Biology · Kidato 2

Nutrition

Dakika 37 za kusoma ·

Yaliyomo
NutritionImportance Of Nutrition In Living ThingsModes Of NutritionNutrients(a) MONOSACCHARIDES(b) DISACCHARIDES(c) POLYSACCHARIDESGroups Of ProteinsClasses Of ProteinsProperties Of ProteinsFunctions Of ProteinsLipidsSources Of LipidsProperties Of LipidsFunctions Of LipidsVitaminsTable: Vitamins, Their Sources, Functions And Deficiency DisMineral SaltsWaterRoughageDietNutritional Requirements For Different Groups Of PeopleNutritional Deficiencies And Disorders In HumansDigestive System In HumansTerms Used In The Digestive SystemTwo Ways Of Breaking Down FoodHuman Digestion ProcessDigestion In The Mouth(C6H10O5)n + H2O → C12H22O11SwallowingDigestion In The StomachDigestion In The DuodenumDigestion In The Ileum (Small Intestine)End Products Of DigestionAbsorptionDigestive System Of RuminantsDifferences Between The Digestive System Of Ruminants And HuCommon Diseases And Disorders Of The Digestive SystemNutrition In PlantsMaterials And Conditions Necessary For PhotosynthesisThe Process Of Photosynthesis2H2O = 4H+ + O2CO2 + 4H+ = (CH2O)n + H2OImportance Of PhotosynthesisMineral Requirements In PlantsThe Role And Deficiency Symptoms Of Mineral Elements In PlanProperties Of Food SubstancesProperties Of CarbohydratesProperties Of ProteinsProperties Of LipidsFood Processing, Preservation And StorageImportance Of Food Processing, Preservation And StorageMethods Of Food PreservationTraditional Methods Of Food PreservationModern Methods Of Food PreservationDifferences Between Traditional And Modern Methods Of Food P

Nutrition

Definition of nutrition

Nutrition is the way in which living organisms feed so as to obtain materials (nutrients) which make them live.

Another definition: nutrition is the process by which living things obtain nutrients and use them in their bodies.

Importance Of Nutrition In Living Things

  • Nutrients help in growth and development of living organisms.
  • Nutrients are required to replace worn out and damaged cells or tissues.
  • Nutrition helps in protection against diseases because of the nutrients acquired.
  • Nutrients provide energy for muscle contraction and relaxation.

Modes Of Nutrition

There are two major modes of nutrition

  1. Autotrophic nutrition
  2. Heterotrophic nutrition

Autotrophic nutrition

Autotrophic nutrition is the mode of nutrition whereby living organisms make their own food. They use simple inorganic raw materials such as carbon dioxide and water.

Organisms which show this mode of nutrition are called autotrophs.

Green plants make their own food using sunlight energy. This process is called photosynthesis. In it, plants use chlorophyll to trap sunlight energy.

Heterotrophic nutrition

Heterotrophic nutrition is the mode of nutrition whereby living organisms take in already manufactured food. Another way to say it: they take in readymade food, for example carbohydrates, proteins and fats.

Organisms which show this mode of nutrition are called heterotrophs. An example is animals.

Nutrients

Food substances are called nutrients. They include

  • Carbohydrates
  • Proteins
  • Fats
  1. CARBOHYDRATES

Carbohydrates are compounds which contain the elements carbon, hydrogen and oxygen. These elements are in the proportion of 1:2:1.

Carbohydrates include sugar.

There are three groups of carbohydrates

  • Monosaccharides
  • Disaccharides
  • Polysaccharides

(a) MONOSACCHARIDES

Monosaccharides are simple forms of carbohydrates. They are also called simple sugars. Their chemical formula is C6H16O6.

Examples: glucose, fructose and galactose.

Properties of monosaccharides

  • They are soluble in water, forming a sweet tasting solution.
  • They can form crystals.
  • Two monosaccharides can combine by a process called condensation to form a disaccharide and water.

Glucose + Glucose → Maltose + Water

  • If a monosaccharide is heated with Benedict's solution (copper sulphate), it reduces the copper sulphate to copper I sulphate. In this case, monosaccharides are called reducing sugars.

(b) DISACCHARIDES

Disaccharides are formed by combining two monosaccharides by the process called condensation.

Disaccharides can be broken down back into their monosaccharides by a process called hydrolysis. Hydrolysis involves the addition of water.

Table: Examples of disaccharides and their monosaccharides

  • Sucrose (cane sugar) = Glucose + Fructose
  • Maltose (malt sugar) = Glucose + Glucose
  • Lactose (milk sugar) = Glucose + Galactose

Properties of disaccharides

  • They are soluble in water and form a sweet tasting solution.
  • They can form crystals (they are crystalline).
  • Some disaccharides reduce copper sulphate in Benedict's solution when heated with it. These are called complex reducing sugars.
  • Some disaccharides cannot reduce copper sulphate in Benedict's solution when heated with it. These are called non-reducing sugars.

(c) POLYSACCHARIDES

Polysaccharides are formed by combining many monosaccharides. So they are complex carbohydrates.

Examples

  • Starch, which is the storage form of carbohydrates in plants.
  • Cellulose, which is a component of the cell wall in plants.
  • Glycogen, which is the stored form of carbohydrates in animals.

Properties of polysaccharides

  • They are not sweet.
  • They are insoluble in water.
  • They cannot form crystals.
  1. PROTEINS

Proteins are compounds that contain hydrogen, carbon, oxygen and nitrogen. Sometimes they also contain phosphorus and sulphur.

They are also called nitrogenous compounds because they contain nitrogen.

