Forces that affects the earth
Dakika 13 za kusoma ·
Yaliyomo
Forces That Affect The Earth
Forces are the processes that operate (work) within or on the earth's crust.
There are different forces that affect the earth.
Internal Forces
Internal forces are forces which operate within the earth's crust. They are also called endogenetic or endogenic forces.
They are forces that operate within (inside) the earth's crust. Another way to say it: they are forces which operate beneath (under) the earth's surface.
These forces are generally referred to as TECTONIC FORCES.
Internal forces include vulcanicity and earth movements. Earth movements are horizontal (lateral) and vertical movements.
These forces may result in the formation of several landform features.
The internal forces (tectonic forces) are divided into two
- Earth movement (Diastrophism)
- Vulcanism / Vulcanicity / Volcanic eruptions
Earth Movements
Earth movement is the movement of the solid parts of the earth towards each other, away from one another, or sideways. It is also known as Diastrophism.
Types of earth movement
Earth movements are classified into two main groups
- Vertical or radial movements
- Lateral, horizontal or tangential movements
Vertical Or Radial Movements
These are upward and downward movements or forces.
These forces cause uplift (epeirogenic) and downward movement (cymatogenic).
The forces which cause vertical earth movements operate from the interior upward toward the surface, or downward from the surface to the interior.
Results of vertical movement
- The crustal rock faults. When faults develop, they produce features like plateaus, basins, block mountains (horst) and escarpments.
- The sea level changes, because the land is lifted upward or sinks.
NB: This change in sea level is not a eustatic change. It is due to vertical forces. A eustatic change is a change of sea level due to ice melt during ice ages.
Lateral Or Horizontal Movements
These are called orogenic forces (movements) because they are in the process of building mountains.
Orogenesis means the process of mountain building.
There are two types of lateral forces
- Compressional forces
- Tensional forces
Compressional forces
Compressional forces are forces which move towards each other, that is, they move against each other.
They tend to shorten the crust (the land). In other words, they squeeze the land.
Compressional forces cause the following
- Folding of land, hence Fold Mountains.
- Breaking of the land to form faulting, which may produce features like block mountains, rift valleys and faults.
Tensional forces
Tensional forces are forces that tend to stretch the land. They move away from each other and pull the land apart.
These forces cause faulting of the crust. They produce features like faults, block mountains and rift valleys.
Features Associated With Earth Movements
Rift valley
A rift valley is a trough or hollow. It may result from both vertical and lateral movements of the earth's crust.
It is formed when two faults develop parallel to each other.
It can develop by either tensional forces or compressional forces.
Formation of a rift valley by tensional forces
- Tensional forces move away from each other.
- These forces of tension produce faults.
- The block between two parallel faults subsides (sinks) to form a rift valley.
Formation of a rift valley by compressional forces
- Horizontal forces act towards each other.
- These forces of compression produce faults on the outside of the two parallel faults.
- The pieces of land on either side are lifted up above the general level of the ground. This forms a rift valley.
Examples of rift valleys
- East African rift valley – Africa
- Jordan rift valley – Asia
- Rhineland rift valley – Europe
Block mountain (horst)
A block mountain is a table-like mountain. It is formed by faulting that leads to rising of crustal rocks. It has a nearly flat surface.
A block mountain can be formed by either tensional or compressional forces. The earth's movements cause parallel faults, which result in uplifting of some parts.
Examples of block mountains
- Usambara and Uluguru, in Tanzania
- Ruwenzori, in Uganda
- Vosges and Black Forest, in Europe
- Mount Sinai, in Asia
Plateau
A plateau is a large, extensive uplifted part of the earth's crust. It is almost flat at the top. The top of a plateau is mostly a plain.
Plateaus were formed during the Mesozoic and Jurassic eras. This was due to uplifting of the earth's crust.
Examples are the East African and Brazilian plateaus.
High plateaus, especially in tropical latitudes, are used for agriculture and settlement.
Basin
A basin is a large, extensive depression on the earth's surface.
Most basins are formed by vertical movement of the earth.
Examples of basins include inland drainage basins, e.g. the Congo basin and the Chad basin, and the Amazon basin.
Volcanic Eruptions / Vulcanicity / Vulcanism
Vulcanicity is the range of processes by which molten materials and gases are either intruded (injected) into the earth's crust or extruded (ejected) onto the earth's surface.
Vulcanicity is the formation of various features due to the intrusion or extrusion of molten materials and gases.
The molten material is called magma when it is found within the earth's crust. When it is poured out on the earth's surface, it is called lava.
Vulcanism / Vulcanicity is a broader term. It includes both extrusive and intrusive igneous activities.
Volcanicity refers to extrusive activity, in which the materials are forced out onto the surface.
