Movement
Dakika 15 za kusoma ·
Yaliyomo
Movement
Concept Of Movement And Locomotion
Movement is one of the characteristics of living organisms.
By definition, movement is the act of changing the position or posture of an organism, or of a part of an organism.
Movement in animals
In animals, movements happen in response to changes in the environment.
Animals move from one place to another to search for things or materials they need for survival. They also move to search for mates for reproduction.
This type of movement involves the whole body of the organism moving from one point to another. It is called locomotion.
Movement in plants
In plants, movement involves the growth of parts of the plant away from or towards a certain environmental factor. Examples of such factors are water, minerals or light.
Types of movement in living things
Living things show one of these two types of movement
- Free locomotory movement (locomotion): the movement of the whole body of an organism. This movement is for animals.
- Movement brought about by growth (growth curvature): the movement of a part of an organism. This movement is for plants.
Propulsion
Locomotion involves a force that drives an organism forward. This force is called propulsion. For example, a fish uses its tail to create this force.
An organism should have a rigid framework of tissues that prevents it from falling. It should also be steady (stable), so that it does not fall or change its direction.
Different types of movement
Living organisms show different types of movement. These are
- Amoeboid movement
- Ciliary movement
- Flagella movement
- Muscular movement
- Tropic movement
- Nastic movement
Tropic and nastic movements are shown by plants.
Amoeboid Movement
Amoeboid movement is shown by some protozoa, for example the amoeba. It is also shown by white blood cells in mammals.
In this movement, the cytoplasm streams in a way that forms projections called pseudopodia.
The pseudopodia extend further in the same direction. This causes more cytoplasm to flow into them.
This brings about the movement of the organism.
Movement
Types Of Movement
Ciliary movement
This type of movement is found in protozoa such as Paramecium and in larvae of some aquatic organisms.
These organisms are covered with small hair-like structures called cilia on their body surfaces. Organisms that have cilia are called ciliates.
The cilia beat backward and forward in water. When the cilia move against the water, they create a force that propels the organism forward.
Flagella movement
This type of movement is found in flagellates. Flagellates are organisms that have a whip-like structure called a flagellum (plural: flagella).
Examples are Euglena, Chlamydomonas, Trypanosoma and some bacteria.
The flagellum whips and makes water swirl around the organism. This makes the organism rotate and move forward.
Muscular movement
This type of movement is found in vertebrates such as mammals, reptiles, amphibians and fish.
It is caused by the force produced when muscles contract and relax.
The skeleton supports muscular movement. It provides anchorage points for muscles and maintains the shape of the organism.
Tropic movement
This type of movement is found in plants. The plants move towards the stimulus.
Nastic movement
This type of movement is found in plants. It is caused by a non-directional source of stimulus.
Movement Of The Human Body
Human skeletal system
Like in other mammals, support and movement in humans are brought about by the skeleton and muscles.
The human skeleton is made up of bones and cartilages. They are connected together at points called joints.
A bone is a hard, tough connective tissue. It is composed of mineral salts such as calcium and phosphate.
Cartilage is a soft skeletal connective tissue. It is found at the ends of bones at the joints. It is also found in other parts of the body such as the trachea, nose, pinna of the ears and oesophagus.
The human skeletal system is divided into two parts: the axial skeleton and the appendicular skeleton.
Axial Skeleton
The axial skeleton has four parts
- The skull
- The ribcage
- The sternum
- The vertebral column
The skull
The skull is made up of the cranium. The cranium is made of small bones joined together.
There are two jaws. The upper jaw is fused to the cranium. The lower jaw is articulated to the cranium. The lower jaw and the cranium are connected by muscles.
The skull protects the brain, olfactory organs, the middle and inner parts of the ear, and the eyeballs against different kinds of injuries.
Sternum and ribcage
The ribcage is made of flattened, curved bones called ribs.
At the back, the ribs are joined to the vertebral column. At the front, they are joined to the sternum. Their joints allow the ribs to move during breathing.