Proteins are made up of chains of small molecules called amino acids. Amino acids are joined by condensation to form a protein molecule called a dipeptide or polypeptide. The bond between the amino acids is called a peptide bond.

Sources of proteins

There are two main sources of proteins: plants and animals.

  • Sources of plant proteins include beans, peas, cereal grains and nuts.
  • Sources of animal proteins include meat from fish, insects, birds and mammals. Others are eggs, milk and cheese.

Groups Of Proteins

Naturally, proteins are grouped into two groups, which are

  1. Essential amino acids

These are amino acids which cannot be synthesized inside the body.

  1. Non-essential amino acids

These are amino acids which are synthesized in the body.

Classes Of Proteins

First class proteins

These contain all the essential amino acids.

Examples: animal proteins and soya beans.

Second class proteins

This group lacks one or more essential amino acids.

Examples: plant proteins such as beans and peas.

Properties Of Proteins

  • Most proteins form colloidal suspensions when dissolved in water. They do not form a true solution.
  • Proteins are denatured by high temperature above 40°C.
  • Proteins react with both acids and bases. For this reason they are called amphoteric compounds.
  • Proteins also react with non-proteins to form conjugated proteins.

Examples: haemoglobin, which is formed by protein and iron; and mucus, which is formed by protein and carbohydrates.

Functions Of Proteins

  1. Growth and repair of dead, damaged or old cells.
  1. Defense and protection.

Proteins make antibodies. Antibodies give the body enough immunity to fight against diseases.

  1. Functional units.

Proteins perform different functions.

Examples

  • Enzymes: proteins which speed up biochemical reactions in the body.
  • Haemoglobin: a protein used to transport oxygen from the lungs to other parts of the body. It is found in red blood cells.
  • Hormones: proteins which regulate different activities in the body.
  • Fibrinogen: the protein that controls the process of blood clotting.
  1. Source of energy.

Sometimes proteins become a source of energy when the body lacks carbohydrates and fats. This happens mostly during starvation.

  1. Structural compounds.

Some proteins are components of various structures such as muscle fibres, hooves, nails, feathers, wool and hair.

Lipids

Lipids are compounds containing carbon, hydrogen and oxygen, but in different proportions from those in carbohydrates. The proportion of oxygen is much lower in lipids.

Lipids occur in two forms

  • Fats: solid at room temperature and found in animals.
  • Oils: liquid at room temperature and obtained from plants.

Sources Of Lipids

  • Fats are obtained from milk, groundnuts, coconuts, cashew nuts and fruits such as avocado and oyster fruits.
  • Oils are obtained from castor seeds, maize grains and sunflower.

Properties Of Lipids

  • They are insoluble in water. They are said to be hydrophobic.
  • They are inactive. That is why they are stored in the tissues of organisms (as adipose tissue in animals).
  • Fats melt at high temperatures, while oils solidify at low temperatures.

Functions Of Lipids

  1. Source of energy.

Lipids are broken down during respiration to release energy to the body.

  1. Source of metabolic water.

When fats are oxidized, they release energy and water. This water is known as metabolic water. It is an alternative source of water for animals living in desert places.

  1. Protection.

Fats are deposited around major organs such as the heart and kidney. There they act as shock absorbers.

  1. Insulation.

Fats are deposited below the skin as adipose tissue. This prevents heat loss from the body.

  1. Constituent of plasma membrane and protoplasm.

Phospholipids are a special type of lipid. They are a major component of the cell membrane and protoplasm.

  1. Store of vitamins.

Vitamins which are soluble in fats are stored in fats. Examples: vitamins A, D, E and K.

Vitamins

Vitamins are organic compounds which are produced by both plants and animals.

Some vitamins are synthesized by animals. For example, vitamin D is synthesized by the skin using sunlight.

Vitamins as food substances help our bodies fight against diseases. If our bodies lack vitamins, symptoms of deficiency and malnutrition disorders are observed.

Vitamins are required in small quantities to keep the body healthy. If they are obtained in a very large quantity, they may interfere with some of the body's activities.

Table: Vitamins, Their Sources, Functions And Deficiency Disorders

Vitamin A (Retinol or Retinene)

  • Sources: vegetables, liver, eggs, animal fats and palm oil.
  • Functions: forms visual pigments for proper night vision; cell growth; skin protection; they are antioxidants.
  • Deficiency disorder: night blindness (poor night vision).

Vitamin B1 (Thiamine)

  • Sources: egg yolk, kidney, beans, lean meat and unpolished cereals.
  • Functions: proper growth in children; cell respiration.
  • Deficiency disorder: beriberi (retarded growth, wasting of muscles, swelling of legs).

Vitamin B2 (Riboflavin)

  • Sources: vegetables, egg yolk, kidney, yeast, unpolished cereals and lean meat.
  • Functions: normal skin health; cell respiration.
  • Deficiency disorders: pellagra; bleeding in the gum; skin disorders.

Vitamin B5 (Pantothenic acid)

  • Sources: similar to those of B1 and B2.
  • Function: normal functioning of the nervous system and the gut.
  • Deficiency disorder: malfunctioning of the nervous and digestive systems.

Vitamin B12 (Cobalamin)

  • Sources: liver and beef.
  • Functions: formation of blood cells; enzymatic activities in the formation of methionine.
  • Deficiency disorder: pernicious anaemia.

Vitamin C (Ascorbic acid)

  • Sources: citrus fruits, blackcurrant, tomatoes and fresh green vegetables.
  • Function: protection against infections.
  • Deficiency disorder: scurvy.