Types of vulcanicity
There are two types of vulcanicity
- Intrusive volcanic features
- Extrusive volcanic features
- INTRUSIVE VOLCANIC FEATURES
This is when magma is intruded within the earth's interior.
The features that result from intrusive volcanic activity are called intrusive features. They are found within the earth's interior.
They include the following
- Sill: a rock sheet formed when magma solidifies horizontally along the bedding plane. Example: Tyolo scarp in Malawi.
- Dyke: a rock sheet formed when magma solidifies vertically across the bedding planes. Example: Kinkon.
- Laccolith: a dome-shaped mass of rock with a flat base, formed from viscous lava. It looks like a mushroom. Example: the laccolith found in Morafonobe in Madagascar.
- Lapolith: a saucer-shaped mass of rock formed in a geosyncline. It forms a saucer-like shape, maybe due to the increased weight of the deposits.
- Phacolith: a lens-shaped strip of igneous rock formed when magma solidifies along an anticline or syncline. Example: Cordon Hills in U.K.
- Batholith: a large mass of solidified rock formed when magma cools plutonically at great depth. Batholiths are found at the heart of mountain ranges. Example: Chilu Batholith in Gabon.
- EXTRUSIVE VOLCANIC FEATURES
Extrusive volcanic features are the features formed when magma cools and solidifies on the earth's surface.
The extrusive volcanic features can be classified into the following
Forces That Affect The Earth
Volcanic Features
Types of volcanic features
- Central features
- Fissure features
Central Features
Central features are due to violent eruptions. They include the following.
Ash and cinder cone
Lava is blown to great heights when it is violently ejected. It breaks into small fragments. The fragments fall back to earth and build up a cone.
Examples: Busoka and Bitale in south west Uganda.
Composite cone
This type of cone is formed of alternate layers of lava and ash.
Each eruption begins with great violence and forms a layer of ash. As the eruption proceeds, the violence ceases. Lava then pours out and forms a layer on top of the ash.
Lava often escapes from the sides of the cone. There it builds up small conelets.
Examples: Mount Kilimanjaro in Tanzania and Mount Cameroon.
Volcanic plug (plug dome volcano)
This is a rigid cylindrical plug. It forms when very viscous lava is forced out of the volcano and makes a plug dome. The plug dome may completely block the vent.
Good examples of plug domes are in the Atakor volcanic area of the Haggar mountains in Algeria. There are almost 300 plug domes in this region.
Crater
A crater is a depression formed on the summit of the cone after the plug dome has been blown off the top of the cone.
Caldera
A caldera is a large crater. It forms when the upper part of the volcano is either bombarded away by violent eruptions or subsides into the crust.
Examples: Alaska, Ngorongoro in Tanzania, Eboga in Cameroon.
Features Due To Peaceful Eruptions
The lava coming out through the vent can be acidic, and hence viscous. It can also be basic, and hence less viscous.
The following are the central features due to peaceful eruptions.
Acid lava cone (composite dome volcano)
This is a dome shaped volcano with convex slopes. It forms when acidic lava solidifies around the vent.
Example: Ntumbi dome (Mbeya).
Shield volcano
This is an extensive cone with gentle sloping sides. It forms when basic lava (basalt) is poured on the surface and spreads to occupy a large area.
Sometimes these features form when lava comes out through a single fissure or many fissures.
Fissure Eruption
A fissure eruption involves lava coming out through a crack or fault. The feature formed is called a lava plateau.
Minor Volcanic Features
A variety of minor volcanic forms can be distinguished. They are usually, though not necessarily, associated with volcanoes approaching extinction. They include the following.
- Mofette: a volcano which emits carbon dioxide gas.
- Hot spring: a volcano which emits hot water with dissolved minerals in suspension. Hot springs mostly occur on islands or in some African countries such as Kenya and Ethiopia.
- Solfatara: a volcano which emits sulphur gas.
- Fumarole: a volcano which emits steam, mud and gases other than sulphur. It is the outflow of super-heated water from the ground. The water contains some mineral substances in solution or in suspension.
- Geysers: the forceful emission of hot water from the ground to a high level in the atmosphere. The emitted water contains fine material. This forms a mud volcano, which later can lead to the formation of very fertile soil.
Types Of Volcanoes According To Activity
There are three types of volcanoes according to activity. These are
- Active volcano: a volcano which erupts frequently. Examples: Oldonyo Lengai in Tanzania and Mount Cameroon.
- Dormant volcano: a volcano which has stopped erupting but is not extinct, and it is expected to erupt. It is also known as a sleeping volcano.
- Extinct volcano: a volcano which has stopped erupting for a very long time in history and is not expected to erupt. It is also known as a dead volcano.