The sternum is made up of small fused bones called sternebrae.
Together, the ribcage and sternum form the thoracic cage. It covers the thoracic cavity. It protects the heart, lungs and main blood vessels from mechanical damage.
Vertebral column
The vertebral column is also known as the backbone.
It is composed of 33 small bones called vertebrae. They are joined together from the base of the skull to the pelvis.
Between two vertebrae there is a cartilage called the intervertebral disc. It acts as a shock absorber. It also prevents friction between the adjacent vertebrae.
The vertebral column supports the trunk. It also protects the spinal cord against physical damage.
There are five types of vertebrae
- Cervical vertebrae
- Thoracic vertebrae
- Lumbar vertebrae
- Sacral vertebrae
- Caudal vertebrae
Cervical vertebrae
These bones are found in the neck. They are short and seven in number.
The first two cervical vertebrae are called the atlas and the axis. These two bones join to form a joint that allows side movement of the skull.
The skull and the atlas join to form a joint that allows up and down movement of the skull.
Figure: Cervical vertebrae
Thoracic vertebrae
These bones are found in the thoracic region. They are twelve in number.
They are joined to the ribs at the back and to the sternum at the front.
Together with the ribs and sternum, the thoracic vertebrae form the thoracic cage.
Figure: Thoracic vertebrae
Lumbar vertebrae
These are found in the lumbar region. They are five in number.
They allow bending, sideways movements and rotation of the trunk.
The large muscles of the abdomen are attached to them.
Figure: Lumbar vertebrae
Sacral vertebrae
These are found in the sacral region. They are fused to form the sacrum.
The sacrum provides a large surface area for attachment of the muscles of the back.
The weight of the body of a stationary human is passed to the pelvic girdle and legs through the sacrum.
Caudal vertebrae
These are found in the tail region. Their number varies from animal to animal, depending on tail size.
Man has no tail. So there are only four vertebrae, fused together to form the coccyx.
Appendicular Skeleton
The appendicular skeleton is composed of the appendages or limbs. They are attached to the axial skeleton.
All animals have limbs designed on the same plan, called the pentadactyl limb plan. This means each limb ends with five digits (fingers or toes).
Types of limbs
There are two types of limbs: forelimbs and hindlimbs.
Forelimbs
Forelimbs are attached to the axial skeleton at the anterior part of the body.
They comprise the following parts
- Pectoral girdle
- Humerus
- Ulna
- Radius
- Carpals
- Metacarpals
- Phalanges
Pectoral girdle
The pectoral girdle has two separate halves. Each half is made up of the scapula, the coracoid and the clavicle bones. They are attached to the vertebral column by ligaments and muscles.
This arrangement lets the pectoral girdle and its limbs move through a great variety of movements and angles.
The girdle is strong enough to support the weight of a quadruped animal when it is stationary. It also acts as a shock absorber when the animal lands at the end of a jump.
The scapula is a flat, triangular bone. It overlies a number of anterior ribs.
At its apex the scapula has a concave depression called the glenoid cavity.
The glenoid cavity articulates with the head of the humerus. Together they form a ball and socket joint.
Adaptations of the scapula
- It has a glenoid cavity. This provides a surface for articulation with the head of the humerus, to allow movement of the arm.
- It has a broad, flattened surface. This provides a large surface area for muscle attachment.
- It has projections called acromion and metacromion. They increase the surface area for muscle attachment.
- It has a long spine. This provides a large surface area for muscle attachment.
- It is bony. This provides support and strength.
Humerus
The humerus is a single bone found in the upper part of the forelimb.
It has a head at its upper end. The head articulates with the glenoid cavity of the scapula. This forms a ball and socket joint at the shoulder, which allows a wide range of movement.
Adaptations of the humerus
- It has a rounded head that fits into the glenoid cavity of the scapula. This allows greater flexibility of movement of the arm.