Vitamin D (Calciferol)

  • Sources: liver, egg yolk, fish oil; it is also formed in the skin by sunlight.
  • Function: formation and hardening of bones.
  • Deficiency disorder: rickets.

Vitamin E (Tocopherol)

  • Sources: green vegetables, vegetable oil and milk.
  • Function: fertility in animals.
  • Deficiency disorder: sterility in some animals.

Vitamin K (Quinone)

  • Sources: fresh green vegetables such as spinach and cabbage, unpolished cereals, liver, egg yolk and yeast.
  • Function: blood clotting.
  • Deficiency disorder: excessive bleeding.

Mineral Salts

Mineral salts are elements that contain inorganic compounds. They are essential for body metabolism.

Mineral nutrients take part in different chemical reactions in the body.

Mineral salts are grouped into two groups

  1. Macro-nutrients
  2. Micro-nutrients

Macro-nutrients

Macro-nutrients are required in large quantities in the body.

Examples

  • Nitrogen (N)
  • Oxygen (O)
  • Phosphorus (P)
  • Potassium (K)
  • Calcium (Ca)
  • Magnesium (Mg)
  • Carbon (C)

Micro-nutrients

Micro-nutrients are required in small quantities. They are also called true elements.

Examples

  • Copper (Cu)
  • Zinc (Zn)
  • Manganese (Mn)
  • Boron (Bo)

Table: Different mineral elements, their sources and functions

Calcium (Ca)

  • Source: milk, milk products, green vegetables
  • Function: strengthens bones and teeth
  • Function: muscle contraction, nerve impulse transmission, blood clotting

Chlorine (Cl)

  • Source: table salt, sea foods
  • Function: maintenance of tissue fluids, blood and lymph

Iodine (I)

  • Source: ground water, sea foods, added table salt
  • Function: synthesis of thyroid hormone (for growth regulation)

Iron (Fe)

  • Source: liver, green vegetables, yeast and eggs
  • Function: formation of haemoglobin (the red pigment in red blood cells, responsible for oxygen transportation)

Magnesium (Mg)

  • Source: green vegetables
  • Function: healthy bones and teeth, muscle contraction

Nitrogen (N)

  • Source: protein foods
  • Function: synthesis of proteins

Phosphorus (P)

  • Source: protein foods
  • Function: healthy bones and teeth, protein synthesis

Potassium (K)

  • Source: most foods
  • Function: muscle contraction, nerve transmission

Sodium (Na)

  • Source: table salt, green vegetables
  • Function: maintenance of tissue fluid balance, muscular contraction and nerve transmission

Sulphur (S)

  • Source: essential animal and methionine in animal protein
  • Function: synthesis of proteins

Water

Water is a compound of hydrogen and oxygen.

Water forms about 90% of the cell. It is a universal solvent with high heat capacity and surface tension.

Water is a very essential substance in the diet because of its functions in the body.

Functions of water

  • Water forms a large proportion of the cell cytoplasm (90%).
  • Water is needed in many chemical reactions taking place inside the cell.
  • Water is needed in food digestion, where it helps the process of hydrolysis.
  • Water is used in various cooling processes in the body through sweating.
  • Water acts as a lubricant, so it reduces friction between surfaces. Examples are the eyelids and eyeballs.
  • Water maintains the shape of the cell and organs.

Note: Approximately 70% of the human body is water.

Roughage

Roughage is cellulose, or plant fibre.

Plant fibres can be digested by an enzyme called cellulase. Animals do not secrete this enzyme. It is secreted by microorganisms such as bacteria, and these microorganisms are not found in humans.

Roughage is important in the diet because it adds bulk to food. It helps the peristalsis movement of food and prevents constipation.

Diet

A diet is the set of all foods taken in a meal.

Balanced diet

A balanced diet is a meal that contains all types of food in the right proportions. These include carbohydrates, proteins, fats, vitamins and others.

The body should be supplied with a balanced diet so that it can carry out all life processes properly.

Nutritional Requirements For Different Groups Of People

Different people have different nutritional requirements. These depend on sex, body size, age, state of the body and occupation (activity).

  • Expecting mothers require more food than normal. The food should have a high amount of protein for growth and development of the foetus. It should also have vitamins as protective food.
  • Lactating women require food which stimulates the production of milk for the babies. They also need proteinous foods for the growth of the babies.
  • Young children require a balanced diet with a high proportion of proteins and vitamins. These are for growth and protection against diseases.
  • Elderly people require less food, but with a high nutritional value of vitamins, minerals and proteins. These help their bodies to repair worn out tissues and maintain good health.
  • Sedentary workers (office workers) require a low quantity of energy-giving food. Manual workers need a large amount of energy-giving food in their diet because their work involves high energy use.
  • Sick people require a balanced diet with a high proportion of proteins, which help to repair worn out or damaged tissues. They also need foods with a high amount of vitamins and minerals, which help to boost the immune system of the body.

Nutritional Deficiencies And Disorders In Humans

Nutritional disorders and deficiencies occur when the body is not getting enough nutrients.

Malnutrition

Malnutrition is the situation that results when the body has obtained too little or too much food. It also results from taking a diet that lacks some essential food components.

  1. Marasmus

Marasmus is a nutritional disorder caused by a general lack of enough food in the body. It commonly affects children under the age of five years.

Symptoms of marasmus

  • Stunted growth
  • Loss of weight
  • General body weakness (weak muscles)
  • Dry loose skin
  • The child feels hungry all the time
  • Diarrhoea

Prevention and control measures

  • A person should eat enough food, and the food should be in a balanced diet.
  1. Kwashiorkor

Kwashiorkor is a malnutritional disorder caused by inadequate intake of proteins. It commonly affects children between six months and five years of age.

