in the lungs to form a compound called oxyhaemoglobin. It then carries the oxygen around the body. In the capillaries, haemoglobin separates from the oxygen and releases it for respiratory uses.
Haemoglobin also combines with carbon dioxide to form carbaminohaemoglobin. This is transported to the lungs for exchange with oxygen.
Haemoglobin can also combine with carbon monoxide to form carboxyhaemoglobin. Carboxyhaemoglobin does not break down (dissociate). This causes death to an individual, because the haemoglobin is not released to collect more oxygen.
White blood cells
White blood cells are formed in the bone marrow of long bones and in the lymph nodes. They are also called leukocytes.
They have a nucleus. They are colourless.
They have no definite shape. They are fewer in number.
There are two types of white blood cells, depending on the size of the nuclei
- Lymphocytes have very large nuclei. They produce antibodies to fight infections.
- Phagocytes have irregular nuclei. They engulf and destroy (digest) harmful pathogens that enter the body. This process is called phagocytosis.
Platelets
Platelets are small fragments from large cells. They are also called thrombocytes.
Platelets help in blood clotting. They contain thromboplastin. When a blood vessel is injured, thromboplastin changes into its active form called thrombin.
Thrombin changes fibrinogen to fibrin. Fibrin forms fibres in the leakage. This prevents further loss of blood.
Blood plasma
Blood plasma is a pale-yellow fluid. It is composed of
- Water
- Blood proteins
- Mineral salts
- End products of digestion
- Urea
- Hormones
- Dissolved gases
Effect Of Hiv On White Blood Cells
Human Immunodeficiency Virus (HIV) causes Acquired Immunodeficiency Syndrome (AIDS).
HIV attacks T4 cells, which are called helper T cells, and destroys them.
These T-helper cells detect and recognize infections. They also help other T cells, called killer T cells, to fight the pathogens.
When the T4 cells are lost, the immune system breaks down. Communication and recognition of infections fail. This leads to opportunistic infections.
Blood Groups And Blood Transfusion
Blood groups
There are four blood groups: A, B, AB and O. These groups are due to the types of antigens present in the red blood cells.
When blood from one person is mixed with blood from another person, it may mix without any problem. In some cases, the red blood cells clump together. This process is called agglutination. It happens when an antibody comes into contact with its corresponding antigen.
Red blood cells contain proteins called antigens. There are two types: antigen A and antigen B. These antigens are used to determine blood groups.
- A person with antigen A has blood group A.
- A person with antigen B has blood group B.
- A person with both antigens A and B has blood group AB.
- A person with no antigen has blood group O.
Blood plasma contains antibodies. There are two types: 'a' and 'b'. When these antibodies come into contact with their corresponding antigens, agglutination occurs.
Table: Summary of blood groups, their antigens and antibodies
- Blood group A: antigen A, antibody b
- Blood group B: antigen B, antibody a
- Blood group AB: antigens A and B, no antibody
- Blood group O: no antigen, antibodies a and b
Blood transfusion
Blood transfusion is the transfer of blood from one person into the blood stream of another person.
A person may need blood from another person when his or her blood level has fallen below the normal level needed to sustain life. This may be due to injury or sickness.
The person who gives blood is called a donor. The person who receives blood is called a recipient.
Red blood cell antigens and plasma antibodies can cause problems during blood transfusion. So blood transfusion is possible only between compatible blood groups.
A person with blood group AB can receive blood from all blood groups. But he or she can donate blood to a person with blood group AB only. This is why a person with blood group AB is called a universal recipient.
A person with blood group O can donate blood to all blood groups. But he or she can receive blood from group O only. This is why a person with blood group O is called a universal donor.
Rhesus Antigen And Transfusion
Red blood cells have one more antigen apart from antigens A and B. This antigen is called antigen D, rhesus antigen or rhesus factor.
Most people have this antigen. They are called rhesus positive (Rh+). A few people do not have this antigen. They are called rhesus negative (Rh-).
The presence of this antigen gives the blood group a positive sign: A+, B+, AB+, O+.
The absence of this antigen gives the blood group a negative sign: A-, B-, AB-, O-.
Rhesus negative blood can be transfused safely to a rhesus positive recipient. The donor blood has no antigen D, so agglutination will not occur.
But a rhesus negative person may receive blood from a rhesus positive donor. At the first transfusion, the recipient's body is stimulated to produce antibodies against the Rh antigen. So the first transfusion causes no problem.
At the second transfusion, the body has already produced antibodies against the Rh antigen. The recipient may die due to agglutination.