- It is long. This provides a large surface area for attachment of the biceps and triceps muscles.
- It has a trochlea at the lower end for articulation with the forearm. This allows movement in one plane.
Ulna and radius
These are two bones that form the forearm. The ulna is longer than the radius.
The radius is found on the side where the thumb is located. It is a flattened bone, slightly curved and simple in design.
Muscles can rotate the radius about the ulna. This lets the palm of the hand be turned downwards.
The ulna and radius articulate with a number of small bones that form the wrist.
Adaptations of the ulna and radius
- They are long. This provides a large surface area for attachment of the muscles of the forearm.
- The ulna has an olecranon process with a sigmoid notch. It articulates with the trochlea of the humerus, to allow movement in one plane.
- They are bony and strong. This provides support.
Carpals, metacarpals and phalanges
Carpals are nine small bones that form the wrist.
They articulate with the radius and ulna at the upper end. They articulate with the metacarpals at the lower end.
Metacarpals form the skeleton of the hand. They are five in number. Their lower ends articulate with the phalanges.
Phalanges form the skeleton of the fingers.
Hindlimbs
The hindlimbs are attached to the axial skeleton at the posterior part of the body.
They comprise the following parts
- Pelvic girdle
- Femur
- Tibia
- Fibula
- Tarsals
- Metatarsals
- Phalanges
Pelvic girdle
The pelvic girdle comprises two pubic bones. They fuse ventrally to form the pubis symphysis. It also has three bones, namely the pubis, femur and ilium, which fuse together completely.
The size of the pelvic cavity is very important in females during birth. The pelvic girdle is widened by the hormone relaxin during birth.
Adaptations of the pelvic girdle
- It is broad and flattened. This provides a large surface area for attachment of muscles.
- It is funnel shaped. This supports the weight of the upper part of the body.
- It has grooves. They provide a surface for articulation with the head of the femur, to allow movement in all planes.
Femur
The femur is a long bone found in the upper part of the hindlimb.
Its upper head is round. It articulates with the acetabulum of the pelvic girdle. This forms a ball and socket joint at the hip.
Joints
A joint is the point where two bones meet. Joints allow movement of different parts of the body.
In the mammalian skeleton there are different types of joints. They are put into two groups: fixed (immovable) joints and movable joints.
Fixed (Immovable) Joints
These joints do not allow any movement. They are found in the cranium (cranium joints) and in the pelvic girdle.
Movable Joints
Movable joints allow movement of body parts. There are several types
- Pivot joints
- Gliding (sliding) joints
- Hinge joints
- Ball and socket joints
Pivot joint
This joint is found between the first and second cervical vertebrae.
The axis (second cervical vertebra) fits into the ring of the atlas (first cervical vertebra). This allows the head to turn within that ring.
Therefore, this joint allows side movements of the head.
Sliding joints
These joints are found between the vertebrae. They are also found at the wrist and the ankle.
Between the vertebrae there is a large cartilage called the intervertebral disc. It prevents friction during movement.
Ball and socket joints
These joints are found at the hip and the shoulder.
In this joint, the head of one bone looks like a ball. It fits into the cavity (socket) of the other bone.
Examples
- At the shoulder, the rounded head of the humerus fits into the socket of the scapula.
- At the hip, the rounded head of the femur fits into the socket of the pelvic girdle.
Ball and socket joints have synovial fluid, which reduces friction. These joints also allow rotation of the limbs in all planes.
Hinge joints
These joints are found at the elbow and the knee.
A hinge joint works like the hinge of a door. It allows movement in one plane only.
Adaptation Of Joints To Movements
- The bones of movable joints are covered with a layer of cartilage. It reduces friction between the bones during movement.
- Joints whose bones support weight have a kind of cushion that absorbs compression. An example is the intervertebral disc in the joints of the vertebrae.
- Freely movable joints have ligaments. Ligaments hold the bones together and so prevent dislocation of the bones. The cushion in these joints is provided by synovial fluid.