Symptoms of kwashiorkor

  • Stunted growth
  • Protruding stomach and swollen lower parts of the limbs
  • Dry skin that cracks easily
  • Weakness and sleepiness
  • Loss of appetite
  • Diarrhoea
  • Change of hair pigment due to a decrease of melanin, so the hair texture changes and the hair is easily plucked off

Control measure

  • Eat a well balanced diet with a high nutritional value of proteins.
  1. Obesity

Obesity means overweight. It is caused by taking a lot of carbohydrates, fats and oils, exceeding the normal body requirements.

The effect of obesity is that it causes blood pressure and heart diseases.

Symptoms of obesity

  • Increased body weight
  • High blood pressure
  • Diabetes
  • Gall stones
  • Strokes
  • Arthritis in the legs
  • Heart diseases

Preventive and control measures

  • Avoid eating fatty or oily foods and sugary or sweet foods.
  • Take a balanced diet with more vegetables and fruits, lean meat and little carbohydrate.
  • Exercise is highly recommended.
  1. Anorexia nervosa

Anorexia nervosa is a disease that commonly occurs in teenage females. This is because they are sensitive about their body weight and shape.

Symptoms

  • Loss of weight
  • Slim bodies
  • Weak heartbeat
  • Low self esteem

Prevention

  • Teenagers should believe in themselves.
  • Seek medical treatment and avoid dieting.
  1. Goitre

Goitre is a swelling or a large mass of tissue in the neck region. It results from abnormal growth of the thyroid gland, which is caused by lack of iodine in the diet.

Digestive System In Humans

The human digestive system is made up of the alimentary canal and other associated organs, such as the pancreas and the liver.

The alimentary canal is a long hollow tube that starts from the mouth and ends at the anus. Food digestion starts in the mouth.

Terms Used In The Digestive System

  • Digestion: the process whereby food is chemically and mechanically broken down into small particles that the body can absorb.
  • Absorption: the process whereby digested food is diffused into the blood stream.
  • Assimilation: the process whereby the end products of digestion are incorporated into cell metabolism.
  • Ingestion: the process of taking in food through the mouth.
  • Egestion: the process whereby undigested food materials are removed from the body through the anus.
  • Enzymes: biological catalysts which either slow down or speed up the chemical reactions inside the cells.

Two Ways Of Breaking Down Food

In humans and other mammals, digestion involves two ways of breaking down food. These are mechanical breakdown and chemical breakdown.

Mechanical breakdown

  • It takes place in the mouth.
  • Food is broken into smaller particles by chewing, so that it becomes easy to swallow.
  • It also increases the surface area for enzymes to act on the food.

Chemical breakdown

  • It breaks down large, complex food molecules into small, simple molecules that the body can absorb.

Human Digestion Process

Human digestion starts in the mouth and continues as food passes through the alimentary canal.

Food moves through the alimentary canal by a movement called peristalsis. Peristalsis is the wave-like contraction of muscles that pushes the boluses down the alimentary canal. In other words, it is the wave-like movement of food through the alimentary canal.

Figure: Peristalsis movement of food through the alimentary canal

Figure: Human digestive system

Digestion In The Mouth

In the mouth, the ingested food is broken down both chemically and mechanically.

Mechanical digestion

The food is broken into smaller particles by chewing.

Chewing is important because

  • It breaks large food particles into small particles that are easy to swallow.
  • It mixes the food with saliva, making it slippery for easy swallowing.
  • It provides a large surface area for the digestive enzymes in saliva to act on the food.

Chemical digestion

In the mouth, food is also broken down chemically by an enzyme in the saliva. This enzyme is salivary amylase (ptyalin). It catalyses the hydrolysis of starch into maltose.

(C6H10O5)n + H2O → C12H22O11

Starch + Water → Maltose

Functions of saliva

  • It contains salivary amylase, which digests starch.
  • It contains mucin, which lubricates the food for easy swallowing.
  • It contains water, which is a solvent for dissolving food materials. Water also moistens the mouth, making it easy for a person to talk.

Swallowing

In the mouth, the tongue rolls the food into round masses called boluses.

The boluses are swallowed and pass through the oesophagus by peristalsis.

This movement of food from the mouth to the stomach is not influenced by the force of gravity. That is why a person can eat while lying down horizontally.

At the junction between the oesophagus and the stomach there is a ring of muscles called the cardiac sphincter. It relaxes when food reaches it and allows the food to enter the stomach. Then it closes again to prevent food from moving back into the oesophagus.

Digestion In The Stomach

The stomach is a muscular sac in which food is stored temporarily before further digestion takes place.

In the stomach, food continues to be mixed by a process called churning. Churning happens by the contraction and relaxation of the stomach muscles.

The food is mixed with gastric juices. This produces a creamy semi-liquid mass called chyme. The chyme is acidic because of the presence of hydrochloric acid.

Gastric juices are secreted by gastric glands situated on the walls of the stomach.

Gastric juices contain the following

  1. Hydrochloric acid
  • It provides an acidic environment in the stomach, which is suitable for enzyme action.
  • It hydrolyses complex sugars into simple sugars.
  • It kills bacteria present in the food.
  • It activates pepsinogen into pepsin.
  1. Pepsin
  • This enzyme catalyses the breakdown of proteins into smaller proteins called peptides.
  • This is the first step of the chemical breakdown of proteins.