Rhesus factor and pregnancy
Suppose a rhesus negative pregnant woman is expecting a rhesus positive child. If their bloods come into contact, the mother's body starts to produce antibodies against rhesus antigens. But these antibodies are produced slowly. So the first rhesus positive baby is not harmed.
The problem arises when the same woman conceives another rhesus positive child. Agglutination occurs in the fetus's blood. It is caused by the reaction between the antibodies from the mother's blood and antigen D in the fetus's blood.
This condition is called hemolytic disease. It may cause the death of the fetus before birth or soon after birth.
The child may be saved in two ways
- Transfusing blood to the fetus while it is still in the uterus.
- Injecting the rhesus negative mother with anti-rhesus globulin, which prevents the antibody-antigen reaction.
Precautions Taken During Blood Transfusion
Blood transfusion is done to save the life of a sick person. So precautions must be taken to make sure the transfusion is safe and successful.
These things should be considered before blood transfusion
- The blood from the donor should be checked to make sure it is compatible with the blood of the recipient. This prevents agglutination of the recipient's blood.
- The blood from the donor should be screened before transfusion. This makes sure it does not contain pathogens which may cause infection to the recipient.
- The donor should be healthy and aged 18 years. The donor should be given glucose or biscuits after donating blood so as to gain strength.
- The blood should be taken from veins in the arm.
- An anticoagulant should be added to the blood to prevent clotting. The blood should then be stored above freezing point.
Blood Circulation
Blood circulation is the flow of blood from the heart to different parts of the body and then back to the heart.
In mammals, blood flows through the heart twice for a complete circulation.
First, blood flows from the right ventricle of the heart to the lungs through the pulmonary artery. Then it returns to the heart through the pulmonary vein.
After that, it passes from the left ventricle to the rest of the body through the aorta.
This kind of blood circulation is called double circulation.
Double Circulation
The right auricle of the heart receives deoxygenated blood from the body through the posterior and superior vena cava. It passes the blood to the right ventricle.
The right ventricle pumps the blood to the lungs through the pulmonary artery.
From the lungs, the oxygenated blood goes back to the heart. It is received by the left auricle through the pulmonary vein. Then it is passed to the left ventricle.
The left ventricle pumps the blood to other parts of the body through the aorta.
Pulmonary circulation
The circulation of blood from the heart to the lungs and then back to the heart is called pulmonary circulation.
Systemic circulation
The circulation of blood from the heart to the body and back to the heart is called systemic circulation.
Blood Flow Through The Heart
The right atrium receives deoxygenated blood from the rest of the body through the vena cava. It passes the blood to the right ventricle.
The tricuspid valve opens to allow the blood to pass. When the right ventricle is filled with blood, the valve closes to prevent backward flow.
The right ventricle pumps the blood to the lungs through the pulmonary artery. The semi-lunar valves prevent backward flow of the blood.
Oxygenated blood from the lungs passes back to the heart through the pulmonary veins to the left atrium. From there it passes to the left ventricle. Here the tricuspid valves prevent backward flow of blood.
When the left ventricle is filled with blood, it pumps the blood with high pressure to other parts of the body through the aorta. The semi-lunar valves prevent backward flow of the blood.
Fig: The circulation of blood in the heart
Importance Of Blood Circulation
- Blood circulation helps in transportation of oxygen and nutrients to different parts of the body where they are needed.
- Blood circulation enables transportation of carbon dioxide and other metabolic waste products from the cells to their excretory organs.
- Blood circulation helps in transportation of hormones from the organs where they are secreted to the organs where they are needed.
- Blood circulation enables transportation of white blood cells from their synthesizing organs to infected areas in the body.
Diseases And Disorders Of The Circulatory System
- HIGH BLOOD PRESSURE (HYPERTENSION)
The normal human blood pressure is 120/80 mmHg.
120 is the reading of the pressure of blood created by the contraction of the left ventricle.
80 is the reading of the pressure of blood created by the relaxation of the left ventricle.
Causes of high blood pressure
- Over-eating of fatty diets. This causes fatty deposits (cholesterol) inside the walls of blood vessels. The vessels become narrow, so blood pressure rises.
- Emotional stress. It increases the pumping of blood from the heart, so blood pressure rises.
- Kidney diseases
- Smoking
- Alcoholism
Symptoms of high blood pressure
- Dizziness
- Aching and throbbing of the head and the body
- Ringing in the ears
High blood pressure can be prevented or managed by
- Reducing stress
- Regular physical exercises
- Avoiding smoking and alcoholism
- Eating a balanced diet with less fatty foods
- Using medications
- LEUKAEMIA
Leukaemia is also called blood cancer.
It is caused by abnormal and overproduction of white blood cells. These white blood cells then suppress the production of other blood cells.