- The ends of the bones are spongy. This helps them absorb compression caused by the weight of the body.
Muscles And Movements
The skeleton alone cannot bring about locomotion. Muscles and the skeleton are needed together to cause movement.
Muscles are attached to the bones at both ends by strong, inelastic fibres called tendons.
There are three types of muscles
- Skeletal muscles
- Cardiac muscles
- Smooth muscles
Skeletal muscles
These muscles are attached to the skeleton. They are responsible for locomotion and for voluntary movements of the body.
For this reason they are also called voluntary muscles. They are controlled by the voluntary nervous system.
Skeletal muscles can contract and relax for some time, but in the end they become tired. This is why they ache after a long period of exercise and need rest.
Smooth muscles
These muscles are found in the lining of the gut, bladder, uterus, sperm duct, blood vessels and the iris of the eyes. They are also found in the liver, lungs, heart and kidneys.
They contain elongated cells that can contract and shorten.
They are controlled by the involuntary nervous system. This is why they are called involuntary muscles.
Cardiac muscles
These muscles are found in the walls of the heart chambers. They are striated and are under the involuntary nervous system.
They can contract and relax without becoming fatigued. This enables the heart to beat for the whole lifetime of an animal.
How Muscles Facilitate Movement
The contraction and relaxation of muscles bring about movement.
The bending and straightening of the arm is done by two sets of muscles. They are attached inside and outside the hinge joint. These muscles are the biceps and the triceps.
- To bend the arm, the biceps contract and the triceps relax.
- To straighten the arm, the triceps contract and the biceps relax.
The biceps are also called flexor muscles. The triceps are also called extensor muscles.
The action of the biceps and triceps is antagonistic.
Muscle Cramps
Muscle cramps are sudden involuntary contractions of a muscle or a group of muscles.
Cramps in the intestinal muscles are called colic. Cramps in skeletal muscles occur after a period of prolonged exercise.
Causes of muscle cramps
- Muscle fatigue
- Dehydration
- Lack of magnesium or calcium in the body
- Vigorous exercise
- Injury
Prevention of muscle cramps
- Stretching and warming the affected muscles
- Taking in a solution of water and salt
If the muscle cramp continues, consult a doctor.
Movement In Plants
Unlike animals, plants cannot locomote (move from one place to another). They remain fixed to the ground.
This does not mean they do not move. Their leaves, roots and stem move as a growth response. The response may be induced by an external or internal stimulus. This type of movement is called growth curvature.
Growth movements enable plants to obtain their essential requirements, such as light, water and mineral salts. They also help plant parts to move away from unfavourable conditions.
So, growth curvature is the growth movement of plants away from or towards a stimulus.
Growth movements in plants may be autonomic movements or paratonic movements.
- In autonomic movements, the plant itself controls the movement. An example is the growth of meristematic regions.
- In paratonic movements, the movement is induced by an external stimulus. Examples of stimuli are light, moisture, chemicals, gravity or touch.
Paratonic movements include two types: tropic movements and nastic movements.
Tropic movement
In tropic movement, plant growth is induced by a stimulus. The plant may respond by moving towards the stimulus or away from it.
- If the plant grows towards the stimulus, it is called a positive response.
- If the plant grows away from the stimulus, it is called a negative response.
Examples of tropic movements
- Phototropism: the growth movement of a plant part (shoots) towards a light source.
- Hydrotropism: the growth movement of a plant part (roots) in response to a water source.
- Thigmotropism: the growth movement of a plant part in response to touch.
- Chemotropism: the growth movement of a plant in response to a source of chemical.
- Geotropism: the growth movement of plant parts in response to gravity.
Example of geotropism
- The plant stem grows away from gravity. This is negative geotropism.
- The plant roots grow towards gravity. This is positive geotropism.
Nastic movement
Nastic movements are non-directional movements of plant parts in response to stimuli. An example is the closing of flowers or leaves in response to light.