Proteins + Water → Peptides

  1. Renin
  • Renin is not a digestive enzyme.
  • It coagulates (solidifies) the soluble milk protein (casein) into an insoluble curd, so that pepsin can act on it.
  • Renin is produced in young suckling mammals.
  1. Mucus
  • It protects the stomach walls against corrosion by hydrochloric acid.

The chyme in the stomach then moves to the duodenum through a ring of muscles called the pyloric sphincter.

Digestion In The Duodenum

The duodenum is the first part of the small intestine. It comes just after the stomach.

The duodenum is associated with two organs, the liver and the pancreas. They pour their secretions into the duodenum. The pancreas sends its secretion through the pancreatic duct. The bile goes through the bile duct from the gallbladder (the source calls it the "bladder").

Bile

The liver cells produce (secrete) bile and store it in the gallbladder. Bile is then released through the bile duct into the duodenum.

Bile is a yellowish-green juice. It contains bile salts. Its greenish-yellow colour is due to the breakdown of worn-out red blood cells.

Functions of bile

  • Bile breaks down lipids (fats) into tiny fat droplets. This process is called emulsification. It increases the surface area for more enzyme activity.
  • Bile is alkaline. It neutralizes the acidic nature of the chyme and provides an alkaline medium in which the enzymes work best.

Pancreatic juice

The pancreas secretes digestive juices. These contain sodium bicarbonate (sodium hydrogen carbonate) and digestive enzymes.

The sodium hydrogen carbonate neutralizes the acidic chyme from the stomach. This provides an alkaline medium in which the pancreatic enzymes work best.

Digestive enzymes from pancreatic juice

  1. Pancreatic amylase: breaks down the remaining starch into maltose.
  1. Pancreatic lipase: digests fat droplets into fatty acids and glycerol.
  1. Trypsin: breaks down the remaining proteins into peptides. It is secreted in an inactive form called trypsinogen. Trypsinogen is activated by an enzyme called enterokinase, which is secreted from the duodenal walls.

The mixture that results in the duodenum is called chyle.

From the duodenum, the chyle is moved to the small intestine by peristalsis.

Digestion In The Ileum (Small Intestine)

The ileum is the longest part of the small intestine. It connects the duodenum and the large intestine. It is about 6 metres long in humans.

The walls of the small intestine contain secretory cells. They secrete mucus and intestinal juice. Intestinal juice is an alkaline fluid.

Digestive enzymes in the intestinal juice

  1. Erepsin (peptidase): a mixture of protein-digesting enzymes. It catalyzes the hydrolysis of the remaining peptides into amino acids. Amino acids are the end product of protein digestion.

Peptides + Water = Amino acids

  1. Maltase: catalyzes the hydrolysis of maltose into glucose. Glucose is the end product of starch digestion.

Maltose + Water = Glucose

  1. Sucrase: catalyzes the hydrolysis of sucrose into glucose and fructose.

Sucrose + Water = Glucose + Fructose

  1. Lactase: catalyzes the hydrolysis of lactose into glucose and galactose.

Lactose + Water = Glucose + Galactose

  1. Lipase: catalyzes the hydrolysis of the remaining fats into fatty acids and glycerol.

Fats + Water = Fatty acids + Glycerol

The process of digestion ends in the ileum (small intestine).

Major functions of the ileum

  • Digestion of carbohydrates, lipids and proteins.
  • Absorption of the end products of digestion into the bloodstream.

End Products Of Digestion

End products are the simplest forms of food that the body can absorb. They are

  • Amino acids: the simplest form of proteins.
  • Glucose: the simplest form of carbohydrates.
  • Fatty acids and glycerol: the simplest form of lipids.

TABLE: Summary of the digestion process in the human digestive system

(The table is not included in the notes given.)

Absorption

Absorption is the process in which soluble end products of digestion diffuse into the bloodstream.

Absorption takes place in the ileum (small intestine).

Adaptation of the ileum to digestion and absorption

  • It is long. This gives a large surface area and allows maximum time for digestion and absorption.
  • It has finger-like projections called villi (singular: villus). They increase the surface area for absorption.
  • The villi are associated with a dense network of blood capillaries and lymphatic vessels. These make absorption of digested materials easy.
  • The ileum has a thin layer of cells. This allows easy diffusion of digested materials.

How absorption takes place in the ileum

  • Amino acids and glucose (simple sugars) are absorbed into the blood capillaries by active transport. These capillaries join to form one large vein called the hepatic vein. It carries the digested food to the liver.
  • Fatty acids and glycerol are absorbed into the lacteals. The lacteals join the rest of the lymphatic system of the body. The lymphatic system finally empties these food materials into the bloodstream (vena cava).
  • Undigested food materials and water pass from the caecum into the colon by peristalsis. During this passage, water is reabsorbed in the colon into the bloodstream. This avoids dehydration.
  • Undigested food passes slowly into the rectum. When the rectum is full, the person feels the need to defecate. The sphincter muscles of the anus relax and allow the waste to come out. This process is called egestion.

FIGURE: Structure of a villus

(The figure is not included in the notes given.)

Digestive System Of Ruminants

Ruminants are animals that have a rumen.

The rumen is an extension of the oesophagus. Ruminants store food there temporarily. Later the food is brought back to the mouth for further chewing.

Ruminants have a four-chambered stomach. The chambers are the rumen, reticulum, omasum and abomasum.

The reticulum and omasum are called the false stomach. They do not contain gastric juices.

The abomasum is the true stomach. It secretes gastric juices containing enzymes.