Symptoms of leukaemia
- High amount of white blood cells in the blood sample
- Headache and general body weakness
- A tendency of bleeding easily
- Anaemia due to lack of red blood cells
- Infections of the mouth or throat accompanied by fever
Leukaemia is blood cancer, so it is very difficult to cure. It can only be managed by
- Frequent blood transfusion
- Chemotherapy and radiotherapy to destroy the abnormal cells
- Transplants from the bone marrow
- SICKLE CELL ANAEMIA
Anaemia is the condition in which the amount of haemoglobin or red blood cells in a specific volume of blood is below the normal level.
Sickle cell anaemia is a genetic disease. The red blood cells take a sickle shape. This reduces the surface area for oxygen transportation.
Symptoms of sickle cell anaemia
- Muscle fatigue
- Breathing difficulties during physical exercises
- Headache
- Abdominal pain
- Anaemia
- Dark coloured urine
Control and prevention
Sickle cell anaemia is a genetic disease, so it is difficult to control.
People with the defective gene should be advised not to have blood transfusion or children. This reduces the risk of passing it on to the next generation.
- HAEMOPHILIA
Haemophilia is caused by failure of shed blood to clot. The cause is lack of fibrinogen, one of the clotting factors.
As a result, too much blood is lost when there is a cut or injury.
Haemophilia can be prevented by administering blood clotting factors.
- DIABETES MELLITUS
Diabetes mellitus is a disorder in which the body fails to produce enough insulin.
Insulin regulates the amount of glucose in the blood. It does this by converting excess glucose into glycogen, which is stored in the liver.
Diabetes mellitus is characterized by hunger, thirst and excessive urination. The urine has a high glucose concentration.
Diabetes mellitus can be treated by
- Daily injection of insulin into the blood stream
- Avoiding sugary food substances
If diabetes mellitus is not treated, it can result in
- Circulatory problems
- Kidney failure
- Strokes and heart attacks
The Lymphatic System
Not all tissue fluids in the body are transported through the blood stream. Some enter another transport system called the lymphatic system.
The lymphatic system consists of lymph, lymph vessels, and lymphoid organs and tissues. These include lymph nodes, tonsils, adenoids, thymus and spleen.
Lymph is a transporting fluid. It is similar to blood, but without blood cells and plasma proteins.
Lymph is formed by a process called ultrafiltration. The blood capillaries squeeze out materials from the blood, except blood cells and plasma proteins. This fluid is called tissue fluid.
Tissue fluid contains nutrients, oxygen and other substances. Some of it enters venules and veins by diffusion. The rest enters the lymph vessels, and it is then called lymph.
Lymph nodes (lymph glands) are swellings found at some points along the lymph vessels.
Lymph nodes defend the body against diseases in different ways
- They trap bacteria by forming a network of fibres.
- They produce antibodies.
- They produce lymphocytes (white blood cells), which fight against pathogens.
Diseases And Disorders Of The Lymph System
- OEDEMA
Oedema is caused by high blood pressure in the blood capillaries.
This results in more lymph than the lymphatic system can handle. The lymph then accumulates in the tissues.
Oedema can be controlled by reducing stress and doing regular physical exercises. These may prevent the rise in blood pressure.
- ELEPHANTIASIS
Elephantiasis is caused by Filaria worms, which are transmitted by the Culex mosquito.
The Filaria worms block the lymph vessels. Lymph then accumulates and causes swelling of the legs, arms, breasts or scrotum. These swellings are the symptoms.
The disease may be controlled by killing the Filaria worms and destroying the breeding areas of the Culex mosquito.
This can be done by slashing the bushes and draining stagnant water.
- TONSILLITIS
Tonsillitis is caused by bacteria.
Its symptoms are
- High fever
- Sores in the throat
- Enlargement (swelling) of lymph nodes in the groin and neck
- Swelling of the tonsils
The disease may be controlled or prevented by
- Taking antibiotics
- Taking plenty of fluids
- Surgical removal of the tonsils
Transport Of Materials In Plants
The Vascular System
Plants, like animals, need a transport system to move materials from one part of the plant to another.
The materials transported are water, mineral salts and manufactured food.
Transport in plants is done by the vascular system.
The vascular system contains special tissues called vascular bundles. These are xylem and phloem.
Xylem and phloem are found in the roots and stems of plants.
Arrangement in roots
In the roots of both monocots and dicots, the vascular bundles are in a central position.
The xylem and phloem alternate with each other, with the xylem on the inside.
In dicots, the xylem forms a star-like structure.
Arrangement in stems
In monocots, the vascular bundles are scattered.