Influences Of Volcanic Eruption On Man And Environment
The following are the economic importance of volcanic eruptions to man.
- Lava on weathering leads to the formation of very fertile soil, which supports agriculture.
- Volcanic eruption leads to the formation of mineral deposits. Examples: the copper deposits of Butte in USA and the diamonds of Kimberley in South Africa.
- Volcanic eruption provides geothermal power for electric generation.
- Some hot springs are used for heating homes in glaciated regions.
- Volcanic features attract tourists.
- Volcanic cones are the source of rivers.
Earthquake
An earthquake is a sudden earth movement or vibration in the earth's crust.
Causes of earthquakes
- One tectonic plate slides over or past another plate along the line of a fault.
- Volcanic eruption. This is the movement of molten rock below or onto the earth's crust, which in turn is caused by the movement of plates.
The Nature Of Earthquakes
- The point at which an earthquake originates is called the focus. Sometimes it is several kilometres below the surface.
- The point on the earth's surface immediately above the focus is called the epicentre. This is where the shock waves first hit the surface.
It is the shock waves which give rise to an earthquake.
Types Of Shock Waves
There are two types of shock waves.
- Body waves:
These are waves which travel through the crust. They are of two types.
- Primary waves: these cause the crustal rock to move back and forth in the direction of wave movement.
- Secondary waves: these cause the crustal rock to move side to side, that is, at right angles to the direction of wave movement.
- Surface waves:
These travel along the surface. They are of two types.
- Love waves: these cause the surface rock to move side to side, at right angles to the direction of wave movement.
- Rayleigh waves: these cause the surface rock to move in a circular way, very similar to the movement of a water wave.
Detecting Magnitude And Intensity
The intensity of an earthquake is measured by an instrument called a seismograph. A seismograph records the vibration produced by an earthquake.
The magnitude of an earthquake is the total amount of energy released. The scale which gives the magnitude is called the Richter scale. The scale ranges from 0 to 8.9.
Effects Of Earthquakes
Example: the earthquake that occurred in Bukoba, Tanzania on 10 September 2016 measured 5.7 on the Richter scale.
The effects include the following.
- Rise and fall of the sea floor. Example: the Agadir earthquake in Morocco in 1960.
- Displacement of the earth's crust. It can happen vertically or laterally.
- Landslides, and deep cracks opening in the surface rocks. Example: the El Asnam earthquake in Algeria in 1954 destroyed an area of radius 40 km and opened surface cracks up to 3 m deep.
- Destruction of infrastructure and property.
- Loss of life. Earthquakes can lead to deaths.
- They can raise or lower eroded rocks. Example: in Alaska, the earthquake of 189 led to the raising of some rock by about 16 km.
The Causes Of Earthquakes
Faulting of the lithosphere
Faulting of the lithosphere is caused by tectonic movement, where one plate slides over another plate.
Volcanism
Volcanism can cause earthquakes. This is because magma moves under the influence of intense pressure from within the earth's interior.
Mass wasting
Mass wasting, like a landslide or rock fall, can cause an earthquake. However, this happens on a local scale only.
Falling objects from the atmosphere
Objects such as meteorites may lead to shaking of the earth's crust.
Man's influence
Man's activities can also cause earthquakes. These include
- Mining using explosives like dynamites.
- Use of transport vessels like trains and heavy trucks.
Effects Of Earthquakes
- Loss of life and property.
An earthquake is a natural disaster. For example, the earthquake that hit Toro in Uganda in 1966 killed 157 people. It injured about 1300 people and destroyed about 6000 houses.
Earthquakes also displace parts of the earth's crust, vertically or laterally.
- They can raise or lower parts of the sea floor.
The Agadir earthquake in Morocco in 1960 raised the sea floor off the coast. In some areas the depth of the sea decreased from 400 m to 15 m after the earthquake.
- They can raise or lower coastal rocks.
In the Alaskan earthquake of 1899, some coastal rocks were raised by 16 m.
- They can cause landslides and open up deep cracks in the surface rocks.
The El Asnam earthquake in Algeria, in 1954, destroyed an area of radius 40 km. It opened up deep cracks up to 3 m deep.
- Destruction of infrastructure and houses.
The Bukoba earthquake in Tanzania in 2016 left more than 100 people without settlement.
Precautionary Measures To Avoid High Damage From Earthquakes
- Do not build high-rising structures on land vulnerable to earthquakes. Strengthen buildings by using reinforced concrete, steel frames, deep foundations and light roofs.
- Geologists should detect epicentres and tell people to evacuate the places likely to be affected by earthquakes.
- Avoid constructing very large water bodies like the Kariba dam. They can cause earthquakes because of the weight of water and other materials.
- Discourage the use of explosives like dynamites in breaking rocks during mining and construction operations.