Digestion in ruminants

  1. The food is partly chewed and then swallowed. It goes into the rumen.
  1. In the rumen there are bacteria. They produce (secrete) enzymes called cellulase. Cellulase breaks cellulose into glucose.
  1. During the ruminant's resting time, it regurgitates food particles from the rumen back to the mouth for further chewing.
  1. The chewed food is swallowed again. It passes straight to the reticulum and then to the omasum.
  1. In these chambers the food is churned and mixed with some water.
  1. The food then passes into the abomasum. There the gastric juices act on the food as in humans. Hydrochloric acid kills the bacteria that were in the food.

FIGURE: Alimentary canal of a ruminant

(The figure is not included in the notes given.)

Differences Between The Digestive System Of Ruminants And Humans

Ruminants

  1. They have a four-chambered stomach.
  1. They can digest cellulose through the enzyme cellulase.
  1. They chew cud.
  1. They have a relatively long alimentary canal.

Humans

  1. They have only one stomach.
  1. They have no cellulase enzyme to digest cellulose.
  1. They do not chew cud.
  1. They have a relatively short alimentary canal.

Common Diseases And Disorders Of The Digestive System

The common diseases and disorders of the human digestive system include

  • Dental caries
  • Heartburn
  • Indigestion
  • Ulcers
  • Constipation
  • Flatulence
  1. DENTAL CARIES

Dental caries is the scientific name for tooth decay.

It is caused by bacteria called plaque. These bacteria are found in the sticky white substance on the teeth.

The bacteria feed on sugars from the diet. They produce acids as wastes.

The acids corrode the enamel of the teeth. This produces a hole in the enamel and exposes the surface, which is then degraded more easily.

When the dentine is reduced, the nerve inside the cavity is exposed to heat, cold and pressure. This causes pain.

How to prevent dental caries

  • Brush your teeth with a toothbrush and toothpaste. This cleans the teeth and removes all sugars left from food.
  • Avoid foods with too much sugar.
  • Eat foods rich in vitamins A, C and D, calcium and phosphorus. These are important for developing strong and healthy hard teeth.
  1. CONSTIPATION

Constipation is a condition in which a person is unable, or finds it difficult, to remove undigested food materials from the bowel through the anus.

It is caused by eating a poor diet that lacks fibre. Foods that contain fibre include fruits, green vegetables, natural fibres and roughage.

Foods that lack fibre move slowly through the digestive tract. More water is then reabsorbed into the bloodstream as the food passes through the colon. This results in drier faeces, which are difficult to pass through the anus.

Prevention and control measures

  • Drink more water.
  • Eat food with more fruits and natural fibres.
  1. FLATULENCE

Flatulence is an uncomfortable feeling caused by too much gas in the stomach.

It occurs when a person eats gas-producing foods such as beans and green vegetables.

Prevention

  • Avoid foods which induce gases.
  1. ULCERS

Ulcers are wounds in the stomach or in the small intestine. They are caused by too much acid in the digestive tract.

There are two types of ulcers

  • Peptic ulcers: ulcers found in the stomach.
  • Duodenal ulcers: ulcers found in the duodenum.

Prevention and control measures

  • Do not eat too much food, beyond the normal limit. It is better to eat small meals often than one big meal at a time.
  • Avoid foods and drinks which make ulcers worse. Examples are spices, pepper, carbonated drinks, alcoholic drinks, fatty or greasy foods, beans and citrus fruits.
  • Drink a lot of water. It reduces the strength of the acid in the stomach.
  • Avoid anger, tension and stress, because they increase acid secretion in the stomach.
  • Avoid medicines like aspirin and iron salt. They make ulcers worse.
  1. HEARTBURN

Heartburn is a burning sensation in the oesophagus. It is caused by excess acid in the stomach that leaks back into the oesophagus.

Prevention and control measures

  • Avoid acidic and greasy foods.
  • Avoid too much coffee and alcohol.
  • Drink milk to reduce the concentration and strength of the acid.
  • Take antacid tablets like Actal and magnesium. They help to neutralize the acid in the stomach.
  • If heartburn gets worse, especially at night, try sleeping with the upper body raised.
  1. INDIGESTION

Indigestion is discomfort and pain in the stomach caused by eating too much food.

It can be avoided by eating the right amount of food at the right times in a day.

Nutrition In Plants

Plants are autotrophs. This means they make their own food.

Green plants make their own food by a process called photosynthesis.

Photosynthesis is the process by which green plants, some bacteria and protists manufacture their own food from simple inorganic materials (water and carbon dioxide) in the presence of sunlight energy.

In green plants, photosynthesis takes place mostly in the leaves.

External parts of the leaf and their functions

  • Petiole: also called the leaf stalk. It attaches the leaf to the stem.
  • Veins: they transport materials within the leaf.
  • Midrib: it gives rise to the veins. It is absent in monocotyledons.
  • Lamina: it is green and contains photosynthetic tissues. It has a large surface area for maximum absorption of light and carbon dioxide.

Figure: External parts of the leaf

Internal parts of a leaf and their functions

  1. Cuticle

The cuticle is a thin, transparent and waterproof layer. It is found on both sides of the leaf.

Functions

  • It reduces excessive water loss.
  • It protects the inner tissues from mechanical damage and from the entry of pathogens.
  1. Epidermis

The epidermis is also a thin layer found on both sides of the leaf.

Functions

  • It secretes the cuticle.
  • It protects the inner tissues from mechanical damage.
  1. Guard cells

Guard cells are bean-shaped epidermal cells. They are found on the lower surface of the leaf.