In dicots, the vascular bundles are arranged to form layers of rings called cambium.
Figure
The vascular system in plants is composed of xylem and phloem as vascular bundles.
Xylem
Xylem is responsible for transportation of water and mineral salts from the roots to the leaves of the plant.
The vessels that make the xylem are made of transporting cells called xylem vessels and tracheids.
Xylem vessels
- They are non-living cells.
- They are long, with hollow tubes from the roots to the leaves.
- They are lignified to prevent bursting.
Xylem tracheids
- They are cells with lignified and pitted walls.
- They have tapering ends.
- They offer support to the plant.
The movement of materials (water and mineral salts) within the xylem is called conduction. It occurs in the upward direction only.
Phloem
Phloem is responsible for transportation of manufactured food from the leaves to different parts of the plant, including storage organs.
The transporting cells that make the phloem are sieve tubes and companion cells.
Sieve tubes
- They are joined end to end to form a long tube.
- They are perforated to allow passage of materials.
Companion cells
- They provide the energy that is required for transportation of materials.
The movement of materials (manufactured food) within the phloem is called translocation. It occurs in any direction.
Absorption And Movement Of Water And Mineral Salts In Plants
The root hairs are extended epidermal cells. They are adapted for absorption of water and mineral salts from the soil. Their zone is the region of maximum absorption.
Absorption of water
Water is absorbed into the root hair by osmosis, since the cell sap is more concentrated than the soil water.
The soil solution and the xylem solution are separated by a series of cells.
When water is absorbed by the cells in the root hair, it dilutes the solution in those cells. The solution then becomes less concentrated than the solution in the adjacent cells.
This causes water to move from the root hair cells to the adjacent cells. It continues to move to other layers of cells by the same process until it reaches the xylem sap.
Absorption of mineral salts
Mineral salts are taken in by the plants by active transport.
This active transport involves substances called carriers. The carriers carry mineral ions across the plasma membrane into the cells.
The minerals are passed to the xylem and then conducted upward.
Forces That Move Water And Mineral Salts Up The Stem
The solution of mineral salts and water in the xylem is pushed up the stem with the aid of different forces. These are:
- Root pressure: This can be observed when a plant stem above the soil is cut. The cell sap comes out.
- Cohesion force: This is the force that causes attraction of like molecules. Water molecules are attracted to each other and stick together.
- Adhesion force: This is the force of attraction between unlike molecules. Water molecules are attracted to the xylem vessel walls.
- Capillarity force: This is the force that causes liquids (water) to move up a narrow tube. That is why xylem vessels are narrow.
- Transpiration pull: When water is lost from the leaves to the atmosphere, the cell sap in the leaves becomes more concentrated. This causes more movement of water from adjacent cells to replace the lost water. This causes a continuous column of water from the roots to the leaves.
Both adhesion and cohesion forces cause a continuous flow of water along the xylem.
Transpiration
Transpiration is the process whereby a plant loses excess water to the atmosphere in the form of water vapour.
Transpiration stream is the continuous movement of water from the roots to the evaporating surfaces (leaves) through the stem.
How transpiration draws water up
When water is lost to the atmosphere, the cell sap on the leaf surfaces becomes concentrated. This causes withdrawal of water from adjacent cells by osmosis.
This increases the concentration of the solution in those cells. In turn, this causes more withdrawal of water from more layers of cells, until water is drawn from the xylem vessels in the leaf veins.
This causes continuous transport of water from the roots to the leaves.
Factors Affecting The Rate Of Transpiration
- Temperature:
As temperature increases, the rate of evaporation increases. Thus the rate of transpiration increases.
- Humidity:
Humidity is the amount of water vapour in the atmosphere.
When humidity in the atmosphere is high, the rate of transpiration decreases because the atmosphere is saturated.
If humidity is low, it means the atmosphere is dry. Thus the rate of transpiration is high.
- Wind:
On windy days the rate of transpiration is high. The wind washes away the water vapour on the surface of the leaves immediately as it diffuses out.
On still days the rate of transpiration is low. The surface of the leaves becomes saturated fast with water vapour.
- Cuticle:
Leaves with a thick cuticle have a low transpiration rate.
Leaves with a thin cuticle have a high transpiration rate.
- Leaf size and shape:
Broad leaves transpire more than leaves which are not broad.
- Stomata:
Leaves with a large number of stomata transpire more than leaves with a small number of stomata and sunken stomata.
Importance Of Transpiration In Plants
- It helps in cooling of plants.
- It creates transpiration pull. This enables conduction of more water and mineral salts in the xylem.
- If transpiration is excessive, it can lead to wilting and death of the plant.