Functions

  • They control the opening and closing of the stomata. In this way they control water loss through transpiration and gaseous exchange.
  • They also contain chloroplasts, which trap sunlight energy for photosynthesis.
  1. Palisade layer

The palisade layer is the layer of cells between the upper epidermis and the spongy mesophyll layer.

The cells in this layer are called palisade cells. They contain many chloroplasts and are rectangular in shape. They are arranged at right angles for maximum trapping of sunlight energy.

Function

  • They trap sunlight energy using the chlorophyll in their chloroplasts.
  1. Spongy mesophyll layer

This layer is found between the palisade layer and the lower epidermis.

Its cells are irregular in shape. They are arranged so that they create air spaces. These cells have fewer chloroplasts.

Functions

  • It traps sunlight using the chlorophyll in the chloroplasts in its cells.
  • It helps in the diffusion of gases in the leaf, because of the air spaces in it.
  1. Vascular bundles (leaf veins)

Vascular bundles are the conducting tissues of the plant.

  • Xylem: transports water and mineral salts from the roots to other parts of the plant, including the leaves.
  • Phloem: transports manufactured food from the leaves to other parts of the plant, including storage organs (roots and stem).
  1. Stoma

Stomata are holes found in the lower epidermis.

Their function is to allow exchange of gases and the passage of waste products (by-products of photosynthesis).

Figure: Internal structure of the leaf

Materials And Conditions Necessary For Photosynthesis

  1. Water

Water is absorbed by the roots from the soil. It is a necessary raw material for photosynthesis.

  1. Carbon Dioxide

The plant obtains carbon dioxide from the atmosphere. It enters through the stomata on the leaves and the lenticels on the stem.

  1. Chlorophyll

Chlorophyll is a green pigment produced in the chloroplast. Its function is to trap the sunlight energy that is needed for photosynthesis.

  1. Light

Light is obtained from sunlight. It is the energy needed for photosynthesis.

The Process Of Photosynthesis

Photosynthesis takes place in the chloroplast.

It takes place in two stages: the light stage and the dark stage.

Light stage of photosynthesis

This stage takes place in the grana of the chloroplast.

The chlorophyll traps light energy from the sun. This energy is used to split water molecules into hydrogen ions and oxygen. This process is called photolysis.

2H2O = 4H+ + O2

(Water = Hydrogen ions + Oxygen)

Photolysis is the process whereby a water molecule is broken down into hydrogen ions and oxygen under the influence of light energy.

The oxygen gas released after photolysis is used in respiration.

The hydrogen ions are used in the next stage of photosynthesis, called the dark stage.

The solar energy absorbed by the chlorophyll is also used to form Adenosine Triphosphate (ATP). The ATP is used later in the dark stage of photosynthesis.

Dark stage of photosynthesis

This stage takes place in the stroma of the chloroplast.

At this stage, carbon dioxide combines with hydrogen to form simple sugars like glucose.

The process in this stage is called carbon dioxide fixation.

The ATP produced in the light stage is used in this stage.

CO2 + 4H+ = (CH2O)n + H2O

(Carbon dioxide + Hydrogen ions = Simple sugar + Water)

The end products of photosynthesis are glucose, oxygen and water.

Importance Of Photosynthesis

Photosynthesis is very important in the life of many living organisms on earth. It plays many roles, such as:

  • Food production: animals of higher trophic levels (heterotrophs) depend on photosynthesizing plants to get their nutrients.
  • Balancing atmospheric gases: photosynthesis uses carbon dioxide that accumulates in the atmosphere and is not wanted by animals. This helps prevent global warming. It also releases oxygen as an end product. Animals use this oxygen, and it ensures their survival.
  • Energy conversion: photosynthesis converts sunlight energy to chemical energy. This makes the energy from the sun usable by other organisms in their life processes, like movement, respiration, sensitivity, growth and excretion.

Mineral Requirements In Plants

For plants to make their own food, they need minerals. Plants obtain these minerals from the soil.

There are two types of mineral elements required by plants

(a) Macro-elements or nutrients

(b) Micro-elements or nutrients

Macro nutrients

Macro nutrients are elements that plants require in large quantities.

Examples: Carbon (C), Magnesium (Mg), Calcium (Ca), Oxygen (O), Phosphorus (P), Sulphur (S), Hydrogen (H), Potassium (K) and Nitrogen (N).

Micro nutrients

Micro nutrients are elements that plants require in small quantities.

Examples: Zinc (Zn), Sodium (Na), Molybdenum (Mo), Boron (B), Cobalt (Co), Chlorine (Cl), Copper (Cu), Silicon (Si) and Manganese (Mn).

These nutrients may be added to the soil in the form of fertilizer.

Some of these minerals are essential for plant growth and health. They are Nitrogen, Phosphorus, Potassium, Magnesium, Calcium, Sulphur and Iron.

Every mineral element has specific functions in the plant body. These include the production of building materials and other metabolic activities of the plant.

If the plant lacks one of the elements, it will show a deficiency symptom.

The Role And Deficiency Symptoms Of Mineral Elements In Plant Growth

Nitrogen

Role in plant

  • For protein synthesis
  • For chlorophyll production

Deficiency symptoms

  • Leaves turn pale green or yellow
  • Stunted growth
  • Small leaves, thin and weak stem

Phosphorus

Role in plant

  • For synthesis of energy rich compounds like ATP and NADP
  • Promotes root and branch growth
  • Regulates enzyme systems
  • For protein synthesis

Deficiency symptoms

  • Poor root, leaf and branch growth
  • Leaves become reddish purple

Potassium

Role in plant

  • It activates many enzyme controlled metabolic processes

Deficiency symptoms

  • Yellow leaves with dead spots, especially on the leaf margins and tips

Calcium

Role in plant

  • Promotes normal plant growth
  • Promotes cell wall formation

Deficiency symptoms

  • Poor development of stem, roots and leaves
  • Death of growing regions

Sulphur

Role in plant

  • For protein synthesis

Deficiency symptoms

  • Stunted growth (poor growth of terminal buds)
  • Yellow young leaves

Magnesium

Role in plant

  • For chlorophyll synthesis
  • Activates numerous enzymes

Deficiency symptoms

  • Leaves turn yellow (chlorosis)

Iron

Role in plant

  • For chlorophyll formation

Deficiency symptoms

  • Leaves turn yellow

Properties Of Food Substances

The basic food substances are

  1. Carbohydrates
  2. Proteins
  3. Lipids
  4. Vitamins

Properties Of Carbohydrates

There are three groups of carbohydrates: monosaccharides, disaccharides and polysaccharides.

(a) Properties of monosaccharides

  • They are soluble in water, forming a sweet tasting solution.
  • They can form crystals (they can crystallize).
  • They can combine by condensation to form disaccharides and polysaccharides.
  • They reduce Copper sulphate into Copper I sulphate if they are heated with it.

(b) Properties of disaccharides

  • They are soluble in water.
  • They are sweet tasting.
  • They can crystallize.
  • Some are reducing sugars and some are non-reducing sugars.

(c) Properties of polysaccharides

  • They are not sweet.
  • They are insoluble in water.
  • They cannot crystallize.

Properties Of Proteins

  • They dissolve in water but do not form a true solution. They form colloidal suspensions.
  • They are denatured by high temperature.
  • They are amphoteric. This means they react with both acids and bases.

Properties Of Lipids

  • They are insoluble in water.
  • They are inactive, so they are stored in the tissues of living organisms.
  • They form suspensions and emulsions when mixed with alcohol.
  • Fats melt at high temperature, while oils solidify at low temperature.

Food Processing, Preservation And Storage

Food processing

Food processing is the method of treating food substances to make them more appetizing or palatable. It also extends the life of the food for a long time without getting spoiled.

Food preservation

Food preservation is the method of keeping food substances in good condition. This prevents the food from decaying or getting spoiled.

Preservatives

Preservatives are chemicals added to food to prevent it from being spoiled by microorganisms. They do this by preventing the growth of microorganisms.

Food storage

Food storage means the methods of keeping food for future use without getting spoiled.

Importance Of Food Processing, Preservation And Storage

These methods prevent food from getting spoiled. Therefore they

  • Help to ensure a sustainable food supply even when it is not the season of that food.
  • Ensure a food supply (enough stock of food) for people living in countries that experience a long winter season.
  • Enable food to be transported from one region to another and reach the consumers without being spoiled.

Methods Of Food Preservation

There are two categories of methods of food preservation

  1. Traditional methods
  2. Modern methods

Traditional Methods Of Food Preservation

These include smoking, drying, boiling, salting and pickling.

Boiling

This method involves boiling food in water at a high temperature for some time. This kills the microorganisms which can decompose the food.

This method is good for preserving food for a short time.

Smoking

This method involves drying food by using smoke. The smoke kills microorganisms.

The food becomes dry, so it cannot easily be attacked by microorganisms, because they need a moist environment.

Examples of foods preserved by this method are fish and meat.

Drying in the sun

This method involves removing water from food by using the heat produced by the sun.

The food dries, which creates unfavorable conditions for the growth of microorganisms.

Foods preserved by this method are maize, rice, cassava, beans, pears, millet, sorghum, vegetables, meat and fish.

Salting

This method involves drying food by soaking it in a sodium chloride (table salt) solution, or by sprinkling salt on it. The salt helps to absorb water from the food.

This creates unfavorable conditions for the growth of microorganisms.

Foods preserved by this method include meat and fish.

Pickling

This method involves adding preservatives like honey. Honey does not contain substances that microorganisms need to grow.

Modern Methods Of Food Preservation

These include pasteurizing, refrigerating, freezing, canning and bottling. Additives are also used.

Pasteurizing

This involves heating food to a temperature above 60 °C for some time. This kills all the microorganisms that can decay the food.

An example is milk.

Refrigeration

In this method, food is stored at a very low temperature, below -10 °C. This stops the growth of microorganisms, so the food can stay for months.

Foods preserved by this method include meat, fish and fruits.

Canning

This method involves these steps

  1. Heat the food under pressure to kill all the microorganisms in it.
  2. Transfer the food into sterilized metal cans while it is still hot.
  3. Seal the cans, with the air sucked out.

Foods preserved by this method are meat, fish and baked beans.

Bottling

This method involves killing microorganisms using high pressure and heat. Then the food is transferred into clean, sterilized bottles.

The bottles are sealed air tight to prevent oxygen from getting in.

This method is used to preserve drinks such as soft drinks (soda, juices) and tomato sauce.

Additives

This method involves adding chemicals like salt, sugar and acids. These slow the growth of microorganisms in the food.

Differences Between Traditional And Modern Methods Of Food Preservation

Traditional methods

  • They are less expensive.
  • Food can be stored only for a short period of time.
  • They do not require advanced technology.
  • They somehow alter the taste, texture and color of the food.
  • They can be used everywhere, for example in rural areas with no electricity.

Modern methods

  • They are more expensive.
  • Food can be stored for a long period of time.
  • They require advanced technology.
  • They do not alter the taste, texture and color of the food.
  • They can only be used in areas with services like electricity.
Jaribu quiz ya BiologyMaswali 27